Vibrational EELS and DFT study of propionic acid and pyruvic acid on Ni(1 0 0): Effects of keto group substitution on room-temperature adsorption and thermal chemistry

The room-temperature adsorption and thermally induced processes of propionic acid and pyruvic acid on Ni(1 0 0) have been investigated by electron energy loss spectroscopy (EELS). Computational vibrational analysis of the optimized bidentate structures for acid-Ni model complexes (involving the organic acid and a Ni atom) has been performed by using the two-layer ONIOM method with the Density Functional Theory and used to interpret the vibrational EELS data. Dehydrogenation of the hydroxyl group is found to result in bonding of the carboxylate group in the propionate and pyruvate adspecies to either a single Ni surface atom in a bidentate configuration or two neighbouring Ni atoms in a bridge configuration. Given the similarities in the total energies and related vibrational frequencies obtained by the calculations in the case of pyruvate adspecies, it is difficult to differentiate the alternate adsorption structure, in which the keto O and hydroxyl O atoms are bonded to a Ni atom in a five-member chelate ring configuration. Furthermore, temperature-dependent EELS studies show that both the propionate and pyruvate adspecies could decompose upon annealing to above 400 K and further dissociate to CO adspecies above 550 K and to C and/or O above 600 K.     

The electron ionization rate in multilayered semiconductor structures

We present theoretical results of the electron impact ionization rate in GaAs/AlGaAs multiquantum well structures as a function of applied electric field for various geometries, i.e., well and barrier widths. In addition, we present preliminary measurements of the current-voltage characteristics of MBE grown devices which demonstrate very low leakage current as well as sharp breakdwon behavior. It is found that the net ionization rate, determined by averaging over the constitutent GaAs and AlGaAs layers, approaches the weighted average of the constituent bulk rates at high electric field strengths; the potential discontinuity is relatively unimportant. The electron ionization rate within the well regions alone is still higher than that in bulk GaAs, but is insufficiently enhanced to compensate for the much lower rate in the AlGaAs layers. As the field is lowered to 250.0 kV/cm, the average ionization rate in the multiquantum well structure becomes larger than in the bulk.     

Multirobot-Based Nanoassembly Planning with Automated Path Generation

In this paper, a novel approach of automated multirobot nanoassembly planning is presented. This approach uses an improved self-organizing map to coordinate assembly tasks of nanorobots while generating optimized motion paths at run time with a modified shunting neural network. It is capable of synchronizing multiple nanorobots working simultaneously and efficiently on the assembly of swarms of objects in the presence of obstacles and environmental uncertainty. Operation of the presented approach is demonstrated with experiments at the end of the paper.     

A Subcarriers Allocation Scheme for Cognitive Radio Systems Based on Multi-Carrier Modulation

Cognitive radio (CR) is a dynamic spectrum access technology as a solution to spectrum under-utilization problem in some licensed bands. Operating over an exceedingly wide spectrum, CR systems usually adopt multi-carrier modulation (MCM) to implement flexible channelization. Consequently, efficient channel allocation scheme becomes extremely important to an MCM based CR (MCM-CR) system. In this paper, a maximum likelihood detection model is developed to detect the presence and locations of licensed users (LUs) signals in the frequency domain. Performance of the detection model, including the optimal detection region, detection probability and false alarm probability, is analyzed. A one-order two-state Markovian chain model is proposed to predict channel status information. In particular, a novel subcarrier allocation scheme for MCM-CR systems is proposed, taking into account the confidence of channel estimation, quality of services (QoS) of rental users (RUs) and throughput. To validate the analytical results, simulations have been conducted to show effectiveness of the proposed scheme.     

