Gold nanoshells on polystyrene cores for control of surface plasmon resonance

A method is presented for synthesizing core-shell structures consisting of monodisperse polystyrene latex nanospheres as cores and gold nanoparticles as shells. Use of polystyrene spheres as the core in these structures is advantageous because they are readily available commercially in a wide range of sizes, and with dyes or other molecules doped into them. Gold nanoparticles, ranging in size from 1 to 20 nm, are prepared by reduction of a gold precursor with sodium citrate or tetrakis(hydroxymethyl)phosphonium chloride (THPC). Carboxylate-terminated polystyrene spheres are functionalized with 2-aminoethanethiol hydrochloride (AET), which forms a peptide bond with carboxylic acid groups on their surface, resulting in a thiol-terminated surface. Gold nanoparticles then bind to the thiol groups to provide up to about 50% coverage of the surface. These nanoparticles serve as seeds for growth of a continuous gold shell by reduction of additional gold precursor. The shell thickness and roughness can be controlled by the size of the nanoparticle seeds as well as by the process of their growth into a continuous shell. By variation of the relative sizes of the latex core and the thickness of the gold overlayer, the plasmon resonance of the nanoshell can be tuned to specific wavelengths across the visible and infrared range of the electromagnetic spectrum, for applications ranging from the construction of photonic crystals to biophotonics. The position and width of the plasmon resonance extinction peak are well-predicted by extended Mie scattering theory.     

Synthetic applications of aryl radical building blocks for cyclisation onto azoles

2-(2-Bromophenyl)ethyl groups have been used as building blocks in radical cyclisation reactions onto azoles to synthesise tri- and tetra-cyclic heterocycles. 2-(2-Bromophenyl)ethyl methanesulfonate was used to alkylate azoles (imidazoles, pyrroles, indoles and pyrazoles) for the synthesis of the radical precursors. Cyclisations of the intermediate aryl radicals yield new 6-membered rings attached to the azoles. The aryl radicals undergo intramolecular homolytic aromatic substitution onto the azole rings. Tributylgermanium hydride has been used with success to replace the toxic and troublesome tributyltin hydride. Initial studies show that the protocol can be used on solid phase resins. The molecular and crystal structures of methyl 5,6-dihydroimidazo[5,1-a]iso-quinoline-1-carboxylate and methyl 5,6-dihydroimidazo[2,1-a]isoquinoline-3-carboxylate were determined by X-ray crystallography.     

Influence of synthesis route on the properties of doped lanthanum cobaltite and its performance as an electrochemical reactor for the partial oxidation of natural gas

La(0.6)Sr(0.4)Co(0.2)Fe(0.8)O(3-delta)(LSCF) perovskite powders have been synthesised by solid-state reaction, co-precipitation, drip pyrolysis and citrate gel routes, and characterised using XRF, XRD, SEM and BET. Co-precipitation using oxalic acid or aqueous ammonia as precipitant failed to achieve the correct chemical composition. Perovskite structures were achieved in all other cases. Surface areas ranging from 0.6 to 17.4 m(2) g(-1) were obtained, which was reflected in the different microstructures observed. The citrate gel product exhibited a convoluted network morphology resulting in its large surface area. Thin-walled (approximately 200 microm) tubular membranes have been manufactured from the LSCF powders using viscous plastic processing. The tubes have been characterised using a custom-built gas analysis rig with on-line mass spectrometry. Porosity levels of the membranes were found to be very low (<0.1%). The spontaneous oxygen flux across the tubular membranes was determined as a function of temperature. Oxygen permeation rates ranged from 0.1 to 0.3 micromol cm(-2) s(-1) at 1273 K. The catalytic behaviour of the LSCF tubes towards methane oxidation has been studied using temperature programmed reaction and conventional catalytic measurements. The tubes favoured combustion reactions, with smaller amounts of partial oxidation and oxidative coupling products observed. Powder coatings have been incorporated to establish the effect of increasing surface area.     

Transfection mediated by gemini surfactants: engineered escape from the endosomal compartment

The structure of the lipoplex formed from DNA and the sugar-based cationic gemini surfactant 1, which exhibits excellent transfection efficiency, has been investigated in the pH range 8.8-3.0 utilizing small-angle X-ray scattering (SAXS) and cryo-electron microscopy (cryo-TEM). Uniquely, three well-defined morphologies of the lipoplex were observed upon gradual acidification: a lamellar phase, a condensed lamellar phase, and an inverted hexagonal (H(II)) columnar phase. Using molecular modeling, we link the observed lipoplex morphologies and physical behavior to specific structural features in the individual surfactant, illuminating key factors in future surfactant design, viz., a spacer of six methylene groups, the presence of two nitrogens that can be protonated in the physiological pH range, two unsaturated alkyl tails, and hydrophilic sugar headgroups. Assuming that the mechanism of transfection by synthetic cationic surfactants involves endocytosis, we contend that the efficacy of gemini surfactant 1 as a gene delivery vehicle can be explained by the unprecedented observation of a pH-induced formation of the inverted hexagonal phase of the lipoplex in the endosomal pH range. This change in morphology leads to destabilization of the endosome through fusion of the lipoplex with the endosomal wall, resulting in release of DNA into the cytoplasm.     

Solid-phase synthesis of a tyrphostin ether library

The solid-phase synthesis of a 4500-member (30 x 15 x 10) tyrphostin library is demonstrated utilizing the Irori-directed sorting system. Fmoc-protected PL-Rink resin was used as the solid support. After Fmoc-deprotection, aryl aldehydes were attached to the resin through reductive amination. Acylation of the resulting secondary amines with cyanoacetic acid was followed by a Knoevenagel condensation with phenolic aldehydes. Mitsunobu coupling of primary alcohols to the resin-bound phenols yielded the final library of compounds 1.     

