Axially Dissymmetric Bis(triaryl)phosphines in the Biphenyl series: Synthesis of (6,6′-dimethylbiphenyl-2,2′-diyl)bis(diphenylphosphine) (‘BIPHEMP’) and analogues,and their use in Rh(I)-catalyzed asymmetric isomerizations of N,N-diethylnerylamine

The axially dissymmetric diphosphines (?)-(R)- and (+)-(S)-(6-6′-dimethylbiphenyl-2,2′-diyl)bis(diphenyl-phosphine) ((?)-(R)- 10 and (+)-(S)- 10 ; ‘BIPHEMP’) have been synthesized, starting from (R)- and (S)-6,6′-dimethylbiphenyl-2,2′-diamine ((R)- and(S)- 16 ), respectively, via Sandmeyer reaction, liathiation, and phosphinylation. Moreover, racemic 4,4′- dimethyl- and 4,4′-bis(dimethylamino)-substituted analogues 11 and 12 respectively, and the 6,6′-bridged analogues 1,11-bis(diphenylphosphino)-5,7-dihydrodibenz[c,e]oxepin (13) were synthesized and resolved into optically pure (R)- and(S)-enantiomers via complexation with di-μ-chlorob is {(R)-2-[1-(dimethylamino)ethyl]pheny-C? N}dipalladium(II) ((R)- 18 ). The molecular structures of the diphosphines (S)- 10 and (R)- 13 and of two derived cationic Rh(I) complexes,[Rh((S)- 10 )(nbd)]BF₄ and [Rh((R)- 13 )(nbd)]BF 4 were determined by x-ray analyses. Absolute configurations were established for (+)-(S)- 10 by X-ray analyses of both the free diphosphine and of the derived Rh(I) complex, and for (?)-(R)- 13 by X-ray analysis of the derived Rh(I) complex. Configurational assignments for the substituted BIPHEMP analogues 11 12 were achieved by means of ¹H-NMR comparisons. The BIPHEMP ligand 10 and analogues 11 , 12 and 13 are the first examples of optically active bis(triaylphosphines) containing the axially dissymmetric biphenyl moiety. All these new diphosphines proved to be excellent asymmetry-inducing ligands in Rh(I)-catalyzed isomerizations of N,N-diethylnerylamine affording citronellat enamine of 98-99% ee.     

Optimizing control of simulated moving beds--linear isotherm

A new optimization based adaptive control strategy for simulated moving beds (SMBs) is proposed. A linearized reduced order model, which accounts for the periodic nature of the SMB process, is used for online optimization and control. The manipulated variables are the four inlet flow rates, the outputs are the raffinate and extract concentrations. Concentration measurements at the raffinate and extract outlets are used as the feedback information. The state estimate from the periodic Kalman filter is used for the prediction of the outlet concentrations over a chosen horizon. Predicted outlet concentrations are the basis for the calculation of the optimal input adjustments, which maximize the productivity and minimize the desorbent consumption subject to constraints on product purities. The realization of this concept is discussed and the implementation on a virtual eight column SMB platform is assessed, in the case of binary linear systems. For a whole series of typical plant disturbances it is shown that the proposed approach is effective in minimizing off-spec products and in achieving optimal SMB operation, also in the case where there are significant model uncertainties.     

X-ray spectroscopic characterization of Cu2+-phenanthroline complexes intercalated in α-zirconium phosphate

X-ray photoelectron spectroscopy provides evidence that when [Cu(phen)₂]²⁺(phen = 1,10-phenanthroline) is diffused between the layers of -zirconium phosphate, the complex species does not remain intact after intercalation, but some Cu-N bonds are broken, replaced with Cu-O bonds and the released nitrogen atoms can now interact with the PO₃-OH groups of the host. XPS also provides evidence for coordination of the Cu²⁺ ions when they are diffused by ion exchange in the phenanthroline--zirconium phosphate intercalation compound. Although Cu²⁺ and phen are in a 1 : 1 molar ratio in the interlayer region of the host, so that a 1 : 1 coordination could be expected between the two species, the characteristic peaks of the uncoordinated phenanthroline, even though at a low intensity, are still present. The differences between the two Cu(II)-intercalation compounds are discussed.     

