The influence of the brewing process on the formation of biogenic amines in beers

Biogenic amines, as dabsyl derivatives, were determined in beer samples, intermediate products, and raw materials (malt and maize) by HPLC. A procedure for the extraction of the amines from malt and maize with diluted hydrochloric acid was optimised by combining a Response Surface Methodology with a Simultaneous Decision Making Approach. The results of the analysis indicate that, in brewing, technology and hygiene are the decisive factors that determine the amine concentrations in the final product.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Direct quantitation of volatile organic compounds in packaging materials by headspace solid-phase microextraction-gas chromatography-mass spectrometry

The quantification of volatile organic compounds (VOCs) in flexible multilayer packaging materials using headspace solid-phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) was studied. The analytes imclude 22 compounds such as aldehydes. ketones, carboxylic acids and hydrocarbons formed by thermooxidative degradation of polyethylene during the extrusion coating process in the manufacture of the packaging, and many of them are involved in the unpleasant and undesirable odour of these materials. External standard calibration using a solution of the analytes in an appropriate solvent was the first approach studied. Aqueous solutions of the analytes provided low reproducibility and the reduction of aldehydes to alcohols under the HS-SPME conditions. Hexadecane was chosen as the solvent since its polarity is similar to that of polyethylene and its volatility is lower than that of the analytes. However, hexadecane should be added to the sample before the analysis as it modifies the absorption capacity of the fibre. A 75-microm Carboxen-poly(dimethylsiloxane) fibre was used to extract the VOCs from the headspace above the packaging in a 15-ml sealed vial at 100 degrees C after 5 min of preincubation. The influence of the extraction time on the amount extracted was studied for a standard solution of the analytes in hexadecane, together with the influence of the volume of the standard solution and the amount of the sample placed in the vial. Standard addition and multiple HS-SPME were also studied as calibration methods and the results obtained in the quantitative analysis of a packaging material were compared.     

Stereodifferentiation of chiral compounds using reversed-phase liquid chromatography coupled with capillary gas chromatography

A method is described for the enantiomeric quantitation of some chiral compounds via online coupling of reversed-phase liquid chromatography-gas chromatography. The evaluation of some variables affecting the experimentation (i.e., the packing material used in the interface, volume of the transferred fraction, desorption time, initial temperature of the interface, and purge time) makes it possible to optimize the recoveries obtained for some chiral terpenes and lactones using a capillary column of beta-cyclodextrin dissolved in OV-1701. The proposed method allows the enantiomeric analysis of aqueous matrices obtaining relative standard deviations lower than 9% and detection limits ranging from 0.26-0.93 ppm for the investigated compounds.     

Spectroscopic probing of the effect of alkanols on the properties of the head group region in reverse micelles of AOT-heptane-water

The effects of addition of alkanols (ethanol, n-hexanol, and 3-ethyl-3-pentanol) on the micropolarity and microviscosity of the head group region in reverse micelles of AOT-heptane-water have been investigated by fluorescence probing methods (ANS fluorescence yield and TMADPH fluorescence anisotropy), complemented by the use of the solvatochromic probe E(T)(30) in absorption spectroscopy. For all the alkanols considered, ANS fluorescence in AOT reverse micelles (at W=3) is quenched by additive incorporation, being the effect elicited almost independent of the alkanol chain length and topology. As sensed by the E(T)(30) parameter, the micropolarity of the micelle surface increases, remains unmodified, and decreases upon addition of ethanol, 3-ethyl-3-pentanol, and hexanol, respectively. While ethanol barely modifies the fluorescence anisotropy of TMADPH, 3-ethyl-3-pentanol and n-hexanol addition strongly decrease it. The similarity of the tendencies of ANS data to TMADPH anisotropies and the differences between ANS data and E(T)(30) values would indicate that, at least for 3-ethyl-3-pentanol and n-hexanol, microviscosity, rather than micropolarity, must be considered to interpret the effect of the alkanols upon the fluorescent behavior of ANS.     

The scope of catalytic enantioselective tandem carbonyl ylide formation-intramolecular [3 + 2] cycloadditions

Catalytic enantioselective tandem carbonyl ylide formation-intramolecular 1,3-dipolar cycloaddition reactions of 2-diazo-3,6-diketoesters show promising scope in terms of asymmetric induction as the tethered alkene/alkyne dipolarophile component is varied. Cycloadditions were found to occur in moderate to very good yields, with a difference in ee exhibited by the electronically different 2-diazo-3,6-diketoesters 1, 25 and 33, 34. Values for ee of up to 90% for alkene dipolarophiles and up to 86% for alkyne dipolarophiles were obtained.     

Conduction calorimetric studies of ternary binders based on Portland cement, calcium aluminate cement and calcium sulphate

Different binders of Portland cement, calcium aluminate cement and calcium sulphate (PC/CAC/C $ {\bar{\text{S}}} $ ) have been investigated to determinate the influence the CAC and C $ {\bar{\text{S}}} $ amount in the reactions mechanism. Several mixtures were studied, ratios of 100, 85/15 and 75/25 of PC/CAC with 0, 3 and 5 % of C $ {\bar{\text{S}}} $ . Conduction calorimetric technique was used to follow the hydration during 100 h. The XRD and FTIR techniques were used as support in the analysis of the hydration products. The results have shown that the studied ternary systems form an extra amount of ettringite, and changes in the reactions mechanism with respect to a PC. The reactions mechanism depends on the CAC and C $ {\bar{\text{S}}} $ amount present in the different binders.     

Monitoring and Evolution of the Pollution by Volatile Organic Compounds (Vocs) in the Groundwaters of The Najerilla River Basin (Spain)

VOCs were detected and identified in the water of several wells in the area of Nájera (La Rioja). The past uncontrolled spills from an important painting and varnishing industry and from other smaller ones devoted to the manufacture of furniture and varnishing activities were the sources of the VOCs plume detected in this aquifer. This article shows the results obtained in the monitoring and assessment of the pollution at 18 sampling points for more than a year. It has allowed us to study the evolution of the different pollutants and the influence of a remediation process applied by the company in the main pollution source. The analytical method is based on headspace-solid-phase microextraction (SPME) using a 75-μm carboxen-polydimethylsiloxane fibre. Quantification was carried out by gas chromatography with flame ionization detection. This method has allowed us to determine the 13 VOCs identified in the polluted underground samples providing good sensitivity (LOD between 0.1 and 6.0 ng/mL) and reproducibility (r.s.d. less than 10%).     

The Structure of a Non-Symmetric Disordered Tetramer: A Crystallographic and Solid State Multinuclear NMR Study of the Properties of 3(5)-Ethyl-5(3)-Phenyl-1H-Pyrazole

The X-ray structure and the solid-state NMR measurements, mainly ¹⁵N CPMAS of the labelled compound, allow to determine the static and dynamic properties of 3(5)-ethyl-5(3)-phenyl-1H-pyrazole. The compound is a tetramer formed by three 5-ethyl-3-phenyl-1H-pyrazole and one 3-ethyl-5-phenyl-1H-pyrazole tautomers in dynamic equilibrium with the complementary situation.