High-speed InGaP/GaAs HBTs with a strained InxGa1-xAs base

A self-aligned InGaP/GaAs heterojunction bipolar transistor with a compositionally graded In_xGa_1-xAs base has been demonstrated with f_T=83 GHz and f_max=197 GHz. To our knowledge, these results are the highest reported for both parameters in InGaP/GaAs HBT's. The graded base, which improves electron transport through the base, results in a DC current gain and a cutoff frequency which are 100% and 20% higher, respectively, than that achieved by an identical device with a nongraded base. The high f_max results from a heavily doped base, self-aligned base contacts, and a self-aligned collector etch. These results demonstrate the applicability of InGaP/GaAs HBT's in high-speed microwave applications     

A 10 bit 20 MS/s 3 V supply CMOS A/D converter

A 10 bit CMOS A/D converter with 3 V power supply has been developed for being integrated into system VLSI's. In this A/D converter, redundant binary encoders named “twin encoders” enhance tolerance to substrate noise, together with employing differential amplifiers in comparators. The bias circuit using a replica of the amplifier is developed for biasing differential comparators with 3 V power supply. Subranging architecture along with a multilevel tree decoding structure improves dynamic performance of the ADC at 3 V power supply. The A/D converter is fabricated in double-polysilicon, double-metal, 0.8 μm CMOS technology. The experimental results show that the ADC operates at 20 MS/s and the twin encoders suppress the influence of substrate noise effectively. This ADC has a single power supply of 3 V, and dissipates 135 mW at 20 MS/s operation     

Organometallic complexes in ascidian embryonic development: II. Effects on different stages and larvae

The effects of the organometallic compounds Bu₂Sn-D -(?;)sorbitol, Bu₂Sn-D -(+)glucose, Bu₂Sn-D -(?)fructose and Bu₂Sn-D -(+)glyceraldehyde were tested in vivo on different stages of Ascidian development, larval movement and metamorphosis. Organotin(IV) complexes are organometallic compounds widely used as industrial biocides, antifouling agents and agricultural fungicides and are toxic to a range of organisms. Two-cell stage embryos, if incubated for one hour in the organotin (IV) solutions, stopped the cleavage, which was restored when they were transferred into normal sea water. The gastrula stage was seriously affected in 10^?4mol dm^?3 solutions of the above-mentioned complexes: 85% of the embryos were anomalous neurulae with open neural folds, 5% were twisted larvae. The gastrulae, when incubated for 1 h in 10^?5mol dm^?3 solutions, developed twisted larvae in ovular envelopes and immobile larvae with twisted tails. Larvae treated with 10^?4mol dm^?3 and 10^?5 mol dm^?3 Bu₂Sn-D -(?)sorbitol, Bu₂Sn-D -(+)glucose and Bu₂Sn-D -(+)glyceraldehyde solutions stopped swimming, did not metamorphose and afterwards underwent cytolysis. An initial hyperactivity of circular movements, followed by immobility, was observed in the larvae incubated in Bu₂Sn-D -(?;)fructose.     

Capacitor coupled converter (C3) for high power DCconversion

The bang-bang controlled capacitor coupled converter (C³) is described in this paper. Due to the converter's inherent commutating property, the C³ can accommodate thyristors as well as high-power gate turn-off switches, due to zero-current switching transitions. The zero-current switching is achieved at no current stress increase, therefore, the topology is considered appropriate for high-power processing. DC and small signal AC models are derived for the bang-bang controlled C³, a design procedure is proposed, and simulation results are discussed. Finally, oscillograms from a proof of principle prototype circuit are presented     

Cellulose-polyamide 66 blends. Part II: Mechanical behavior

Blends of the natural polymer cellulose with a synthetic polymer, polyamide 66, are studied in order to determine if the expected strong interaction between them, due to hydrogen bonds, could improve their mechanical properties such as strength and elongation at break. In a previous work {Part I, J. Polym. Sci. Polym. Phys., 32 , 1437 (1994)}, the preparation technique and the characterization of cellulose-polyamide 66 (PA66) blends were described in detail. Several samples in the composition range between 0 to 70 wt % of PA66 were carefully dried and examined using dynamic mechanical and tensile tests. Based on previous work a new percolation model has been developed. It takes both linear and nonlinear mechanical behaviors into account and allows for the effect of adhesion between material domains. From comparison between experimental and predicted data, it is concluded that a partial miscibility between the amorphous phases of cellulose and PA66 exists and is responsible for a strong adhesion at their interface. Solid-state ¹³C nuclear magnetic resonance has also been used to study these samples and supports the existence of strong interactions between both homopolymers. © 1995 John Wiley & Sons, Inc.     

Origin of satellite structures of high field epr in Cd1−xMnxTe

The electron paramagnetic resonance (EPR) of Mn²⁺ in Cd_1?x Mn _x Te was examined at low temperatures and high magnetic fields with the Mn concentration ranging fromx=0.01 tox=0.65. A far infrared laser was used as a radiation source. The structure of the resonance is strongly influenced by electromagnetic propagation effects. By variation of the sample thickness it was clearly shown that the satellite structures besides the main EPR peak, formerly explained as originating from transitions in the Mn²⁺ pair energy level scheme, are solely due to interference effects.     

Evaluation of atomic fluorescence, absorption and emission techniques for the determination of mercury

Summary Atomic fluorescence (AFS), absorption (AAS) and emission (AES) systems were evaluated for the determination of inorganic mercury. Identical vapour generation and amalgamation procedures were used to permit direct comparison of the performance of a commercial long-path AAS instrument to laboratory constructed non-dispersive AFS as well as He-MIP based AES instruments. Instrumental noise-limited detection limits (LOD) were 0.94, 2.4, 2.8 pg for AAS, AES and AFS techniques, respectively. Methodological LOD's were found to be blank controlled and similar for all three instruments, viz. 9, 25 and 16 pg for AAS, AFS and AES, respectively. All three systems produced accurate results at the low ng/l concentration, as verified by the analysis of a certified river water reference material (NRCC ORMS-1).