Radiotracer studies of the antitumor metallocene molybdocene dichloride with biomolecules

Neutron irradiation of Cp₂MoCl₂ for 24 h afforded the radiotracer Cp₂⁹⁹MoCl₂ which was characterised by UV–Vis spectroscopy and thin layer chromatography. Binding experiments with the thiol containing protein human serum albumin (HSA) or calf thymus DNA, were monitored for ⁹⁹Mo using a gamma counter. Under the conditions investigated, molar ratios of binding of 0.2:1 (Cp₂MoCl₂:DNA) and 9.4:1 (Cp₂MoCl₂:HSA) were calculated. The results are consistent with in vitro coordination studies that have shown strong preferential interaction of Cp₂MoCl₂ with thiols versus other donor sites in biomolecules including DNA.     

Improvements in Depth Selective Electron Mössbauer Spectroscopy

The conditions for achievement of high resolving power of depth selective conversion electron Mössbauer spectroscopy method at a combined installation ‘electron spectrometer–nuclear gamma-resonance spectrometer’ have been obtained. There has been made a considerable step in development of the method at its realization at a magnetic sector electron spectrometer with double focusing, equipped with electron source (a sample under investigation) of large-area and position-sensitive detector. The paper presents a prospective symmetrical version of a magnetic sector electron spectrometer that allows realizing more completely possibilities of the method. It is noted that the proposed method is particularly valuable for investigations of nanosystems, nanostrutures that contain Mössbauer nuclei.     

A ring-closing metathesis route to 7-membered aza-heteroannulated sugars

Azepane rings have been constructed diastereoselectively upon a carbohydrate derivative utilising reductive amination and RCM. The stereochemistry of the ring junctions was confirmed by X-ray crystallography and NMR. Diastereoselective dihydroxylation has also been employed to afford a tetrahydroxylated azepane carbohydrate derivative with potential biological activity.     

Hydrogen generation in nitric acid solutions of plutonium

Summary Literature data on the radiolytic generation of hydrogen in nitric acid solutions of plutonium are used to construct a model that predicts G(H₂) as a function of the nitric acid and plutonium concentrations. The model indicates that G(H₂) decreases with increasing concentration of nitric acid, in agreement with most experimental observations. The effect of the plutonium concentration on G(H₂) is secondary to the effect of the acid concentration. An equation for interpolating Gvalues for total gas is included.     

Robust autoregressive predictive power control method for mobile CDMA systems

A closed-loop power control (CLPC) scheme with a multistep (indicating multiple prediction steps) linear autoregressive predictor is presented. The proposed CLPC relies on low-rate sample vector based autoregressive prediction. Compared to currently available predictive CLCP schemes, it demonstrates particularly robust performance in the presence of large loop delays and channel estimation errors.     

Results from GRACE/SUSY at one-loop

We report the recent development on the SUSY calculations with the help of GRACE system. GRACE/SUSY/1LOOP is the computer code which can generate Feynman diagrams in the MSSM automatically and compute one-loop amplitudes in the numerical way. We present new results of various two-body decay widths and chargino pair production at ILC (international linear collider) at one-loop level.      

64-Mb/s data transmission beyond the relaxation oscillation frequency using monolithically integrated two laterally coupled diode lasers

In this letter, we demonstrate the possibility of using two monolithically integrated laterally coupled diode lasers for data transmission beyond the intrinsic relaxation oscillation frequency of semiconductor lasers. The resonance of the lateral modes of such structure provides a peak in the small signal modulation response of the device above the relaxation oscillation frequency of the intrinsic emitters that is studied in terms of relative intensity noise and phase noise to characterize this new, simple, and compact device. Optical transmission of a 64-Mb/s pseudorandom bit sequence signal using a microwave carrier over this resonance peak of the lateral modes above the relaxation oscillation is demonstrated for the first time to our knowledge.     

Polarization dynamics of intracavity frequency-doubled Nd:YAG laser

Experimental study of low-frequency dynamics of an intracavity frequency-doubled Nd:YAG laser demonstrates the influence of the interaction of orthogonally polarized modes, participating in frequency doubling (type II phase matching), on the stability of the laser output. At a sufficiently low pump rate and low conversion efficiency, the laser shows stable operation with a low noise level at the frequencies of relaxation oscillations. At a high pump power and/or a high conversion efficiency, the laser emission becomes unstable as a result of Hopf bifurcation at the frequencies of relaxation oscillations that are responsible for the anti-phase polarization dynamics of the laser.     

Driving Mechanisms of Delamination Related Reliability Problems in Exposed Pad Packages

Exposed pad packages were introduced in the late 1980s and early 1990s because of their excellent thermal and electrical performance. Despite these advantages, the exposed pad packages experience a lot of thermo-hygro-mechanical related reliability problems during qualification and testing. Examples are die lift, which occurs predominantly after moisture sensitivity level conditions, and die-attach to leadframe delamination leading to downbond stitch breaks during temperature cycling. In this chapter, nonlinear finite element (FE) models using fracture mechanics based J-integral calculations are used to assess the reliability problems of the exposed pad package family. Using the parametric FE models any geometrical and material effects can be explored to their impact on the occurrence diepad delamination, and dielift. For instance the impact of diepad size is found to be of much less importance as the impact of die thickness is. Using the fracture mechanics approach, the starting location for the delamination from thermo-hygro-mechanical point of view is deducted. The results indicate that when diepad delamination is present, cracks are likely to grow beneath the die and dielift will occur. The interaction between dielift and other failure modes, such as lifted ball bonds, are not found to be very significant. The FE models are combined with simulation-based optimization methods to deduct design guidelines for optimal reliability of the exposed pad family.     

Miniature in vivo robots for remote and harsh environments

Long-term human space exploration will require contingencies for emergency medical procedures including some capability to perform surgery. The ability to perform minimally invasive surgery (MIS) would be an important capability. The use of small incisions reduces surgical risk, but also eliminates the ability of the surgeon to view and touch the surgical environment directly. Robotic surgery, or telerobotic surgery, may provide emergency surgical care in remote or harsh environments such as space flight, or extremely forward environments such as battlefields. However, because current surgical robots are large and require extensive support personnel, their implementation has remained limited in forward environments, and they would be difficult, or impossible, to use in space flight or on battlefields. This paper presents experimental analysis of miniature fixed-base and mobile in vivo robots to support MIS surgery in remote and harsh environments. The objective is to develop wireless imaging and task-assisting robots that can be placed inside the abdominal cavity during surgery. Such robots will provide surgical task assistance and enable an on-site or remote surgeon to view the surgical environment from multiple angles. This approach is applicable to long-duration space flight, battlefield situations, and for traditional medical centers and other remote surgical locations.