Watching nanoparticles form: an in situ (small-/wide-angle X-ray scattering/total scattering) study of the growth of yttria-stabilised zirconia in supercritical fluids

Understanding nanoparticle-formation reactions requires multi-technique in situ characterisation, since no single characterisation technique provides adequate information. Here, the first combined small-angle X-ray scattering (SAXS)/wide-angle X-ray scattering (WAXS)/total-scattering study of nanoparticle formation is presented. We report on the formation and growth of yttria-stabilised zirconia (YSZ) under the extreme conditions of supercritical methanol for particles with Y(2)O(3) equivalent molar fractions of 0, 4, 8, 12 and 25 %. Simultaneous in situ SAXS and WAXS reveals a quick formation (seconds) of sub-nanometre amorphous material forming larger agglomerates with subsequent slow crystallisation (minutes) into nanocrystallites. The amount of yttria dopant is shown to strongly affect the crystallite size and unit-cell dimensions. At yttria-doping levels larger than 8 %, which is known to be the stoichiometry with maximum ionic conductivity, the strain on the crystal lattice is significantly increased. Time-resolved nanoparticle size distributions are calculated based on whole-powder-pattern modelling of the WAXS data, which reveals that concurrent with increasing average particle sizes, a broadening of the particle-size distributions occur. In situ total scattering provides structural insight into the sub-nanometre amorphous phase prior to crystallite growth, and the data reveal an atomic rearrangement from six-coordinated zirconium atoms in the initial amorphous clusters to eight-coordinated zirconia atoms in stable crystallites. Representative samples prepared ex situ and investigated by transmission electron microscopy confirm a transformation from an amorphous material to crystalline nanoparticles upon increased synthesis duration.     

First examples of neutral rhenium(V) complexes with a novel semi-rigid ligand containing a P,N,N,S donor atom set: Synthesis,characterisation and crystal structure

A new PN₂S ligand, N-[2-(diphenylphosphino)phenyl]-2-[(S-trityl)acetylamino]ethanamide [Ph-P(Ph₂)N₂S(Trt)], was synthesised and reacted with Re^V precursors. The reaction of both tritylated and detritylated ligands with ReOCl₃(PPh₃)₂ gave the same expected neutral complex [ReO{Ph-P(Ph₂)N₂S}] (4) in good yield. An unexpected neutral and diamagnetic species, [ReN{Ph-P(Ph₂)N₂S(Trt)}] (5), has been isolated during the complexation of the tritylated ligand with ReNCl₂(PPh₃)₂. The complexes, characterized by classical spectroscopic methods and X-ray analysis for 4, are the first examples of neutral semi-rigid-PN₂S rhenium(V) complexes.     

Highly Sensitive Magnetic Effects Induced by Hydrogen‐Bonding Interactions in a High‐Spin Metallosupramolecular Fe4II [2×2] Grid‐Type Complex

A sensitive magnetic nanoprobe : Hydrogen‐bonding interactions are reflected with great sensitivity in the ¹H NMR spectra of a high‐spin multinuclear Fe₄^II [2×2] grid‐type complex (see scheme) and the measured shifts can be used to evaluate the hydrogen‐bond donating ability. The grid complex also represents a prototype of a very sensitive magnetic nanoreceptor for the detection of very small changes around a magnetic center.

     

Native polyacrylamide electrophoresis in the presence of Ponceau Red to study oligomeric states of protein complexes

Native polyacrylamide electrophoresis in the presence of two reversible protein anionic stains (Ponceau S and Ponceau 2R) was used to study the oligomeric states of soluble proteins. A mild binding of the used protein stains to nondissociated protein oligomers imposed a charge shift on the proteins resulting into separation of protein species according to their size under physiological conditions. Adsorbed stains could be easily removed after electrophoresis by washing of polyacrylamide gel with buffer and protein complexes could be visualized either by the detection of their enzyme activity or by using a nonspecific protein stain. The specific detection of enzyme activity of glycosidases, lactate dehydrogenase, or phosphatases was shown as an example.     

Convenient synthesis of water-soluble nitrilotriacetic acid (NTA) BODIPY dyes

Mono- and bis-NTA-BODIPY dyes have been efficiently synthesized by amide bond formation between hepta-alkylated meso-aryl-BODIPY derivatives and the free amine of mono- and bis-NTA binder surrogates. These new fluorescent hybrids exhibited valuable photophysical properties under buffered aqueous conditions, thus expanding the arsenal of water-soluble BODIPY dyes for potential labeling and monitoring of biological systems and processes.     

