双面电弧焊接的传热模型

将等离子焊接(PAW)电弧和钨极氩弧焊(TIG)电弧串接,相对作用于工件的正反面形成双面电弧焊接(DSAW)系统,可以引导焊接电流沿工件厚度方向流过小孔,补偿等离子电弧穿透工件时消耗的能量,以有效地提高等离子弧的穿透能力.综合考虑影响双面电弧焊接正反面熔池几何形状的力学因素,建立了熔池表面变形的控制方程,以此为基础并采用帖体曲线坐标系建立了DSAW焊接传热的数学模型,分析了DSAW,PAW焊接传热的差异,从传热的角度解释了DSAW焊接熔深增加的原因.焊接工艺实验表明,计算结果与实测结果吻合良好. 关键词： 双面电弧焊接(DSAW) 传热模型 熔池表面变形模型     

EFFICIENT SIXTH ORDER P-STABLE METHODS WITH MINIMAL LOCAL TRUNCATION ERROR FOR y"=f(x,y)

1. IntroductionWe consider a class of direct hybrid methods proposed in [11 for solving the second orderinitial value problemy" = f(t,y), y(0),y'(0) given (1.1)The basic method has the formandHere t. = nh and we define t.l.. = t. I aih, i = 1, 2 and n=0,1…     

雷达天线罩上积雪引起的信号电平降低

本文作者已测量过由天线罩上的积雪所引起的接收信号电平和天线方向图的变化,观察到天线罩上雪不对称地堆积时出现的大的信号电平衰减现象。     

用于军事和工业系统的声表面波器件

自从制成了叉指换能器以来,声表面波器件获得了很大的进展.目前,这种器件已经广泛地用于完成复杂系统的信号处理功能方面.     

Electronic Properties of Red P-Type Tl2S5 Single Crystals

Single crystals of red Tl2S5 were prepared by a special modified vertical Bridgman and Stockbarger technique.This growth was performed in our laboratory. The influences of temperature on the electrical conductivity, Hall mobility, carrier concentration, and thermoelectric power (TEP) were carried out in the temperature range 277-413K. Throughout these measurements, various physical parameters such as effective mass of charge carriers,carrier mobility, diffusion coefficient, and the relaxation time for both majority and minority carriers were found.     

Pre—Separation Axioms in Fuzzifying Topology

1　 IntroductionYing[5,6 ] introduced and elementally developed so called fuzzifying topology with the semanticmethod of continuous valued L ogic.Shen[7] introduced and studied T0 -,T1-,T2 (Hausdorff) -,T3(regularity) -,T4 (normality) -separation axioms in fuzzifying topology.In [3 ]the concepts of thefamily of fuzzifying pre-open sets,fuzzifying pre-neighbourhood structure of a point and fuzzifyingpre-closure are introduced and studied.It is worth to mention that pre-separation axioms are …     

Numerical Calculation and Analysis of Track Etching Process

Heavy ion irradiated polymers can be chemically etched to form track membrane with pores in the micro and sub-micro ranges. It has been reported that pore growth during etching can be related to track structures. A latent track has a track core inside and a track halo surrounding the track core. By single track etching it is observed that etching in the track core is much faster than in the track halo where the etching rate is even lower tlian that of bulk material. For multi-track etching, no such stages can be seen by the conductance measurements.     

CO、H_2及HO_2在Co/SiO_2催化剂上吸附的原位红外光谱

用原位IR研究了CO在Co/SiO_2催化剂上的吸附,并考察了吸附的CO与H_2、H_2O的相互作用。CO在Co/SiO_2上的吸附显示出四种不同的吸收峰。2002、2027cm~(-1)归属于端基CO吸附;2120cm~(-1)归属于CO在钴离于上的吸附;1870cm~(-1)为CO的桥式吸附;1720cm~(-1)则为多中心吸附。当温度高于370K时,吸附的CO会完全脱附。H_2与吸附的CO相互作用可削弱CO吸收峰的强度,并逐步在低波数(1980cm~(-1))处产生一个小肩。水与吸附的CO相互作用产生一种甲酸基物种(1585、1390cm~(-1))。该物种被认为是Kòlbel-Engelhardt反应的中间体。     

α-FUZZY PAIRWISE RETRACT OF L-VALUED PAIRWISE STRATIFICATION SPACES

The notion of a fuzzy retract was introduced by Rodabaugh (1981). The notion of a fuzzy pairwise retract was introduced in 2001. Some weak forms and some strong forms of α-continuous mappings were introduced in 1988 and 1997. The authors extend some of these forms to the L-fuzzy bitopological setting and construct various α-fuzzy pairwise retracts. The concept of weakly induced spaces in the case L = [0,1] was introduced by Martin (1980). Liu and Luo (1987) generalized this notion to the case that L is an arbitrary F-lattice and introduced the notion of induced L-fts. Several results are obtained, especially, for L-valued pairwise stratification spaces.     

复合多层介质在可变温度和集中荷载作用下的位移和应力

研究了多层介质中的热弹性位移和应力.多层介质具有不同厚度,各层又具有不同的弹性性质,最上层表面上作用热荷载和集中荷载.假设各层分别是均匀、各向同性弹性材料,各层相关的位移分量是轴对称的,对称轴为各层表面的垂线.因此,各层应力函数满足无体力的单一方程.利用积分变换法求解了该方程,对由任意多个层数构造的多层介质,给出了其相应层数基础热弹性位移和应力的解析表达式.并对3层介质和4层介质时的数值结果进行了比较.