Perchlorate removal by granular activated carbon coated with cetyltrimethyl ammonium bromide

In this study, granular activated carbon (GAC) coated with cetyltrimethyl ammonium bromide (CTAB) (GAC-CTAB) was synthesized to remove perchlorate from water via adsorption. Laboratory-scale batch experiments were performed to study the factors affecting the perchlorate adsorption by GAC-CTAB, including the CTAB content and solution pH, and explore the mechanisms behind the adsorption phenomenon. The novel GAC-CTAB material was characterized by scanning electron microscopy (SEM), zeta potential measurement and Brunauer-Emmett-Teller (BET) analysis. The characterization tests showed that CTAB was deposited on the GAC surface, pH(pzc) of the material was between 2.0 and 3.0, and the BET specific surface area was reduced from 925 to 729 m(2)/g with the increasing CTAB content from 0 to 0.034 mmol CTAB/g GAC. The adsorption process was better described by a pseudo-second-order kinetics model and the Freundlich adsorption model. The CTAB content and solution pH significantly influenced the kinetics and chemical equilibrium of the adsorption. When the CTAB content was increased from 0.0.023 to 0.135 mmol CTAB/g GAC, the K in the Freundlich adsorption isotherm increased from 0.071 to 0.19 mmol/g. The optimal adsorption typically occurred at pH 2-3, close to the pH(pzc) of the solution. Finally, the mechanisms for the adsorption of perchlorate on GAC-CTAB were associated with surface complexation, electrostatic interaction and ion exchange.     

差压变送器在监测系统中的应用及故障处理

简单介绍了差压变送器的工作原理,设计出一套采集系统,利用北京鼎升力创R8000系列模块和差压传感器的配合来完成对数据的采集。并对R8000系列模块、差压变送器、引压管、变频干扰等在使用过程中的常见故障进行分析,提出解决方法。     

An on-line remote supervisory system for microparticles based on image analysis

A new on-line remote particle analysis system based on image processing has been developed to measure microparticles. The system is composed of particle collector sensor (PCS), particle image sensor (PIS), image remote transmit module and image processing system. Then some details of image processing are discussed. The main advantage of this system is more convenient in particle sample collection and particle image acquisition. The particle size can be obtained using the system with a deviation abot less than 1 mm, and the particle number can be obtained without deviation. The developed system is also convenient and versatile for other analyses of microparticle for academic and industrial application.     

Potential Hydrothermal-Humification of Vegetable Wastes by Steam Explosion and Structural Characteristics of Humified Fractions

In this work, steam explosion (SE) was exploited as a potential hydrothermal-humification process of vegetable wastes to deconstruct their structure and accelerate their decomposition to prepare humified substances. Results indicated that the SE process led to the removal of hemicellulose, re-condensation of lignin, degradation of the cellulosic amorphous region, and the enhancement of thermal stability of broccoli wastes, which provided transformable substrates and a thermal-acidic reaction environment for humification. After SE treatment, total humic substances (HS), humic acids (HA_s), and fulvic acids (FA_s) contents of broccoli samples accounted for up to 198.3 g/kg, 42.3 g/kg, and 166.6 g/kg, and their purification were also facilitated. With the increment of SE severity, structural characteristics of HA_s presented the loss of aliphatic compounds, carbohydrates, and carboxylic acids and the enrichment of aromatic structures and N-containing groups. Lignin substructures were proved to be the predominant aromatic structures and gluconoxylans were the main carbohydrates associated with lignin in HA_s, both of their signals were enhanced by SE. Above results suggested that SE could promote the decomposition of easily biodegradable matters and further polycondensation, aromatization, and nitrogen-fixation reactions during humification, which were conducive to the formation of HA_s.     

风机封闭系统内噪声模拟分析

风机系统工作时的一个突出问题是其进风口和出风口产生的噪声。由于风机流场非常复杂,以及实验成本、实验条件限制,基于计算流体力学（Computational Fluid Dynamics, CFD）的理论逐渐成为风机噪声估计的重要方法。本文拟通过对由风机及其冷却系统构成的封闭系统进行数值建模和仿真,判断出风机主要气动噪声源的位置和种类,为处于封闭系统内的风机的噪声大小预测,提供一个可供参考的信息。结果表明：风机出口腔体内部非定常压力波动强度最大。     

