Growth Orientation of the Mechanosynthesized Fluorapatite-Based Composite Nanopowders: Influence of Subsequent Thermal Treatment

Growth orientation of fluorapatite–zirconia nanopowders was investigated after mechanical activation and thermal annealing process in the range of 600–1,300 °C for 1 h. Results revealed that during heating of the composite nanopowders the transition of the monoclinic zirconia to tetragonal form and its stabilization by calcium fluoride originating from the decomposition of fluorapatite as well as the formation of a solid solution of calcium fluoride in zirconia occurred. The influence of annealing on the growth orientation of fluorapatite–zirconia composite nanopowders indicated that the crystal growth of fluorapatite was preferentially accentuated on the (002) face in the direction of the crystallographic c-axis after heat treatment. Based on FE–SEM observations, the experimental outcome was composed of both agglomerates and fine particles (~33 nm) after 600 °C, while annealing of the sample at 1,300 °C demonstrated the occurrence of abnormal grain growth.     

Synthesis of New Aza Macrocyclic Diamides 2,2′‐Diaminodiphenyl Sulfide Using Crab‐Like Method

Six new aza crown ethers (4–9) were synthesized based on the conventional route crab‐like method with the reaction of corresponding bis‐α‐chloroacetamidediphenylsulfide (BCADPS) (3) and aliphathic diamines (a–e) in refluxing acetonitrile in good yields. BCADPS (3) was synthesized with the reaction of 2,2′‐diaminodiphenyl sulfide (2) and chloroacetyl chloride. Interestingly, only the macrocyclization of BCADPS (3) with diamine (e) was led to the cryptand (9) in which methylene hydrogens were found as diastereotopic nucleis which is attributed to the rigidity of the cryptand ( 9 ). The formation of this cryptand ( 9 ) may be related the template effect of potassium ion. The structures of all compounds were confirmed using IR, ¹H‐NMR, ¹³C‐NMR, mass spectroscopies, and elemental analysis.     

SMFs-supported Pd nanocatalysts in selective acetylene hydrogenation:Pore structure-dependent deactivation mechanism

In the present study,CNFs,ZnO and Al2O3 were deposited on the SMFs panels to investigate the deactivation mechanism of Pd-based catalysts in selective acetylene hydrogenation reaction.The examined supports were characterized by SEM,NH3-TPD and N2adsorption-desorption isotherms to indicate their intrinsic characteristics.Furthermore,in order to understand the mechanism of deactivation,the resulted green oil was characterized using FTIR and SIM DIS.FTIR results confirmed the presence of more unsaturated constituents and then,more branched hydrocarbons formed upon the reaction over alumina-supported catalyst in comparison with the ones supported on CNFs and ZnO,which in turn,could block the pores mouths.Besides the limited hydrogen transfer,N2 adsorption-desorption isotherms results supported that the lowest pore diameters of Al2O3/SMFs close to the surface led to fast deactivation,compared with the other catalysts,especially at higher temperatures.     

Gas-phase thermolysis of benzotriazole derivatives. Part 3: Kinetic and mechanistic evidence for biradical intermediates in pyrolysis of aroylbenzotriazoles and related compounds

Gas-phase pyrolysis (static and FVP) of 1-aroylbenzotriazoles gave the corresponding substituted benzoxazole, benzimidazole, benzamide, N-phenylbenzamide, phenanthridin-6(5H)-one derivatives and 1-cyanocyclopentadiene. The present kinetic and mechanistic findings also provide further evidence of the involvement of biradical or carbene reactive intermediates in the reaction pathway of gas-phase pyrolysis of benzotriazoles.     

Regioselective Synthesis of Para‐Bromo Aromatic Compounds

Reaction of substituted benzene rings with N‐bromophthalimide, under neutral conditions, gave the corresponding bromo derivatives with a preference for the formation of the para bromo isomer over the ortho isomer. The simple work‐up procedure minimizes loss of product and the yields are good.     