Molecular dynamics in the smectic a and C phases in a long-chain ferroelectric liquid crystal: 2H NMR, dielectric properties, and a theoretical treatment

In this work, the rotational-diffusion coefficients D(parallel) and D(perpendicular) for the ferroelectric smectogen (+)-(S)-4-[4'-(1-methylheptyloxy)] biphenyl 4-(10-undecenyloxy)benzoate have been studied by means of 2H NMR spectroscopy in the smectic C phase, using a new theoretical approach (Domenici,V.; Geppi, M.; Veracini, C. A. Chem. Phys. Lett. 2003, 382, 518). The analysis of spin-lattice relaxation times has been performed in terms of the diffusional constant and the activation energy of the internal and overall molecular-reorientational motions, and the results are compared to the smectic A (SmA) phase. Moreover, from the 2H NMR data in the SmA phase, the dielectric permittivity and the dielectric relaxation time functions are investigated using a theoretical approach. The longitudinal and transverse components of the real Rchigammaomega and imaginary chigammaomega (gamma = parallel, perpendicular) parts of the complex susceptibility tensor and the nematic-like rotational-viscosity coefficients, lambda2 and lambda5, are calculated.     

A quantitative approach to the recycling of alpha-tocopherol by coantioxidants

A systematic investigation is reported on the regeneration of alpha-tocopherol (alpha-TOH) in homogeneous solution by coantioxidants in order to better understand the mechanism and the factors responsible for the effectiveness of this process. The current availability of thermochemical data concerning the reactants involved in the regeneration reactions, as well as a large number of the kinetic constants for the various reactions involved, allowed us to rationalize the experimental observations collected so far. Three limiting cases have been considered. The first case is that of a coantioxidant irreversibly regenerating alpha-TOH, where the effectiveness of the recycling process depends on the magnitude of the rate constant k(r). The second case is that of a coantioxidant reversibly recycling alpha-TOH, where regeneration can only be observed if the bond dissociation enthalpy value of the coantioxidant is lower or at least close to that of the O-H bond of alpha-tocopherol. The third case is that of a catechol derivative (chosen as a model compound for polyphenolic antioxidants), where recycling of alpha-TOH is feasible even though the BDE value is significantly higher than that of vitamin E. In this case, the driving force for the recycling process is the removal of the semiquinone radical from the catechol derivative by the alpha-tocopheroxyl radical, which makes the regeneration of alpha-TOH practically irreversible.     

Selective water sorbents for multiple applications, 3. CaCl2 solution confined in micro- and mesoporous silica gels: Pore size effect on the “solidification-melting” diagram

In this communication we present a low-temperature “solidification-melting” phase diagram for CaCl₂/H₂O solutions confined in KSK and KSM silica gels. At salt concentrations of 0–48 wt. %, the diagram has been found to lie below the diagram reported for the bulk system by 15–30°C. It shows a depression of the solution melting point due to its confinment to the pores. Several other peculiarities of melting and solidification in this system are also reported and discussed. Beside fundamental interest, the data obtained could be of importance in many commercial areas such as refrigeration, accumulation of low temperature heat, frost prevention in building materials,etc.     

