On finite element approximation and stabilization methods for compressible viscous flows

This work is devoted to the numerical solution of the Navier–Stokes equations for compressible viscous fluids. Finite element approximations and stabilization techniques are addressed. We present methods to implement discontinuous approximations for the pressure and the density. An upwinding methodology is being investigated which combines the ideas behind the stream line Petrov–Galerkin method and the flux limiter methods aiming to introduce numerical diffusion only where it is necessary.     

Transmit permission control on spread ALOHA packets in LEOsatellite systems

A transmit permission control method for improving the throughput characteristics of a low Earth orbit (LEO) satellite communication system employing spread-slotted ALOHA multiple-access scheme is proposed. Both nonfading and fading satellite links are considered. The basic idea of the proposed scheme is to decrease the level of interference at each satellite and, hence, to increase the probability of packet success, by prohibiting the packet transmission from the users with relatively high propagation loss to their connecting satellites. It is shown that the method has the ability to improve the throughput performance in heavy traffic loads and the peak value of the throughput, significantly. It is also shown that the average delay performance of the system employing the proposed scheme is superior to that of the conventional system at heavy traffic loads     

The effect of bandwidth allocation policies on delay inunidirectional bus networks

We consider the problem of allocating bandwidth fairly to each node in a shared, unidirectional bus network. We focus on the p_i persistent protocol, since these are open loop policies designed to operate well in high speed networks, which have a very large bandwidth-delay product and feedback in the upstream direction is not available in a timely manner. First, we introduce an improvement to the basic p_i persistent protocol, in which we replace random coin tosses with a deterministic counting algorithm, and thereby reduce the delays for all nodes for any given choice of {p_i}. We then describe an exact method for calculating average packet delays and queue lengths in both the p_i persistent and our new deterministic n out of m protocols, based on the regenerative approach of Georgiades et al. (1987). These delay results, together with simulation measurements, show that both of these protocols still waste some bandwidth. After presenting a lower bounding argument to show that some wasted bandwidth is inevitable in all such distributed access control schemes, assuming a passive bus without feedback in the upstream direction, we show that changing the bus to unidirectional point-to-point links between (very simple) active interfaces at each node allows us to construct distributed access schemes that require no upstream feedback and are both work conserving and fair. To illustrate how this can be done, we introduce the p_i preemptive protocol, in which each node randomly inserts its own packets into the traffic arriving from upstream. We derive a simple and effective heuristic for calculating the preemption probability for each node, and use simulation to show how well it equalizes the delays at each node     

Image coding by multistep, adaptive flux interpolation

The authors describe and discuss the new technique, multistep adaptive flux interpolation (MAFI), and its application to image data for coding. When applied to an image, MAFI produces an output which is also in an image form, but which has a more uniform feature density and a greatly reduced size. MAFI warps the input image by removing those rows and columns which contain a majority of redundant pixels. The side information required for reconstruction is minimal, and the image can be further compressed using conventional coders, making the compression ratio even higher. Because of its warped nature, the MAFI output's statistics are also more consistent with the properties assumed by block-based discrete cosine transform (DCT) methods     

High throughput VLSI DSP using replicated finite rings

This paper discusses strategies for implementing DSP systems using residue replication. The theory, recently introduced by two of the authors, uses formal polynomial ring mappings, from binary representations, to direct product ring implementation of integer processing arrays. The mapping produces completely independent computational arrays each computing over the same ring. This paper describes an architecture and processing array to implement, and take advantage of, the special computational ring structures that result from the mapping. A brief review of the theory and mapping techniques, is followed by the discussion of the architecture and VLSI design of an efficient inner product processing array using Fermat Primes.     

Adaptive digital notch filter design on the unit circle for theremoval of powerline noise from biomedical signals

Investigates adaptive digital notch filters for the elimination of powerline noise from biomedical signals. Since the distribution of the frequency variation of the powerline noise may or may not be centered at 60 Hz. Three different adaptive digital notch filters are considered. For the first case, an adaptive FIR second-order digital notch filter is designed to track the center frequency variation. For the second case, the zeroes of an adaptive IIR second-order digital notch filter are fixed on the unit circle and the poles are adapted to find an optimum bandwidth to eliminate the noise to a pre-defined attenuation level. In the third case, both the poles and zeroes of the adaptive IIR second-order filter are adapted to track the center frequency variation within an optimum bandwidth. The adaptive process is considerably simplified by designing the notch filters by pole-zero placement on the unit circle using some suggested rules. A constrained least mean-squared algorithm is used for the adaptive process. To evaluate their performance, the three adaptive notch filters are applied to a powerline noise sample and to a noisy EEG as an illustration of a biomedical signal     

Flip-chip planar GaInAs/InP p-i-n photodiodes analysis of frequencyresponse

High-speed response, high-manufacturing-yield photodiodes will be needed for optical interconnection in computer and for broadband networks. Frequency responses of a new planar GaInAs/lnP p-i-n photodiode for flip-chip bonding are analyzed. To study changes caused by the new structure, responses are related to device parameters including photoabsorption layer thickness, p-i-n junction diameter, and the size of the forward biased p-i-n junction. Forward biasing is a peculiarity of our photodiodes. A photodiode with an optimized design showed good characteristics     

GIBC formulation for the resonant frequencies and fielddistribution of a substrate-mounted dielectric resonator

Dielectric resonators (DR's) are widely used in telecommunication systems. A method is proposed here to find the resonant frequency and field distribution in a substrate-mounted DR structure. The field of a dielectric rod has been decomposed into a combination of guided modes with unknown coefficients and an unknown continuous spectrum of radiation field. The unknowns are then obtained by applying two generalized impedance boundary conditions (GIBC's) representing the substrate and air layers at the top and bottom of the DR. This leads to the calculation of the total (guided+radiation) field as well as the resonant frequency of the structure     

Aqueous solution and solid state interactions of lanthanide ions with a methacrylic ester polymer bearing pendant 15‐crown‐5 moieties

The interaction between trivalent lanthanide ions and poly(1,4,7,10,13‐pentaoxacyclopentadecan‐2‐yl‐methyl methacrylate), PCR5, in aqueous solution and in the solid state have been studied. In aqueous solution, evidence of a weak interaction between the lanthanides and PCR5 comes from the small red shift of the Ce(III) emission spectra and the slight broadening of the Gd(III) EPR spectra. From the Tb(III) lifetimes in the presence of H₂O and D₂O the loss of one or two water coordinated molecules is confirmed when Tb(III) is bound to PCR5. An association constant of the order of 200 M^?1 was obtained for a 1:1 (lanthanide:15‐crown‐5) complex from the shift of the polymer NMR signals induced by Tb(III). A similar association constant is obtained from the differences of the molar conductivity of Ce(III) solution at various concentrations in presence and absence of PCR5. When Tb(III) is adsorbed on PCR5 membranes, lifetime experiments in H₂O and D₂O confirm the loss of 5 or 6 water coordinated molecules indicating that in solid state the lanthanide(III)‐PCR5 interaction is stronger than in solution. The adsorption of Ce(III) in PCR5 membranes shows a Langmuir type isotherm, from which an equilibrium constant of 39 M^?1 has been calculated. SEM shows that the membrane morphology is not much affected by lanthanide adsorption. Support for lanthanide ion–crown interactions comes from ab initio calculations on 15‐crown‐5/La(III) complex. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1788–1799, 2007