A Convenient Synthetic Method of Metal Dendritic Porphyrins

Metal porphyrins are natural antioxidant reagent1-3. However, due to the characteristics of structures, they are only soluble in inorganic acids and part of polar organic solvents. Thus, it is limited to be used as effective pharmaceutical preparations. T…     

全气相化学激光体系的直流放电研究

 为了提高化学激光体系(AGIL)中F原子的产率，采用直流放电引发方式，对棒式电极的放电特性进行了研究。在对NF3/He混合气体进行解离时，通过选择不同平衡电阻，得到了3 kW左右的放电注入功率。用光谱分析仪对F原子产率进行了测量。通过拟合计算可得：一个NF3分子能够解离出1.3～1.5个F原子。     

Fine-line conductor manufacturing using drop-on demand PZT printingtechnology

An emerging selective metallization process to fabricate fine-line conductors based on drop-on-demand (DOD) ink jet printing and novel nano-particle fluid suspensions (NPFS) was studied. The suspensions consist of 1-10 nm silver or gold particulates that are homogeneously suspended in an organic carrier. A piezo-electric droplet generator driven by a bipolar voltage signal is used to dispense 50-70 μm diameter droplets traveling at 1-3 m/s before impacting a compliant polyimide substrate. The deposit/substrate composite is subsequently processed at 300°C for 15 min to allow for complete evaporation of the carrier and for sintering of the nano-particles, thereby yielding a finished circuit interconnect. Test vehicles created using this technique exhibit features as fine as 120 μm wide and 1 μm thick with resistivities on the order of 3.5×10^-5 Ωcm. The circuitry performed well under environmental conditioning. As expected, repeatability of circuitry fabrication showed sensitivity to the generation of steady, satellite-free droplets. In an effort to generate droplets consistently, it is essential to develop a strong fundamental understanding of the correlation between device excitation parameters and dispensed fluid properties, and to resolve the microrheological behavior of the NPFS when flowing through the droplet generator     

AnUV-algorithm for semi-infinite multiobjective programming

In this paper, we give an application ofUV-decomposition method of convex programming to multiobjective programming, and offer a new algorithm for solving semi-infinite multiobjective programming. Finally, the superlinear convergence of the algorithm is proved.     

从模式I2C总线接口电路设计及其VLSI实现

提出了一种从模式的I^2C总线接口电路，该接口电路实现了对可变参数ASIC芯片的配置。该电路的设计使得可配置的ASIC芯片中参数配置所需要的芯片管脚大大减少。该方案已通过行为仿真和综合后门级时序仿真，并且用无锡上华0.6μmCMOS工艺实现。     

统计优化迭代法测量质子交换波导折射率分布

提出了一种用于拟合测量渐变波导的折射率分布的新的理论处理。该方法把统计优化手段导入循环迭代法 ,可适用于费米函数这一类曲线变化范围大、且有多个自变量的函数。实验上用焦磷酸质子交换制备了LiNbO3波导样品 ,用该方法对退火后的折射率分布作了测量拟合 ,折射率拟合值与实验值的均方差为± 8.2× 10 - 4。     

书籍扫描图像畸变参数自动计算方法的研究

为实现书籍扫描图像的畸变自动校正,提出用多项式来描述各像素的理论灰度g(zi)与页面上对应点到扫描仪工作平面距离zi二者之间的关系。为确立该多项式,在畸变参数已知条件下扫描一幅图像,根据已知畸变参数求出zi,即可按最小二乘法原理由各像素灰度的实际值求出多项式的各个系数。实验证明,采用4阶多项式已能满足一般要求,并求出了各系数。对任意扫描图像,自动计算畸变参数的方法为:首先利用扫描图像上页边空白处各像素的灰度,对畸变参数进行估计,并求出zi的估计值;然后代入所确立的多项式,可求得g(zi);通过调整各畸变参数的估计值,直到g(zi)与gi最为接近,即得最佳畸变参数。用于图像校正实验,获得了较好的校正效果,最大误差由不校正时的41%下降到了6.9%。这使得无需用户测量并输入有关畸变参数即可进行自动校正。     

两种以Znq2为基体的新型电致发光材料的合成与性能

以8-羟基喹啉为配体的金属配合物是一种性能优良的有机电致发光材料,其中有关8-羟基喹啉铝(Alq₃)研究已有大量报道,8-羟基喹啉锌(Znq₂)研究还有待发展。介绍了两种以Znq₂为基体的新型有机电致发光材料Znq₂(H₂O)₂和(Znq₂)₄的合成方法。用IR、XRD、TG、DTA和荧光测试方法进行表征与分析表明:Znq₂(H₂O)₂和(Znq₂)₄的玻璃化温度(T_g)分别为104.2℃和204.9℃;在161℃下Znq₂(H₂O)₂脱去水分子成为Znq₂,在361℃高温下四聚体(Znq₂)₄裂解为单体Znq₂;Znq₂(H₂O)₂和(Znq₂)₄具有很好的发光性能,在光致发光谱中λ_max分别是505,550nm。     

Internet网络延时分析

本文对Internet网络延迟进行了较为全面的分析，介绍了几种减少网络延迟的技术。然后提出一种新的方法，并用排队论加以分析。     

Realization of Greenberg-Horne-Zeilinger （GHZ） and W Entangled States with Multiple Superconducting Quantum-Interference Device Qubits in Cavity QED

An alternative scheme is proposed for generating the Greenberg-Horne-Zeilinger （GHZ） and W types of the entangled states with multiple superconducting quantum-interference device （SQUID） qubits in a single-mode microwave cavity field. In this scheme, there is no transfer of quantum information between the SQUIDs and the cavity, the cavity is always in the vacuum and thus the requirement on the quality of cavity is greatly loosened. In addition, during the process of the generation of the W entangled state, the present method does not involve a real excitation of intermediate levels. Thus, decoherence due to energy relaxation of intermediate levels is minimized.