Suppression control method for torque vibration of three-phase HB-type stepping motor utilizing feedforward control

This paper proposes a method to reduce the vibration of the three-phase HB-type stepping motor with cogging torque by the feedforward compensation control. The compensation signal to suppress the vibration of the motor frame is obtained by the repetitive controller installing an online Fourier transformer and utilizing an acceleration sensor attached to the motor frame or an acoustic sensor such as a microphone placed close to the frame. The sensor is used only for the acquisition of the feedforward compensation data. The feedforward compensation signal at an arbitrary operating point is derived from the amplitude and phase data of the frequency components and the operating point data. Compensation data obtained by the repetitive controller is applied to the operating point changed by reference frequency and load condition in steady state. The compensation signal for the new operating point will be generated from compensation data utilizing polynomial equation approximation and linear interpolation method. The effectiveness of this proposed method is confirmed by the experimental results.     

An expert aid to fault diagnosis and trouble-shooting in satellitecommunications

Presents the Satellite Communications Network Expert (SaNE), a knowledge-based aid designed to provide engineering support for fault diagnosis. The SaNE is composed of two elements: a satcom network model, which simulates the structure and functionality of a system based loosely upon a large military satcom network, and a diagnostic component, which uses knowledge- and model-based reasoning techniques to analyse system anomalies and diagnose possible causes for the alarms such networks generate. The development cycle is described, emphasising lessons learnt during development and testing and the advantages and disadvantages of the techniques applied. The goal of the SaNE project is primarily commercial acceptance rather than innovation. The authors illustrate how novel concepts can be implemented in a practical system without compromising this goal     

Very low threshold graded-indexseparate-confinement-heterostructure strained InGaAsPsingle-quantum-well lasers

A low threshold current density of ~100 A/cm² has been obtained at 1.55 μm using a graded-index separate-confinement-heterostructure strained InGaAsP single-quantum-well laser. The design of the laser structure is based on results calculated from the viewpoint of effective carrier injection into the well     

The structure and management of service level agreements innetworks

The paper proposes a structure for quality-of-service (QoS)-centered service level agreements (SLA), and a framework for their real-time management in multiservice packet networks. The SLA is structured to be fair to both parties, the service provider and their customer. The SLA considered here are for QoS assured delivery of aggregate bandwidth from ingress to egress nodes; however, the control and signaling is for the more granular flows or calls. A SLA monitoring scheme is presented in which revenue is generated by the admission of flows into the network, and penalty incurred when flows are lost in periods when the service provider is not SLA compliant. In the SLA management scheme proposed, the results of a prior off-line design are used, in conjunction with measurements taken locally at ingress nodes, to classify the loading status of routes. The routing and resource management are based on virtual partitioning and its supporting mechanism of bandwidth protection. The effectiveness of SLA management is measured by the robustness in performance in the presence of substantial diversity in actual traffic conditions. A simulation testbed called D'ARTAGNAN has been built from which we report numerical results for a case study. The results show that the SLA management scheme is robust, fair and efficient over a broad range of traffic conditions     

Design and performance evaluation of a banyan network basedinterconnection structure for ATM switches

This paper presents a new self-routing packet network called the plane interconnected parallel network (PIPN). In the proposed design, the traffic arriving at the network is shaped and routed through two banyan network based interconnected planes. The interconnections between the planes distribute the incoming load more homogeneously over the network. The throughput of the network under uniform and heterogeneous traffic requirements is studied analytically and by simulation. The results are compared with the results of the baseline network and another banyan network based parallel interconnection network. It is shown that, for the proposed design, a higher degree of heterogeneity results in better performance     

Asymmetric dilation of multiwavelength cross-connect switches forlow-crosstalk WDM optical networks

We predict that, for wavelength division multiplexing optical-network applications, an asymmetrically dilated configuration of a 2×2 cross-connect is significantly better in terms of overall crosstalk when the levels of the bar-port crosstalk and the cross-port crosstalk are significantly different from each other, as is the case with optical-frequency filters which utilize grating-assisted coupling. As a verification, we present a simulation study with 2×2 polarization-diversified acousto-optic tunable filters. We present a recursive method to extend the principle of asymmetric dilation to larger-size cross-connect switches, and make a recommendation for an asymmetrically dilated 4×4 cross-connect configuration     

Optimal deterministic timeouts for reliable scalable multicast

Reliable multicast protocols suffer from the problem of feedback implosion. To avoid this problem, the number of receivers sending feedback in case of loss must be small. However, losses experienced by different receivers are strongly correlated, since receivers share common resources in the multicast tree. One approach to feedback implosion avoidance relies on delaying feedback at the receivers. We present deterministic timeouts for reliable multicast (DTRM), a distributed algorithm to compute optimal deterministic timeouts for each receiver in a multicast tree as a function of the tree topology and the sender-to-receiver round-trip delays. DTRM has several desirable properties. First, feedback implosion is provably avoided for a single loss anywhere in the tree, provided delay jitter is bounded. Second, the computation of the timeouts can be entirely distributed; receivers and intermediate nodes only rely on local topology information. Third, the timeouts computed by DTRM are optimal with respect to the maximum response time     

Finite element beam propagation method for three-dimensionaloptical waveguide structures

A beam propagation method (BPM) based on the finite element method (FEM) is described for longitudinally varying three-dimensional (3-D) optical waveguides. In order to avoid nonphysical reflections from the computational window edges, the transparent boundary condition is introduced. The present algorithm using the Pade approximation is, to our knowledge, the first wide-angle finite element beam propagation method for 3-D waveguide structures. To show the validity and usefulness of this approach, numerical results are shown for Gaussian-beam excitation of a straight rib waveguide and guided-mode propagation in a Y-branching rib waveguide     

Positive temperature dependence of the electron impact ionizationcoefficient in In0.53Ga0.47As/InP HBTs

Impact ionization is a major limiting factor to the maximum operating voltage of InGaAs-based, high-speed transistors. In this work, data on the positive temperature dependence of the electron impact ionization coefficient α_n in In_0.53Ga_0.47As at medium-low electric fields are reported for the first time. The increase of α_n with temperature is opposite to the behavior normally observed in most semiconductors. This anomalous behavior implies the onset of a positive feedback between power dissipation and avalanche generation which may adversely affect the power handling capability of In_0.53Ga _0.47As-based devices, and which should be taken into account in device thermal modeling. In the experimental procedure, based on the measurement of the multiplication factor M-1 in npn In_0.53Ga _0.47As/InP Heterojunction Bipolar Transistors (HBT), particular care has been taken in order to rule out possible spurious, temperature-dependent contributions to the measured multiplication current