Detection of failure sites by focused ion beam and nano-probing in the interconnect of three-dimensional stacked circuit structures

Focused ion beam (FIB) and nano-probing were applied for failure analysis of three-dimensional stacked circuits with copper through-silicon-vias between the stacked chips. The failure analysis was done after high temperature storage and thermal cycling tests. Passive voltage contrast in FIB allowed to pinpoint the open sites. FIB cross-sections showed the presence of opens at the bottom of the copper vias. The failure cause was suspected to be an interlayer particle, which was confirmed by optical profilometry. Nano-probing was used on another sample to pinpoint the failure location through the measurement of the local resistance within the daisy chains. The failure was traced out to be related with surface contamination.     

Precise measurement of magnetic moment of short-lived β-emitting nuclei12B ( I π=1+, T 1/2=20.18 ms)

The spin polarized β-emitting nuclei¹²B (I ^π=1⁺,T _1/2=20.18 ms) were produced by the nuclear reaction¹¹B(d, p)¹²B and by the selection technique of the incident deuteron energy and the¹²B recoil angle following the nuclear reaction. The nuclear magnetic moment of the short-lived nuclei¹²B was measured by β-NMR with the β-NMR and β-NQR setup established for the first time in China. The nuclear magnetic moment of¹²B was determined to be μ=0.99993±0.00048 nm org=0.99993±0.00048 after the precise correction of the Knight shift.     

Dispersion and distribution of organically modified montmorillonite in nylon‐66 matrix

Nylon‐66 nanocomposites were prepared by melt‐compounding nylon‐66 with an alkyl ammonium surfactant pretreated montmorillonite (MMT). The thermal stability of the organic MMT powders was measured by thermogravimetric analysis. The decomposition of the surfactant on the MMT occurred from 200 to 500 °C. The low onset decomposition temperature of the organic MMT is one shortcoming when it is used to prepare polymer nanocomposites at high melt‐compounding temperatures. To provide greater property enhancement and better thermal stability of the polymer/MMT nanocomposites, it is necessary to develop MMT modified with more thermally stable surfactants. The dispersion and spatial distribution of the organic MMT layers in the nylon‐66 matrix were characterized by X‐ray diffraction. The organic MMT layers were exfoliated but not randomly dispersed in the nylon‐66 matrix. A model was proposed to describe the spatial distribution of the organic MMT layers in an injection‐molded rectangular bar of nylon‐66/organic MMT nanocomposites. Most organic MMT layers were oriented in the injection‐molding direction. Layers near the four surfaces of the bar were parallel to their corresponding surfaces; whereas those in the bulk differed from the near‐surface layers and rotated themselves about the injection‐molding direction. The influence of the spatial distribution of the organic MMT on crystallization of nylon‐66 was also investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1234–1243, 2003     

Does the beam width affect the generalized M factor of hard-edged diffracted beams?

A detailed study of the generalized M² factor of hard-edged diffracted beams based on the truncated second-order moments method, asymptotic analysis and self-convergent beam width approach is performed. The dependence of the generalized M² factor on the parameters characterizing the spatial profile, and beam truncation, etc. is analyzed.     

The elastic theory of a single DNA molecule

We study the elastic responses of double-(ds) and single-stranded (ss) DNA at external force fields. A double-strand-polymer elastic model is constructed and solved by path integral methods and Monte Carlo simulations to understand the entropic elasticity, cooperative extensibility, and supercoiling property of dsDNA. The good agreement with experiments indicates that short-ranged base-pair stacking interaction is crucial for the stability and the high deformability of dsDNA. Hairpin-coil transition in ssDNA is studied with generating function method. A threshold force is needed to pull the ssDNA hairpin patterns, stabilized by base pairing and base-pair stacking, into random coils. This phase transition is predicted to be of first order for stacking potential higher than some critical level, in accordance with experimental observations.     

正确的答案错误的解法

有些题目即使解法不正确,也可能得出正确的答案. 如果注意了答案对但解法错的情况,让学生判别其正误,那么对于物理概念的理解、物理规律的掌握、思维能力的提高都将起重要作用. 例l 重10N的均匀木棒AB长为L,B端放在地面上,A端用竖直的绳子吊起(图