Novel synthesis of heterocycles having a functionalized carbon center via nickel-mediated carboxylation: total synthesis of erythrocarine

Novel synthetic procedure of heterocycles was developed using nickel-mediated alkylative carboxylation, and the total synthesis of erythrocarine was achieved using this method and RCM of dienyne as the key steps. [reaction: see text]     

Trace determination of gadolinium in biomedical samples by diode laser-based multi-step resonance ionization mass spectrometry

The application of high-resolution multi-step resonance ionization mass spectrometry (RIMS) to the trace determination of the rare earth element gadolinium is described. Utilizing three-step resonant excitation into an autoionizing level, both isobaric and isotopic selectivity of >10(7) were attained. An overall detection efficiency of approximately 10(-7) and an isotope specific detection limit of 1.5 x 10(9) atoms have been demonstrated. When targeting the major isotope (158)Gd, this corresponds to a total Gd detection limit of 1.6 pg. Additionally, linear response has been demonstrated over a dynamic range of six orders of magnitude. The method has been used to determine the Gd content in various normal and tumor tissue samples, taken from a laboratory mouse shortly after injection of gadolinium diethylenetriaminepentaacetic acid dimeglumine (Gd-DTPA), which is used as a contrast agent for magnetic resonance imaging (MRI). The RIMS results show Gd concentrations that vary by more than two orders of magnitude (0.07-11.5 microg mL(-1)) depending on the tissue type. This variability is similar to that observed in MRI scans that depict Gd-DTPA content in the mouse prior to dissection, and illustrates the potential for quantitative trace analysis in microsamples of biomedical materials.     

The influence of different InsP(3) receptor isoforms on Ca(2+) signaling in tracheal smooth muscle cells

In airway myocytes, like in many cells, Ca(2+) signaling is controlled by inositol 1,4,5-trisphosphate (InsP(3)) via InsP(3) receptors (InsP(3)R) located in the sarco-endoplasmic reticulum. Three types of InsP(3)R exist, labeled Types 1, 2, and 3, which differ in their gating kinetics. We analyze a possible impact of the different gating kinetics of Type 1 and Type 3 InsP(3)R on the time course of cytosolic Ca(2+) concentration in tracheal smooth muscle cells upon agonist stimulation. Previous experimental data in rat tracheal myocytes showed that upon gradually increased stimulation with acetylcholine (ACh), a contractile agonist that acts via InsP(3) production, signal spikes, several spikes with declining maxima, and sustained oscillations appear. Our model reproduces the time courses of cytosolic Ca(2+) measured in tracheal myocytes. Moreover, by postulating slight variations in the model parameters which determine the total number of receptors expressed and the ratio between Type 1 and Type 3 InsP(3)R, it offers an explanation to the experimental observation of qualitatively different responses of cells within a presumably homogeneous tissue.     

Dimethylformamide as a carbon monoxide source in fast palladium-catalyzed aminocarbonylations of aryl bromides

Dimethylformamide (DMF) acts as an efficient source of carbon monoxide and dimethylamine in the palladium-catalyzed aminocarbonylation (Heck carbonylation) of p-tolyl bromide to provide the dimethylamide. Addition of amines to the reaction mixture in excess delivers the corresponding aryl amides in good yields. The amines employed, benzylamine, morpholine, and aniline, all constitute good reaction partners. The reaction proceeds smoothly with bromobenzene and more electron-rich aryl bromides, but electron-deficient aryl bromides fail to undergo aminocarbonylation. The reactions are conducted at 180-190 degrees C for 15-20 min with microwave heating in a reaction mixture containing imidazole and potassium tert-butoxide: the latter is required to promote decomposition of the DMF solvent at a suitable rate. The beneficial effects of controlled microwave irradiation as an energy source for the rapid heating of the carbonylation reaction mixture are demonstrated. The carbonylation procedure reported herein, which relies on the in situ generation of carbon monoxide, serves as a convenient alternative to other carbonylation methods and is particularly applicable to small-scale reactions where short reaction times are desired and the direct use of carbon monoxide gas is impractical.     

Synthesis,structure, and magnetic properties of dinuclear cobalt(II) complexes with a new phenol-based dinucleating ligand with four hydroxyethyl chelating arms

A new end-off type acyclic ligand with four hydroxyethyl arms, 2,6-bis[bis(2-hydroxyethyl)aminomethyl]-4-methylphenol [H(bhmp)], formed dinuclear cobalt(II) complexes [Co(2)(bhmp)(OAc)(2)]BPh(4) (1) and [Co(2)(bhmp)(OBz)(2)]BPh(4) (2). The complex 1.2.5CH(3)CN (C(50)H(62.5)BCo(2)N(4.5)O(9)) crystallizes in the monoclinic space group C2/c with dimensions a = 25.424(5) A, b = 13.376(2) A, c = 29.913(6) A, beta = 105.930(3) degrees, and V = 9781(3) A(3) and with Z = 8. X-ray diffraction analysis revealed a mu-phenoxo-bis(mu-acetato)dicobalt(II) core structure containing two octahedral cobalt(II) ions. Electronic spectra were investigated for 1 and 2 in the range 400-1800 nm, and the data were typical for the octahedral high-spin cobalt(II) complexes. Magnetic susceptibility was measured for 1 and 2 over the temperature range 4.5-300 K, and the data were analyzed well using our theoretical method. The best fitting parameters were kappa = 0.77, lambda = -116 cm(-1), Delta = 572 cm(-1), and J = -0.44 cm(-1) for complex 1 and kappa = 0.96, lambda = -93 cm(-1), Delta = 616 cm(-1), and J = -0.33 cm(-1) for complex 2.     