Machine learning dielectric screening for the simulation of excited state properties of molecules and materials

Accurate and efficient calculations of absorption spectra of molecules and materials are essential for the understanding and rational design of broad classes of systems. Solving the Bethe–Salpeter equation (BSE) for electron–hole pairs usually yields accurate predictions of absorption spectra, but it is computationally expensive, especially if thermal averages of spectra computed for multiple configurations are required. We present a method based on machine learning to evaluate a key quantity entering the definition of absorption spectra: the dielectric screening. We show that our approach yields a model for the screening that is transferable between multiple configurations sampled during first principles molecular dynamics simulations; hence it leads to a substantial improvement in the efficiency of calculations of finite temperature spectra. We obtained computational gains of one to two orders of magnitude for systems with 50 to 500 atoms, including liquids, solids, nanostructures, and solid/liquid interfaces. Importantly, the models of dielectric screening derived here may be used not only in the solution of the BSE but also in developing functionals for time-dependent density functional theory (TDDFT) calculations of homogeneous and heterogeneous systems. Overall, our work provides a strategy to combine machine learning with electronic structure calculations to accelerate first principles simulations of excited-state properties.

Machine learning can circumvent explicit calculation of dielectric response in first principles methods and accelerate simulations of optical properties of complex materials at finite temperature.     

Bis(dimethylamino)trifluoromethylsulfonium Salze: [CF3S(NMe2)2]+[Me3SiF2]‐, [CF3S(NMe2)2]+[HF2]‐ und [CF3S(NMe2)2]+[CF3S]‐

Bis(dimethylamino)trifluoro sulfonium Salts: [CF₃S(NMe₂)₂]⁺[Me₃SiF₂]^‐, [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ and [CF₃S(NMe₂)₂]⁺[CF₃S]^‐ From the reaction of CF₃SF₃ with an excess of Me₂NSiMe₃ [CF₃(NMe₂)₂]⁺[Me₃SiF₂]^‐ (CF₃‐BAS‐fluoride) ( 5 ), from CF₃SF₃/CF₃SSCF₃ and Me₂NSiMe₃ [CF₃S(NMe₂)₂]⁺‐ [CF₃S]^‐ ( 7 ) are isolated. Thermal decomposition of 5 gives [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ ( 6 ). Reaction pathways are discussed, the structures of 5 ‐ 7 are reported.     

New insight into the oxidative chemistry of noradrenaline: competitive o-quinone cyclisation and chain fission routes leading to an unusual 4-[bis-(1H-5,6-dihydroxyindol-2-yl)methyl]-1,2-dihydroxybenzene derivative

Oxidation of 5×10⁻³ M noradrenaline in aqueous phosphate buffer, pH 7.4, with K₃Fe(CN)₆, NaIO₄ or Fe²⁺/EDTA/H₂O₂ followed by extraction with ethyl acetate and acetylation with Ac₂O/Pyr led to a main reaction product which was isolated and identified as 4-[bis-(1H-5,6-diacetoxyindol-2-yl)methyl]-1,2-diacetoxybenzene, an unprecedented [bis-(indol-2-yl)methyl]-benzene derivative unsubstituted on the 3-position of the indole rings. This product was also obtained in 40% yield by reaction of 5,6-dihydroxyindole with 3,4-dihydroxybenzaldehyde. Other components of the oxidation mixture were 1-acetyl-3,5,6-triacetoxyindole, derived from noradrenolutin, and 5,6-diacetoxyindole, originating from cyclisation/dehydration of the o-quinone of noradrenaline, along with some 3,4-diacetoxybenzaldehyde. Inspection of the aqueous phase revealed the presence of 3,4-dihydroxymandelic acid and 3,4-dihydroxybenzaldehyde, derived from oxidative breakdown of the 2-amino-1-hydroxyethyl chain via a p-quinomethane intermediate. These results disclose new aspects of the oxidative chemistry of noradrenaline beyond the aminochrome stage and provide a route to novel [bis-(indol-2-yl)methyl]-benzene derivatives of potential pharmacological interest.     

Stereoselective synthesis of hyptolide and 6-epi-hyptolide

The first stereoselective syntheses of the naturally occurring, ,β-unsaturated lactone hyptolide 1 and of its nonnatural epimer at C-6 are described. Ethyl l-lactate was the chiral starting material. Key steps of these syntheses were a Brown's asymmetric allylation, a Carreira's asymmetric ethynylation and a ring closing metathesis.