胺类化合物气相色谱保留指数与结构的相关性研究

应用Ａｍ指数和引力指数Ｇ１对在３种体系下的胺类化合物的气相色谱保留指数和结构进行了相关性研究,并运用最佳子变量集算法和人工神经网法进行了计算分析,在非极性固定相ＯＶ－１０１和极性固定相ＯＶ－２２５和ＮＧＡ下均获得了比较好的相关模型。     

One-Pot Formation of Carbonates from the Reactions of Carbonyl Compounds with Samarium Diiodide and Methyl Chloroformate

Treatment of carbonyl compounds with SmI₂ and methyl chloroformate in the presence of molecular sieves provides the cyclic carbonates or biscarbonates of pinacols. This one-pot reaction proceeds rapidly even with aliphatic ketones. The stereochemistry obtained by this procedure is different from that of conventional pinacolic couplings.     

Simple and controllable synthesis of highly dispersed Pt-Ru/C catalysts by a two-step spray pyrolysis process

A carbon supported Pt-Ru catalyst with uniform distribution and small average size of the Pt-Ru particles was synthesized using a two-step spray pyrolysis (SP) method; the electrocatalytic activity of the prepared catalyst for methanol oxidation is better than that of the standard commercial catalyst.     

一种新型双亚胺吡啶铁系催化剂的乙烯低聚研究

线性α 烯烃广泛地应用于洗涤剂、增塑剂、润滑油等精细化学品的合成以及作为共单体制备线性低密度聚乙烯 (ＬＬＤＰＥ) .目前工业上主要是应用ＳＨＯＰ法[1] 、Ｃｈｅｖｒｏｎ工艺和Ａｍｏｃｏ工艺[2 ] 通过乙烯低聚制备 .近些年发展起来的新型高活性后过渡金属乙烯低聚催化剂能够高选择性地制备线性α 烯烃[3 ,4] .Ｂｒｏｏｋｈａｒｔ等[4] 的研究表明 ,对于双亚胺吡啶铁系乙烯聚合催化剂而言 ,配体上苯基的邻位取代基位阻减小可以实现乙烯低聚 ,并具有高活性、高选择性以及理想的低聚产物分布 .本文的工作是从配体的空间位阻效应对催化剂…     

Correct identification of polychlorinated biphenyls in temperature-programmed GC with ECD detection

A method has been developed for peak identification of PCBs in GC with ECD detection under different temperature programs and isothermal conditions on two commonly used columns (DB-5 and DB-1701). This was achieved by means of accurate calibration of retention times based on the concept of the relative retention index P (i) and retention times of the selected PCB internal standards. The P (i) was calculated from the predicted retention times with the database of the retention parameters (A, B) and the migration equations. Through comparison of the calibrated and experimental retention times of PCBs in technical samples, it was shown that the developed method was effective for correct PCB comprehensive, quantitative, congener-specific (CQCS) analyses.     

Cr（Ⅲ）—5—Br—PADAP—Triton X—100析相光度法测定微量铬的研究

研究Cr(Ⅲ)-5-Br-PADAP-Triton X-100析相显色体系,建立测定微量铬的析相光度法。在pH 4.5乙酸-乙酸钠介质中,Cr(Ⅲ)、5-Br-PADAP、Triton X-100加热形成的配合物,于95℃恒温浴中析相1h,即被Triton X-100相完全富集,最大吸收峰为593nm,铬含量在0～10μg/5ml服从比耳定律,以硫脲、锰-EDTA、柠檬酸钠、氟化钾为掩蔽剂,测定水样中微量铬,获得满意结果。     

Crystal Structure of (3S, 6S, 7R, 8R)-3,6-Bis-diphenylphosphino-1,4-dioxabicyclo〔3.3.0〕octane

1INTRoDUCTIONThetitlecompoundhasbeenfoundtobeaveryefficientchiralligandusedtoco-ordinatewithpalladiumformingcatalystsystemsforasymmetrichydroesterificationofnorborneneandstyrene.Intheseasymmetriccatalyticreactions,thechiralinduc-tionofthetitlecompoundisratherstronggivingveryhighoptica1yields(>9o%)ofproductstl3.Inordertostudytherelationshipoftheperformanceandthestructureofthisligand,itisimportanttodeterminethemolecularstructureofthechiraldiphos-phinecompound,whichwaspreparedbytheliteraturem…     

对甲苯磺酰谷氨酸桥联的一维双链锰配合物的合成、表征与晶体结构

A one-dimensional double-chain coordination polymer [Mn(phen)(tsgluo)] was synthesized in a mixed solution and its crystal structure was determined by X-ray diffraction method. It crystallizes in orthorhombic system with space group P2₁2₁2₁. The crystal data are: a=0.530 78(17) nm, b=1.723 9(5) nm, c=2.456 9(8) nm, Z=4, μ=0.729 mm^-1, D_c=1.579 g·cm^-3, V=2.248 1(12) nm³, R₁=0.033 1, ωR₂=0.078 9. In the title complex, each Mn(Ⅱ) ion presents a octahedral geometry with the coordination of two nitrogen atoms from 1,10-phenanthroline and four oxygen atoms from three different tsgluo^2- ligands. The γ-carboxyl coordinates to Mn(Ⅱ) in the mode of bidentate chelate, while the α-carboxyl coordinates in a bidentate bridging mode. CCDC: 253910.     

晶态氮化碳薄膜的低温合成

The synthesis of carbon nitride films at low temperature has been investigated using pulsed arc discharge from methanol solution with nitrogen atmosphere. Raman spectra and X-ray diffraction (XRD) analysis suggest that crystalline carbon nitride films may be prepared at low substrate temperature (220 ℃). At same time, the substrate temperature has a significantly effect on the nitrogen content and structure of the films. Increasing substrate temperature (300 ℃) would decrease the content of nitrogen in the films and result in a formation of carbon films.     

亲水性交联聚合物载体的合成表征及其固定化α-淀粉酶

选用丙烯酰胺(AM)、N-羟基琥珀酰亚胺为单体(NHS),以N,N/-亚甲基双丙烯酰胺(MBAA)为交联剂,以乙醇水溶液为制孔剂条件下进行反相悬浮聚合,得到珠状共聚物载体,该载体是一种新的酶载体形式,在国内外的相关文献中均未见报道.用红外光谱、扫描电子显微镜测定其结构和表观活性.结果表明,在固定单体配比[W(AM)/W(NHS)=10∶1]和致孔剂用量的情况下,测得交联剂用量为4%时,交联聚合物载体的溶胀性最好(287.5%);交联剂用量为5%时,交联聚合物载体固定化α-淀粉酶表现出高的表观活性(522.53U/g).测得固定化酶载体表现出良好的操作稳定性.比较固定化酶和游离态酶的最适反应温度发现,固定化酶的最适反应温度(70℃)比游离态酶高20℃;固定化酶的最适反应pH值范围较游离态酶广.