A W-band source module using MMIC's

A W-band source module providing 4-GHz tuning bandwidth (92.5-96.5 GHz) has been developed. This module consists of three MMIC chips: a 23.5 GHz HBT VCO, a 23.5-94 GHz HEMT frequency quadrupler and a W-band three-stage HEMT output amplifier, all fabricated in TRW production lines. It exhibits a measured output power of 3 dBm at 94-95 GHz and a 3-dB tuning bandwidth greater than 3 GHz, with a phase noise of -92 dBc/Hz at 1 MHz offset. This work demonstrates a new and efficient way to implement high performance W-band source. Its wide tuning bandwidth with good phase noise performance, as well as design simplicity, makes this approach attractive for many W-band system applications     

Iterative restoration of MR images corrupted with translational motion

Patient motion during the acquisition of magnetic resonance imaging data causes loss of resolution and ghost repetitions of the moving structures in the reconstructed image. In this paper the motion is modeled as being translational, and it is shown that this causes either the magnitude or the phase of the data to be corrupted, depending upon whether the motion is within or perpendicular to the imaging plane. The problem of restoring the image using only the corrupted data and no knowledge about the motion is addressed. The restoration problem is nonlinear in general, but is linear in two special cases. An iterative algorithm is developed that uses projections onto convex sets for magnitude retrieval and generalized projections for phase retrieval. In both cases constraint sets containing all a priori knowledge are used, and this is shown to be necessary for rapid convergence. The two algorithms may be combined to restore images corrupted by three-dimensional motion. The algorithms were verified using simulated data.     

Towards van der Waals Epitaxial Growth of GaAs on Si using a Graphene Buffer Layer

Van der Waals growth of GaAs on silicon using a two‐dimensional layered material, graphene, as a lattice mismatch/thermal expansion coefficient mismatch relieving buffer layer is presented. Two‐dimensional growth of GaAs thin films on graphene is a potential route towards heteroepitaxial integration of GaAs on silicon in the developing field of silicon photonics. Hetero‐layered GaAs is deposited by molecular beam epitaxy on graphene/silicon at growth temperatures ranging from 350 °C to 600 °C under a constant arsenic flux. Samples are characterized by plan‐view scanning electron microscopy, atomic force microscopy, Raman microscopy, and X‐ray diffraction. The low energy of the graphene surface and the GaAs/graphene interface is overcome through an optimized growth technique to obtain an atomically smooth low­ temperature GaAs nucleation layer. However, the low adsorption and migration energies of gallium and arsenic atoms on graphene result in cluster‐growth mode during crystallization of GaAs films at an elevated temperature. In this paper, we present the first example of an ultrasmooth morphology for GaAs films with a strong (111) oriented fiber‐texture on graphene/silicon using quasi van der Waals epitaxy, making it a remarkable step towards an eventual demonstration of the epitaxial growth of GaAs by this approach for heterogeneous integration.     

Proton relaxation enhancement by manganese(III)TPPS4 in a model tumor system

Managanese(III)tetraphenylporphine sulfonate [Mn(III)TPPS4] has been investigated as a tumor specific paramagnetic contrast agent for magnetic resonance imaging (MRI) of L1210 solid tumors in mice. Mn(III)TPPS4 was found to clear rapidly from the blood and concentrate in the kidneys, tumor and liver. Although relatively high ratios of tumor to normal tissues could be obtained (e.g., greater than 90 for tumor/muscle), the kidneys were found to have the highest concentration of the metalloporphyrin at all doses and time periods tested. A significant decrease in the longitudinal relaxation time was measured for excised tissues (kidney, tumor, liver, muscle) from mice that were treated with Mn(III)TPPS4. A linear correlation was observed between the longitudinal relaxation rate determined for L1210 tumor and the corresponding concentration of Mn(III)TPPS4 found at various injected doses and time intervals between the injection and analysis. A small animal radiofrequency receiver coil designed for use with a 0.15-T clinical imager was employed to evaluate the ability of Mn(III)TPPS4 to selectively increase the signal intensity of the implanted L1210 tumor. The images show a conspicuous enhancement in the contrast between the tumor and adjacent tissue upon treatment with this agent. The results indicate that Mn(III)TPPS4 is a useful prototype paramagnetic metalloporphyrin MRI contrast agent with a significant affinity for the L1210 tumor.     

Nanohybrid Materials with Tunable Birefringence via Cation Exchange in Polymer Films

In this work, a nanohybrid material based on a freestanding polymeric liquid crystal network capable of postmodification via cation exchange to tune birefringence is proposed. The smectic liquid crystal films can be infiltrated with a variety of cations, thereby changing the refractive indices (n_e and n_o) and the effective birefringence (Δn) of the nanohybrid material, with reversible cation infiltration occurring within minutes. Birefringence could be tuned between values of 0.06 and 0.19, depending on the cation infiltrated into the network. Upon infiltration, a decrease in the smectic layer spacing is found with layer contraction independent of the induced change in birefringence. Potential applications are in the field of specialty optical devices, such as flexible, retunable reflective filters.     

