Polystyrene-supported phosphine oxide-catalysed Beckmann rearrangement of ketoximes in 1,1,1,3,3,3-hexafluoro-2-propanol

A polystyrene-supported phosphine oxide-catalysed Beckmann rearrangement of ketoximes in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) has been developed. Good substrate compatibility, mild reaction conditions, good yields as well as the reusability of the catalyst/solvent made this procedure more environmentally benign.     

Direct observation of bulk and surface chemical morphologies of Ginkgo biloba leaves by Fourier transform mid- and near-infrared microspectroscopic imaging

Fourier transform infrared microspectroscopy is a powerful tool to obtain knowledge about the spatial and/or temporal distributions of the chemical compositions of plants for better understanding of their biological properties. However, the chemical morphologies of plant leaves in the plane of the blade are barely studied, because sections in this plane for mid-infrared transmission measurements are difficult to obtain. Besides, native compositions may be changed by chemical reagents used when plant samples are microtomed. To improve methods for direct infrared microspectroscopic imaging of plant leaves in the plane of the blade, the bulk and surface chemical morphologies of nonmicrotomed Ginkgo biloba leaves were characterized by near-infrared transmission and mid-infrared attenuated total reflection microspectroscopic imaging. A new self-modeling curve resolution procedure was proposed to extract the spectral and concentration information of pure compounds. Primary and secondary metabolites of secretory cavities, veins, and mesophylls of Ginkgo biloba leaf blades were analyzed, and the distributions of cuticle, protein, calcium oxalate, cellulose, and ginkgolic acids on the adaxial surface were determined. By the integration of multiple infrared microspectroscopic imaging and chemometrics methods, it is possible to analyze nonmicrotomed leaves and other plant samples directly to understand their native chemical morphologies in detail.

NaY型沸石分子筛催化环己胺氧化制备环己酮肟

考察了系列氧化剂、催化剂和溶剂对环己胺液相氧化制备环己酮肟的影响,发现以乙腈为溶剂,过氧化氢为氧化剂,NaY型沸石分子筛对该反应具有优良的催化性能。 对该反应体系进行了五因素四水平的正交实验,确定了适宜的催化剂用量、溶剂用量、反应时间、反应温度和氧化剂用量,比较分析了各因素对环己胺转化率和环己酮肟选择性的影响。 确定了环己胺液相氧化反应的最佳工艺条件为：环己胺为3 mL,催化剂为03 g,环己胺、溶剂和氧化剂的体积比为1∶3∶3,65 ℃反应2 h。 讨论了环己胺液相催化氧化的反应机理。     

New chiral liquid crystal monomers and cholesteric polyacrylates: synthesis and characterisation

The synthesis of new chiral monomers (M₁ ?M₃ ) based on menthol and the corresponding polyacrylates (P₁ ?P₃ ) is described. The chemical structures, formula and phase behaviour of the obtained monomers and polymers were characterised with FT-IR, ¹H-NMR, elemental analyses, differential scanning calorimetry (DSC), polarising optical microscopy (POM) and X-ray diffraction (XRD). The effect of the mesogenic core rigidity, spacer length and menthyl steric effect on the phase behaviour of M₁ ?M₃ and P₁ ?P₃ is discussed. The expected mesophase of the compounds based on menthol can be obtained by inserting a flexible spacer between the mesogenic core and the terminal groups. For the chiral monomers and polyacrylates, their corresponding melting temperature (T _m), glass transition temperature (T _g) and clearing temperature (T _i) increased with an increase of the mesogenic core rigidity; while the T _m, T _g and T _i decreased with increasing the spacer length. M₁ and P₁ showed no mesophase, while M₂ and M₃ all revealed a SmC* and cholesteric phases. P₂ and P₃ only showed a cholesteric phase.     

分子印迹手性整体柱的制备及对非对映异构体的分离

 采用原位分子印迹技术 ,单步制备了一种辛可宁印迹的手性整体柱。为了提高柱效和选择性 ,选择了相对低极性的甲苯 /十二醇复合致孔体系。在等度及梯度洗脱条件下 ,非对映异构体辛可宁与辛可尼丁被完全分离。等度洗脱中相对较宽的峰可以在梯度洗脱中得到改善。同时考察了流动相中醋酸浓度、流速以及温度对分离的影响。由于柱中存在大的流通孔 ,大大降低了分离过程中的柱压降 ,从而使这种柱能够在相对高的流速下使用。提高温度可以提高分离因子 ,在 60℃获得最大分离因子 5 40。     