一类具有Markov性质的混沌系统的构造

本文构造了一类具有Markov性质的分段扩张线性映射, 计算表明其具有正的李雅普诺夫指数. 通过理论分析, 证明了其极限分布是均匀分布, 并给出了其最小周期的计算公式. 通过分析符号熵测度应用于此系统时的具体涵义, 指出该系统的复杂度与系统的最小周期之间存在着矛盾关系, 说明了此系统具有可控的复杂度并给出了其复杂度随系统参数变化时的理论极限公式. 通过统计测试和复杂度测试表明, 此系统产生的混沌序列服从均匀分布, 而通过参数的调整该系统的符号熵可以接近其理论极限, 而与Logistic映射和斜帐篷映射的基于近似熵和符号熵的对比实验可知, 本文所提系统具有更高的复杂度, 并有更长的最小周期. 这表明此系统比较适合用于构造保密通信系统. 关键词： 混沌 Markov性质 复杂度 均匀分布     

高压下β-FeOOH纳米固体结构转变的研究

 以化学水解法合成的β-FeOOH纳米微粉（平均粒径在12 nm左右）为原料，分别在0.0~4.5 GPa和200~350 ℃的压力和温度范围进行冷压和热压处理。实验结果表明，冷压对β-FeOOH纳米固体的结构没有明显影响，但却使它的热致相变（从β-FeOOH相到α-Fe₂O₃相）温度从常压下的203.8 ℃提高到4.5 GPa压力下的274 ℃，接近常规体相材料的相变温度。而在一定的热压条件处理下，首次发现了从β-FeOOH相到α-FeOOH相的结构转变，并在4.5 GPa、200 ℃的热压条件下得到了转变过程中的一个新的亚稳相。从压力和温度对纳米微粒的作用角度，对上述实验结果进行了讨论。     

Mg掺杂PST薄膜的溶胶-凝胶法制备及晶相形成研究

利用溶胶-凝胶法成功制备了Mg掺杂Pb_0.4Sr_0.6Mg_xTi< sub>1-xO_3-x薄膜，利用x射线衍射仪对薄膜的物相和结构进行了分析， 用扫描电子显微镜对薄膜的形貌和断面等进行了观察.研究结果表明，薄膜以立方钙钛矿为 晶相，薄膜中晶相以团聚状颗粒存在，晶相含量受热处理条件和Mg的掺杂量所控制.Mg掺杂 对Pb_0.4Sr_0.6Mg_xTi_1-xO_3-x 薄膜晶相含量的影响与钙钛矿中的氧空位缺陷相关.在一定的掺杂范围内，由掺杂引起晶相 的晶格畸变较小时，体系掺Mg平衡了晶体内本征氧空位引入的电荷不平衡，使晶相更为稳定 ，析晶能力提高，晶体形成量随掺杂浓度的提高而提高.当掺杂浓度达到一定量时， 随着Mg 掺杂浓度增加，一方面使形成晶体时杂质浓度增加造成参与形成晶相的组成含量下降，另一 方面使进入钙钛矿结构的Mg增加，氧空位大量增加使畸变程度提高，形成的晶相不稳定，析 晶能力下降，晶体含量随掺杂Mg浓度的增加而不增反降.在相同条件下制备的Pb_{0.4Sr0.6MgxTi1-xO3-x薄膜中Mg掺量约为 x=0.01时，得到的钙钛矿相含量最高，本征氧缺陷所带入的正电荷和Mg引入时带入的负电荷 间达到平衡.此外，Mg的掺入还影响到析晶与热处理过程之间的关系.在高Mg掺量范围，Mg含 量越高，形成的晶相越不稳定，热处理时间越长，使热处理过程中分解的晶相量越多，随Mg 掺量越高和热处理时间越长，薄膜中晶相含量越低. 关键词： 溶胶-凝胶法 PST薄膜 Mg掺杂 晶相形成}     

Existence of solutions for a nonlinear system with a parameter

In this paper, the existence of solutions for a system of nonlinear equations is considered. n² nonzero real solutions are obtained by using the critical point theory. Additionally, the Dirichlet boundary value problems of even order difference equations and partial difference equations are investigated.     

不同压制压力下NiFe2O4纳米固体的ESR研究

 以反滴共沉定法制备了NiFe₂O₄纳米微粉，并在不同压力下将其压制成纳成米固体，然后用XRD谱和ESR谱研究了NiFe₂O₄纳米固体结构和界百状态随压制压力的变化。实验结果表明，NiFe₂O₄纳米固体的结构在高压下没有明显的变化，但其ESR谱的共振线宽和g因子值随着压力升高均表示出先逐渐增大至最大值，然手缓慢下降的规律。这种变化可以归因于纳米固体内部界面离子间的磁相互作用在压力的下所发生和变化。这引起实验结果境示，对于NiFe₂O₄纳米固体而言，最佳的成型压力是4.5 GPa，在此压力下，NiFe₂O₄纳米粒子既可以被压制成致密的纳米固体，又能够保留下它们的纳米结构和纳米性质。