Thermodynamic equilibrium between locally excited and charge-transfer states through thermally activated charge transfer in 1-(pyren-2′-yl)-o-carborane

Reversible conversion between excited-states plays an important role in many photophysical phenomena. Using 1-(pyren-2′-yl)-o-carborane as a model, we studied the photoinduced reversible charge-transfer (CT) process and the thermodynamic equilibrium between the locally-excited (LE) state and CT state, by combining steady state, time-resolved, and temperature-dependent fluorescence spectroscopy, fs- and ns-transient absorption, and DFT and LR-TDDFT calculations. Our results show that the energy gaps and energy barriers between the LE, CT, and a non-emissive ‘mixed’ state of 1-(pyren-2′-yl)-o-carborane are very small, and all three excited states are accessible at room temperature. The internal-conversion and reverse internal-conversion between LE and CT states are significantly faster than the radiative decay, and the two states have the same lifetimes and are in thermodynamic equilibrium.

Reversible conversion between excited-states is key to many photophysical phenomena. We studied the equilibrium between LE and CT states by time-resolved and temperature-dependent fluorescence, fs- and ns-transient absorption, and LR-TDDFT calculations.     

A structure determination protocol based on combined analysis of 3D-ED data,powder XRD data,solid-state NMR data and DFT-D calculations reveals the structure of a new polymorph of l-tyrosine

We report the crystal structure of a new polymorph of l-tyrosine (denoted the β polymorph), prepared by crystallization from the gas phase following vacuum sublimation. Structure determination was carried out by combined analysis of three-dimensional electron diffraction (3D-ED) data and powder X-ray diffraction (XRD) data. Specifically, 3D-ED data were required for reliable unit cell determination and space group assignment, with structure solution carried out independently from both 3D-ED data and powder XRD data, using the direct-space strategy for structure solution implemented using a genetic algorithm. Structure refinement was carried out both from powder XRD data, using the Rietveld profile refinement technique, and from 3D-ED data. The final refined structure was validated both by periodic DFT-D calculations, which confirm that the structure corresponds to an energy minimum on the energy landscape, and by the fact that the values of isotropic ¹³C NMR chemical shifts calculated for the crystal structure using DFT-D methodology are in good agreement with the experimental high-resolution solid-state ¹³C NMR spectrum. Based on DFT-D calculations using the PBE0-MBD method, the β polymorph is meta-stable with respect to the previously reported crystal structure of l-tyrosine (now denoted the α polymorph). Crystal structure prediction calculations using the AIRSS approach suggest that there are three other plausible crystalline polymorphs of l-tyrosine, with higher energy than the α and β polymorphs.

A new polymorph of l-tyrosine is reported, with the crystal structure determined by combined analysis of 3D-ED data and powder XRD data, augmented by information from periodic DFT-D calculations and solid-state ¹³C NMR data.     

Current and frequency modulation characteristics for continuous-wave quantum cascade lasers at 9.06 μm

We report the characteristics of current induced frequency modulation (FM) for two continuous-wave quantum cascade lasers (QCLs) at 9.06 μm. Both the frequency tuning rate and the phase shift between intensity modulation and FM are measured at different modulation frequencies from 10 Hz to 200 kHz. The frequency tuning rate of the QCLs depends on both the modulation frequency and amplitude. The tested QCL has been used to detect ambient water vapor with wavelength modulation spectroscopy for validation with a numerical model.     

The work function of hydrothermally synthesized UO2 and the implications for semiconductor device fabrication

The photoelectric work function of nearly stoichiometric (111) and (100) hydrothermally grown UO₂ was measured to be 6.28 ± 0.36 eV and 5.80 ± 0.36 eV, respectively. Candidate metals for electrical contacts are identified for both rectifying and non‐rectifying contacts based on work function, lattice compatibility, and electrical conductivity.     

High-frequency acoustic emissions generated by a 20 kHz sonochemical horn processor detected using a novel broadband acoustic sensor: a preliminary study

This paper describes the application of a novel broadband acoustic sensor to evaluating the acoustic emissions from cavitation produced by a typical commercial 20 kHz sonochemical horn processor. Investigations of the reproducibility of the processor, and of the variation in cavitation emissions as a function of output setting and sensor location are described, and resulting trends discussed in terms of the broadband integrated power in the megahertz frequency range. Companion studies with a conventional membrane hydrophone have illustrated for the first time that cavitation emissions produced by a sonochemical horn processor can extend to frequencies beyond 20 MHz, and the sensor shows that significant nonlinearity can be seen in measured cavitation activity with increasing nominal output power.