等离子体辐照的聚乙烯表面接枝交联共聚合

聚合物利用低温等离子体预辐照进行表面接枝共聚合已有报道.此方法的优点是接枝层被限制在聚合物表面,辐照过程对基材本体性质无影响,且整个过程对环境无污染. 用等离子体使聚合物表面产生自由基,不需要表面具有不饱和键或特殊官能团,因而适用于任何聚合物,甚至于一些无机物如玻璃等.利用等离子辐照后暴露于空气的聚合物表面上生成的过氧自由基或过氧化物进行接枝反应,一般接枝量不大.本工作中,我们自己设计了反应器,以超高分子量聚乙烯(UHMWPE)为基材,以甲基丙烯酸甲酯(MMA)为接枝单体,在无氧条件下利用等离子体辐照产生的表面自由基进行了接枝聚合,产物接枝量高达10％.还用顺磁共振技术对表面自由基性质及其在接枝过程中的行为进行了跟踪研究.     

四氟乙烯与异丙醇的调节聚合研究

采用气相色谱法,研究了反应温度、引发剂浓度、四氟乙烯单体压力对四氟乙烯与异丙醇调聚反应产物重量分布的影响。实验结果表明,随温度升高,n=1的产物含量增加,n>1的各产物含量下降;单体压力的影响则相反;引发剂浓度的影响不明显。反应初期n=1产物生成速率较快,反应中、后期有利于m≥3产物的生成。     

离子液体修饰对Cu/USY催化乙炔氢氯化反应性能的影响

为了提高Cu/USY催化剂在乙炔氢氯化反应中的催化活性,设计并成功制备了一系列离子液体修饰的分子筛负载的铜基催化剂(Cu@TPPB/USY).当铜和TPPB的百分含量均为15时,在反应温度为160℃,乙炔气体空速为120 h-1,氯化氢与乙炔的摩尔比为1.25:1的条件下,催化剂的乙炔转化率提升了1.17倍,氯乙烯选择性一直保持在98%以上.结合催化剂的傅里叶红外(FT-IR)、 N2物理吸脱附(BET)、热重分析(TG)、 X射线光电子能谱(XPS)、透射电镜(TEM)、 X射线衍射(XRD)、氢气程序升温还原(H2-TPR)和等离子体发射光谱(ICP-OES)的表征,认为TPPB的修饰不仅可以促进催化剂中Cu物种的分散,抑制其还原和流失,还能减少催化剂表面积碳、增强Cu活性物种与载体间的相互作用力,有效地提高Cu/USY催化剂的催化活性.     

Supercritical CO2-induced New Chemical Bond of C−O−Si in Graphdiyne to Achieve Robust Room-Temperature Ferromagnetism

The realization of ferromagnetic ordering of two-dimensional (2D) carbon material graphdiyne (GDY) has attracted great attention due to its promising application in spin semiconductor devices. However, the absence of localized spins makes the pristine GDY intrinsically nonferromagnetic. Herein, we report the realization of robust room-temperature (RT) ferromagnetism (FM) with Curie temperature (T_C) up to 325 K for GDY Nanosheets (GDYNs) by supercritical CO₂ (SC CO₂). Experimental and theoretical calculations reveal that the new chemical bond of C−O−Si can be formed because of the unique effect of SC CO₂, which help to enhance the charge transfer and generates long-range ferromagnetic order. The RT saturation magnetization (M_S) reaches 1.125 emu/g, which is much higher than that of carbon-based materials reported up to now. Meanwhile, by changing the conditions of SC CO₂ such as pressure, ferromagnetic responses can be manipulated, which is great for potential spintronics applications of GDY.     

Recent advances in electrochemical sensors for antibiotics and their applications

The abuse of antibiotics will cause an increase of drug-resistant strains and environmental pollution,which in turn will affect human health.Therefore,it is important to develop effective detection techniques to determine the level of antibiotics contamination in various fields.Compared with traditional detection methods,electrochemical sensors have received extensive attention due to their advantages such as high sensitivity,low detection limit,and good selectivity.In this mini review,we summarized the latest developments and new trends in electrochemical sensors for antibiotics.Here,modification methods and materials of electrode are discussed.We also pay more attention to the practical applications of antibiotics electrochemical sensors in different fields.In addition,the existing problems and the future challenges ahead have been proposed.We hope that this review can provide new ideas for the development of electrochemical sensors for antibiotics in the future.