Differential expression of the skeletal muscle proteome in mdx mice at different ages

The mdx mouse is the most commonly used animal model for Duchenne muscular dystrophy (DMD), a disease caused by the absence of dystrophin. Although much has been done to elucidate the structure and function of dystrophin and the dystrophin-associated glycoprotein complex (DGC), little is known about the cascade of molecular events triggered by the absence of dystrophin that lead to muscle degeneration. To study the molecular basis of DMD, we decided to systematically study the skeletal muscle proteome in mdx mice at different ages. By using two-dimensional (2-D) gel electrophoresis, we defined changes in the protein expression pattern between mdx and control muscles. Approximately 46 differentially expressed proteins from the cytosolic fraction of mdx hindlimb muscles at three months of age were detected by 2-D gel analysis, of which 24 were identified by matrix assisted laser desorption/ionization- mass spectrometry. Most of the proteins fell into five groups of functionally related proteins. These functional categories are (i) metabolism and energy production, (ii) serine protease inhibitor family, (iii) growth and differentiation, (iv) calcium homeostasis, and (v) cytoskeletal reorganization and biogenesis. The potential roles of the differentially expressed proteins are discussed in the context of the mdx phenotype. Finally, we analyzed alterations of protein expression in mdx mice at one and six months of age to determine how protein expression changes with disease progression.     

Ruthenium bipyridyl compounds with two terminal alkynyl ligands

Compounds of the form Ru(X2bipy)(PPh3)2(-C triple bond CC6H4NO2-p)2(X2bipy = 4,4'-X(2)-2,2'-bipyridine, X = Me 3a, Br 3b, I 3c) have been synthesised from the mono-alkynyl precursors Ru(X2bipy)(PPh3)2(-C triple bond CC6H4NO2-p)Cl (X = Me 2a, Br 2b, I 2c); the former are the first ruthenium bis-alkynyl compounds that also contain a bipyridyl ligand. Spectroelectrochemical investigation of 3a shows that the metal is readily oxidised to form the ruthenium(III) compound 3a+, and will also undergo a single-electron reduction at each nitro group to form 3a2-. ESR and UV/visible spectra of these redox congeners are presented. We also report the synthesis of [Ru(Me2bipy)(PPh3)2(-C triple bond CBut)(N triple bond N)][PF6] during the attempted synthesis of Ru(Me2bipy)(PPh3)2(-C triple bond CBut)2, and report its X-ray crystal structure and IR spectrum. X-Ray crystal structures of 3b and 3c(as two different solvates) are presented, and the nature of the intermolecular interactions seen therein is discussed. Z-Scan measurements on Ru(Me2bipy)(PPh3)2(-C triple bond CR)Cl (R = C6H4NO2-p2a, But, Ph, C6H4Me) are also reported, and show that Ru(Me2bipy)(PPh3)2(-C triple bond CR)Cl (R = C6H4NO2-p2a, Ph) exhibit moderate third-order non-linearities.     

Capillary electrochromatography using polyelectrolyte multilayer coatings

This review covers recent progress in polyelectrolyte multilayer (PEM) coatings applied to analytical separations using open-tubular capillary electrochromatography (OT-CEC). The simple preparation procedure involved in the PEM approach has provided some attractive features over other modes of capillary electrophoresis-based separations including packed column capillary electrochromatography (PC-CEC) and micellar electrokinetic chromatography (MEKC). PEM coatings have been used to alleviate the adsorption of basic analytes, to improve separations, and to improve the stability of the electroosmotic flow. Fundamental aspects of PEM coatings on surfaces and analytical separation platforms are briefly outlined in this review. In addition, applications of PEM coatings to fused-silica capillaries or microchip separation devices for the separation of small achiral or chiral analytes, as well as large biomolecules, are discussed.     

Continuous pH monitoring during pretreatment of yellow poplar wood sawdust by pressure cooking in water

Yellow poplar wood sawdust consists of 41% cellulose and 19% hemicellulose. The goal of pressure cooking this material in water is to hydrate the more chemically resistive regions of cellulose in order to enhance enzymatic conversion to glucose. Pretreatment can generate organic acids through acid-catalyzed degradation of monosaccharides formed because of acids released from the biomass material or the inherent acidity of the water at temperatures above 160°C. The resulting acids will further promote the acid-catalyzed degradation of monomers that cause both a reduction in the yield and the formation of fermentation inhibitors such as hydroxymethyl furfural and furfural. A continuous pH-monitoring system was developed to help characterize the trends in pH during pretreatment and to assist in the development of a base (2.0 M KOH) addition profile to help keep the pH within a specified range in order to reduce any catalytic degradation and the formation of any monosac-charide degradation products during pretreatment. The results of this work are discussed.     

Mechanical properties and transition temperatures of crosslinked-oriented gelatin

 This second part of a systematic study of the properties of crosslinked-oriented gelatin involves the effects of orientation and water content on the glass transition temperature T _g and on the melting behavior. The samples were the same as those in the preceding study, and their transition temperatures were determined by both differential scanning calorimetry and dynamic mechanical thermal analysis. The crosslinked gelatin which had been room-conditioned showed two transition temperatures: the lower one was attributed to T _g of the water-plasticized gelatin, and the higher one was interpreted as T _g of dried gelatin superimposed by melting. A rather unusual situation arose because of the fact that the T _g and melting temperatures T _m (217 and 230 ^°C, respectively) are so similar. Using water as plasticizer not only decreases T _g but produces imperfect crystallites which melt below the T _g of the system. The presence of the amorphous phase in the glassy state would presumably make it essentially impossible to define a melting point or crystallization temperature in the normal manner, as an equilibrium between crystalline and amorphous phases. Received: 8 October 1996 Accepted: 2 November 1995