Weak intramolecular proton-hydride and proton-fluoride interactions: experimental (NMR, X-ray) and DFT studies of the bis(NBH(3)) and bis(NBF(3)) adducts of 1,3-dimethyl-1,3-diazolidine

Bis(NBH(3)), bis(NBF(3)), and NBF(3)/NBH(3) adducts 1-3 were prepared from 1,3-dimethyl-1,3-diazolidine and characterized by the (1)H, (13)C, (11)B, (19)F, 2D (1)H(-13)C HETCOR and NOESY NMR spectra. The structures and conformations of the adducts were established by the variable-temperature (1)H NMR spectra, the X-ray diffraction method (adduct 2A), and density functional calculations at different theoretical levels. The experimental and theoretical data have revealed that bis adducts 1-3 prefer trans orientations of the borane groups (1A, 2A, 3A) in solution, the solid state, and the gas phase. The studies have shown that the energetic preference of trans adducts with respect to cis compounds, decreasing as 2A (2.9 kcal/mol) > 3A (2.7 kcal/mol) > 1A (1.4 kcal/mol), is dictated by spatially repulsive interactions between the CH(3), BH(3), and BF(3) groups. The results of DFT calculations agree well with an experimental trans/cis isomeric ratio of 9:1 determined in solutions of adduct 1. The calculated geometry and energy, as well as the topological analysis of electronic densities, show that trans adducts 1-3 should exist in gas phase as twist conformations T-2 stabilized by the intramolecular C-H(delta+)...(-delta)H-B or C-H(delta+)...(-delta)F-B interactions. These interactions are characterized as closed-shell. The energy of one proton-hydride and proton-fluoride intramolecular contact, estimated as 1.9 (1A-T-2) and 0.7 (2A-T-2) kcal/mol, respectively, classifies the "elongated" intramolecular interactions CH(delta+)...(-delta)HB and CH(delta+)...(-delta)FB as weak ones. It has been established that, on going from gas phase to a condensed phase (solution and solid), the twist-conformations T-2 transform to conformations T-1, probably by intermolecular dipole-dipole interactions. The data presented in this work show that despite a weakness of the "elongated" proton-hydride and proton-fluoride interactions, they can play a significant role in the stabilization of conformational molecular states, especially when cooperativity is in action.     

Antithrombogenicity of cultured endothelial cell-detached surface

To examine the antithrombogenicity of cultured endothelial cell-detached surface, a simple hybrid vascular model tube consisting of a glass tube and endothelial cells was constructed. To detach the endothelial cells from the inner surface of the model tube, a steady shear stress of 2 or 8 N m(-2) was imposed onto the surface of endothelial cell monolayer by means of a coaxial double cylinder rotational-type apparatus. Coagulation of blood in contact with the endothelial cell-detached surface was examined using a damped oscillation rheometer. Coagulation of whole blood in the cell-detached tube occurred at about 40 min, which was almost the same as that in the endothelial cell-coated tube. A few platelets without shape change adhered to the endothelial cell-detached surface. These data suggest that the endothelial cell-detached surface may exhibit antithrombogenic and anticoagulant surfaces. Biochemical analyses showed that the glass surface, where endothelial cell was detached, was covered with components such as collagen type IV that is considered to be produced from the endothelial cells on the glass surface.     

Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.     

Modification of the cation exchange resin properties by impregnation in polyethyleneimine solutions: application to the separation of metallic ions

A commercial cation exchange resin Amberlite 200 has been modified after immersion in solutions of polyethyleneimine (PEI). The kinetic of fixation of the metallic ions have been determined. The modification of the surface of the resin deals with a change in the order of the affinities of the resins towards cations. The retention is the function of the formation and the stability of the complex. The conditions of modification (pH, PEI concentration and time of immersion) have been examined and the modification was confirmed by the determination of the exchange capacities, the distribution coefficient (P) and the selectivity factors (S). The obtained results revealed the effect of PEI on the exchange properties of the resin. The pH range selected (6-8) permitted a good adherence of PEI onto the resin surface. The quantity of the adsorbed PEI was increased by raising the initial concentration and the immersion period. The exchange capacity for copper ion passed from 2.6 mmol g⁻¹, in the case of unmodified resin, to 3.9 mmol g⁻¹ for the modified one.     

Chemical solution-deposited PbZr 0.53 Ti 0.47 O3 on La 0.5 Sr 0.5 Co O3. SIMS investigation of the effect of different precursor additives on the layer structure

Chemical solution-deposited thin films of PbZr(0.53)Ti(0.47)O(3)/La(0.5)Sr(0.5)CoO(3) on Pt/TiO(2)/SiO(2)/Si substrates have been investigated by dynamic SIMS. The PbZr(0.53)Ti(0.47)O(3) (PZT) is intended to serve as a ferroelectric layer for microelectronic or microelectromechanical applications; conducting La(0.5)Sr(0.5)CoO(3) (LSCO) is a buffer layer intended to eliminate fatigue effects which usually occur at the Pt/PZT interface. Depth profiles of the main components were obtained and revealed that significant diffusion occurred during the deposition and crystallisation processes. Two types of sample, with different thickness of PZT and different types of poly(vinyl alcohol) (PVA) added to the LSCO precursor, were investigated.