Kinetic studies on the solvolysis and axial ligand substitutions of bis-triphenylphosphine(cyclohexane-1,2-dione-dioximato)ruthenium(II) in non-aqueous solvents

Kinetic studies of ligand substitutions of the six-coordinated Ru^II pseudo-macrocyclic complex [Ru(CHDH)₂- (PPh₃)₂] (CHDH=cyclohexanedione-dioximato) have been spectrophotometrically investigated in a variety of solvents and at 70, 80, 85 and 90°C. The reactions studied are of the form:[(PPh₃)Ru(CHDH)₂(PPh₃)] + L =[(PPh₃)Ru(CHDH)₂L] + PPH₃ where L is imidazole, pyridine, piperidine or thiophene or a solvent molecule (PhCl, PhMe, MeCN, DMSO or DMF). The solvolysis reactions with chlorobenzene and toluene proceed to an equilibrium position favoring the bis-triphenylphosphine complex. All other reactions proceed to completion. From a mechanistic point of view the reactions were found to proceed through the formation of a five coordinate intermediate that possesses little or no discriminating ability towards the incoming nucleophiles. The rate data were thus interpreted in terms of a dissociative (D) or dissociative interchange (Id) mechanism. Activation parameters H and S are reported. Preliminary studies on the solvatochromic behavior of [Ru(CHDH)₂(PPh₃)₂] and the corresponding mixed complexes are discussed.     

Determination of traces of nitrite and nitrate in water by solid phase spectrophotometry

A simple and sensitive method for the determination of nitrite and nitrate in water using solid phase spectrophotometry is described. The method utilizes the quantitative and rapid sorption of the dye formed from nitrite, using the Griess reaction, into a thin layer of polyurethane foam (PUF) where a preconcentration factor of >140 has been achieved. Nitrate is pre-reduced using a cadmium reductor before applying the Griess reaction. The direct spectrophotometric measurement of the dye enriched in the solid foam phase has allowed the detection of as little as 5 and 40 ng ml⁻¹ nitrite and nitrate, respectively. Optimization of the parameters affecting the quantitative formation and sorption of the dye into PUF has been considered. Analysis of natural water samples has been performed.     

Ultrasensitive Simultaneous Quantification of Nanomolar Level of Cd and Zn by Cathodic Adsorptive Stripping Voltammetry in Some Real Samples

A novel, simple and sensitive adsorptive stripping voltammetry method was developed for simultaneous determination of Cd and Zn using N‐Nitrozo‐N‐phenylhydroxylamine (Cupferron) as a selective complexing agent. Cadmium and zinc metals gave peaks that were distinctly separated by 450–1200 mV, allowing their determination over a wide range of concentrations. The influence of pH and the nature of supporting electrolytes, concentration of ligand, preconcentration time and applied potential were investigated. The detection limits were 0.058 ng/mL for Zn and 0.092 ng/mL for Cd, and the RSD at a concentration level of 50 ppb, were 1.8–2.1 % for both zinc and cadmium, respectively. The method was applied to the determination of cadmium and zinc in blood, drug, food and water samples with the satisfactory results.     

Preconcentration and spectrophotometric determination of low concentrations of malachite green and leuco-malachite green in water samples by high performance solid phase extraction using maghemite nanoparticles

A novel and sensitive extraction procedure using maghemite nanoparticles (γ-Fe₂O₃) modified with sodium dodecyl sulfate (SDS), as an efficient solid phase, was developed for removal, preconcentration and spectrophotometric determination of trace amounts of malachite green (MG) and leuco-malachite green (LMG). Combination of nanoparticle adsorption and easily magnetic separation was used to extraction and desorption of MG and LMG. The adsorption capacity was evaluated using both the Langmuir and Freundlich adsorption isotherm models. Maghemite nanoparticles were prepared by co-precipitation method and their surfaces were modified by SDS. The size and properties of the produced maghemite nanoparticles was determined by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and BET analysis. MG and LMG became adsorbed at pH 3.0. LMG was oxidized to MG by adsorption on maghemite nanoparticles. The adsorbed MG was then desorbed and determined spectrophotometrically. The calibration graph was linear in the range 0.50-250.00 ng mL⁻¹ of MG and LMG with a correlation coefficient of 0.9991. The detection limit of the method for determination of MG was 0.28 ng mL⁻¹ and the relative standard deviation (R.S.D.) for 10.00 and 50.00 ng mL⁻¹ of malachite green was 1.60% (n = 3) and 0.86% (n = 5), respectively. A preconcentration factor of 50 was achieved in this method. The Langmuir adsorption capacity (q_max) was found to be 227.3 mg g⁻¹ of the adsorbent. The method was applied to the determination of MG in fish farming water samples.