Linear crosstalk in 4×4 semiconductor optical amplifier gateswitch matrix

We report a comprehensive crosstalk investigation of a packaged InGaAsP/InP 4×4 semiconductor optical amplifier gate switch matrix, experimentally as well as theoretically. For a fully loaded switch with the same wavelength on all four inputs, all possible switching combinations are analyzed, thus yielding realistic crosstalk figures. Coherent and incoherent crosstalk phenomena are identified, and a switch crosstalk less than -40 dB has been measured     

Modulation characteristic of waveguide-type optical frequency combgenerator

We report the modulation characteristics of a waveguide-type optical frequency comb generator (WG-OFCG) with the advantages of compactness, high modulation index and low driving power. The characteristics of the optical frequency comb (OFC) generated when the modulation index exceeds 2π are discussed. The power of the modulation sidebands was measured by the optical heterodyne method with an external-cavity laser as a local oscillator. The dependence of the modulation index of the WG-OFCG on the modulation frequency up to 40 GHz was measured. The generation span of the OFC at the modulation frequency detuned from an integer multiple of the free spectral range (FSR) is discussed     

A new erasing method for a single-voltage long-endurance flashmemory

A new method to erase a standard (double-poly, stacked-gate NOR-type) flash cell is proposed. The method, still using the tunneling mechanism to extract electrons from the floating gate, is based on the concept of keeping the electric field constant during the whole erasing operation. The new method has two main advantages with respect to the conventional one: (1) it does not depend on the supply voltage variation and (2) it allows a better reliability in terms of endurance-induced stress. Results have shown that flash device performances are greatly improved in terms of stability and endurance reliability up to one million cycles     

Communication network protocol for real-time distributed controland its LSI implementation

A new token-passing mechanism, priority token passing, which features real-time access and fast detection and recovery of transmission errors, is discussed in detail in comparison with standard token-passing protocols, and its large-scale integration (LSI)-oriented design concept is described. Priority token passing includes only a small performance overhead, due to its switching functions, which can change network topology from ring to broadcast medium. A token-holding node passes the token to another node after determining the successor through priority comparison. Errors occurring during token passing can, thus, be detected and corrected simply and promptly. Priority token passing has a simple hardware implementation, requiring only small additions to the frame control circuitry, and has a small implementation overhead. The priority token-passing protocol and two other important network communication functions, dual ring network reconfiguration and high-level data link control (HDLC) normal response mode-based message transmission, are designed as a single finite-state machine, and implemented into a compact LSI chip. This integrated instrument network (IINET) chip provides complete network communication services and requires only three additional external electronic components for operation     

A novel method for elimination of line-current harmonics insingle-stage PFC switching regulators

This paper studies a particular single-stage power-factor-correction (PFC) switching regulator employing a discontinuous-conduction-mode (DCM) boost-input cell and a continuous-current-mode (CCM) forward output cell. Although this single-stage PFC regulator can provide a reasonably high power factor when its PFC stage is operating in discontinuous mode, substantial reduction in line-current harmonics is possible by applying a suitable frequency-modulation scheme. This paper derives a frequency-modulation scheme and proposes a practical implementation using a simple translinear analog circuit. A quantitative analysis on the total harmonic distortion (THD) of the line current when the circuit is subject to a limited range of frequency variations is presented along with some considerations for practical design. Experimental data obtained from a prototype confirms the effectiveness of the proposed frequency-modulation scheme. The proposed analog translinear circuit allows custom integrated circuit implementation, making it a viable low-cost solution to the elimination of line-current harmonics in switching regulators     

Simplified 0.35-μm flash EEPROM process using high-temperatureoxide (HTO) deposited by LPCVD as interpoly dielectrics and peripheraltransistors gate oxide

A simplified flash EEPROM process was developed using high-temperature LPCVD oxide both as flash cells interpoly dielectrics and as peripheral transistors gate oxide (decoding logic). An O₂ anneal at 850°C lowers charge trapping and interface trap density induced by Fowler-Nordheim injection. However, electron trapping remains slightly higher than with dry thermal oxide. Similar memory charge loss and write-erase endurance are obtained as for ONO-insulated cells. HTO thus proves to have the required quality and reliability to be used in flash EEPROMs     

Selective quenching of tryptophanyl fluorescence in bovine serum albumin by the iodide ion

Modified Stern-Volmer equation is obeyed by bovine serum albumin (BSA)-iodide system showing selective quenching of tryptophanyl fluorescence of BSA. The fraction of accessible protein fluorescence is 0.56 and the effective Stern-Volmer constant is 290 M^-1 at pH 7.4 in 0.005 M phosphate buffer at 25°C. Collisional quenching is operative both in the BSA -I⁻¹ system and the model system, tryptophan-I⁻¹. It is supported by the observed relationship between the ratio of quenching rate constants (k _q ) and diffusion coefficients and alsok _q with bulk viscosity.     

Performance of the PAC optical packet network

For multiuser packet communications with unpredictable user demands (e.g., in a local or metropolitan area network), coordination and control of access to the frequency-division multiplexing (FDM) channels are difficult. B. Glance (J. Lightwave Technol., vol.10, pp.1323-1328, Sep 1992) proposed using a simple protection-against-collision (PAC) circuit to solve this media access problem and achieve full optical connectivity. The PAC system has the potential to interconnect hundreds of ports, each transmitting at several gigabits per second. Performance aspects of the PAC optical packet network are discussed here. The delay-throughout performance of this network is analyzed for uniform traffic patterns. The results show that in geographically distributed applications the maximum achievable throughput (normalized to the transmission rate) is typically between 0.4 and 0.5 per channel. In a centralized switch the (normalized) maximum achievable throughput can approach 0.8 per channel