Efficient Synthesis of New 2H‐Chromene Retinoids Hybrid Derivatives by Suzuki Cross‐coupling Reactions

In an attempt to improve anticancer activity, a series of retinoids–chromene hybrids was described. The novel heterocyclic chromene–retinoids hybrid including oxygen as a heteroatom in a six‐membered cyclic ring (2H‐chromene or 2H‐1‐benzopyran) was designed and synthesized by introducing different groups such as an aromatic or styrylphenyl ring in 6‐position of 2H‐chromene. These novel compounds were synthesized by using the efficient cascades one‐pot process involving Wittig–Horner–Emmons reaction and Suzuki–Miyaura cross‐coupling pallado‐catalyzed reactions with 60% to 90% overall yields. These new compounds were tested against glioblastoma multiforme brain cancer, medulloblastoma, neuroblastoma cell lines, and breast cancer MCF‐7 cell lines. Two of them exhibited an appreciable anti‐tumor activity in the low micromolar range, which opens new perspectives for therapeutic application on humans.     

Changes in silicon elastomeric surface properties under stretching induced by three surface treatments

Poly(dimethylsiloxane) (PDMS) substrates are used in many applications where the substrates need to be elongated and various treatments are used to regulate their surface properties. In this article, we compare the effect of three of such treatments, namely, UV irradiation, water plasma, and plasma polymerization, both from a molecular and from a macroscopic point of view. We focus our attention in particular on the behavior of the treated surfaces under mechanical stretching. UV irradiation induces the substitution of methyl groups by hydroxyl and acid groups, water plasma leads to a silicate-like layer, and plasma polymerization causes the formation of an organic thin film with a major content of anhydride and acid groups. Stretching induces cracks on the surface both for silicate-like layers and for plasma polymer thin coatings. This is not the case for the UV irradiated PDMS substrates. We then analyzed the chemical composition of these cracks. In the case of water plasma, the cracks reveal native PDMS. In the case of plasma polymerization, the cracks reveal modified PDMS. The contact angles of plasma polymer and UV treated surfaces vary only very slightly under stretching, whereas large variations are observed for water plasma treatments. The small variation in the contact angle values observed on the plasma polymer thin film under stretching even when cracks appear on the surface are explained by the specific chemistry of the PDMS in the cracks. We find that it is very different from native PDMS and that its structure is somewhere between Si(O2) and Si(O3). This is, to our knowledge, the first study where different surface treatments of PDMS are compared for films under stretching.     

How Carbon Nanotube Crushing can Improve Flame Retardant Behaviour in Polymer Nanocomposites?

Nanocomposites based on an ethylene–vinyl acetate copolymer (27 wt.‐% vinyl acetate) and multiwall carbon nanotubes (MWNTs) have been prepared by melt blending and their thermal degradation and flame retardant properties have been evaluated. Special attention has been paid to the influence of the nanotube nature on the flammability properties and more particularly on the time to ignition (TTI) as measured by cone calorimetry. It has been shown that there is a strong influence of the nature of carbon nanotubes on the fire behaviour of the composites, especially previous MWNTs crushing proved to substantially delay the TTI while maintaining much reduced heat release rate (HRR). Such a remarkable behaviour might be explained by the chemical reactivity of radical species present at the surface/extremities of crushed MWNTs during the combustion process.

     

Exploring the Molecular Structure of Imidazolium–Silica‐Based Nanoparticle Networks by Combining Solid‐State NMR Spectroscopy and First‐Principles Calculations

A DFT‐based molecular model for imidazolium–silica‐based nanoparticle networks (INNs) is presented. The INNs were synthesized and characterized by using small‐angle X‐ray scattering (SAXS), NMR spectroscopy, and theoretical ab initio calculations. ¹¹B and ³¹P HETCOR CP MAS experiments were recorded. Calculated ¹⁹F NMR spectroscopy results, combined with the calculated anion–imidazolium (IM) distances, predicted the IM chain density in the INN, which was also confirmed from thermogravimetric analysis/mass spectrometry results. The presence of water molecules trapped between the nanoparticles is also suggested. First considerations on possible π–π stacking between the IM rings are presented. The predicted electronic properties confirm the photoluminescence emissions in the correct spectral domain.