Terahertz Semiconductor Quantum Well Devices

For eventually providing terahertz science with compact and convenient devices,terahertz (1～10THz) quantum-well photodetectors and quantum-cascade lasers are investigated. The design and projected detector performance are presented together with experimental results for several test devices,all working at photon energies below and around optical phonons. Background limited infrared performance (BLIP) operations are observed for all samples (three in total) ,designed for different wavelengths. BLIP temperatures of 17,13, and 12K are achieved for peak detection frequencies of 9.7THz(31μm) ,5.4THz(56μm) ,and 3.2THz(93μm) ,respectively. A set of THz quantum-cascade lasers with identical device parameters except for doping concentration is studied. The δ-doping density for each period varies from 3.2 × 1010 to 4. 8 × 1010cm-2. We observe that the lasing threshold current density increases monotonically with doping concentration. Moreover, the measurements for devices with different cavity lengths provide evidence that the free carrier absorption causes the waveguide loss also to increase monotonically. Interestingly the observed maximum lasing temperature is best at a doping density of 3.6 × 1010cm-2.     

A novel frequency offset estimation method for OFDM systems with large estimation range

In this paper, we proposed a novel frequency synchronization method which has larger estimation range than conventional method proposed by Tufvesson. A two steps frequency offset estimation method is performed in the new method. In the first step the received signal is correlated with local training sequence to eliminate the influence of training sequence which makes the estimation range of frequency offset is independent of period of the repeated data in the training sequence. The received signal is correlated with its delay in the second step to obtain the fine estimation of frequency offset. Precise estimation can be achieved in the proposed method than Tufvesson's method. The period of the repeated data in the training sequence determines the estimation range of the frequency offset in the conventional method, while in the new method they are irrelevant. Tens of subcarriers spacing can be estimated by the new method. The new method can be used in other cases as long as a known sequence is transmitted, which will introduce valuable flexibility in training sequence design. The validity of the algorithm is verified in AWGN channel and multipath fading channel.     

变压器型式试验的样品组成和样品数量的确定(上)

研究和讨论了GB 19212.1-2003,5.2和附录B分别规定的单规格变压器的试验规则和"系列变压器的试验"规则,提出了确定变压器型式试验的样品组成和样品数量的一种可操作的方案.     

Seed‐Mediated Synthesis of Gold Tetrahedra in High Purity and with Tunable,Well‐Controlled Sizes

We report a facile synthesis of Au tetrahedra in high purity and with tunable, well‐controlled sizes via seed‐mediated growth. The success of this synthesis relies on the use of single‐crystal, spherical Au nanocrystals as the seeds and manipulation of the reaction kinetics to induce an unsymmetrical growth pattern for the seeds. In particular, the dropwise addition of a precursor solution with a syringe pump, assisted by cetyltrimethylammonium chloride and bromide at appropriate concentrations, was found to be critical to the formation of Au tetrahedra in high purity. Their sizes could be readily tuned in the range of 30–60 nm by simply varying the amount of precursor added to the reaction solution. The current strategy not only enables the synthesis of Au tetrahedra with tunable and controlled sizes but also provides a facile and versatile approach to reducing the symmetry of nanocrystals made of a face‐centered cubic lattice.     

Effects of pattern dependence on high-power polarization-division-multiplexing applications

High-power polarization-division-multiplexing (PDM) systems or functional modules, such as self-phase-modulation (SPM)-based all-optical regenerators, cross-phase-modulation (XPM)-based wavelength convertors or format convertors, all-optical logical gate, and so on, may suffer from the effects of pattern dependence. Such effects are experimentally investigated using relative time delay variation between bit sequences with orthogonal polarization states in a 2 × 10.65 Gb/s high-power on-off keying (OOK) PDM system. Eye-diagram-based signal-to-noise ratio (SNR) and bandwidth of broadened spectrum are measured and compared. An eye-diagram-based SNR fluctuation of up to 4 dB may occur as the delay changes.     

Electrostatic Interactions Leading to Hierarchical Interpenetrating Electroconductive Networks in Silicon Anodes for Fast Lithium Storage

Recently, the frequency of combining MXene, which has unique properties such as metal-level conductivity and large specific surface area, with silicon to achieve excellent electrochemical performance has increased considerably. There is no doubt that the introduction of MXene can improve the conductivity of silicon and the cycling stability of electrodes after elaborate structure design. However, most exhaustive contacts can only improve the electrode conductivity on the plane. Herein, a MXene@Si/CNTs (HIEN-MSC) composite with hierarchical interpenetrating electroconductive networks has been synthesized by electrostatic self-assembly. In this process, the CNTs are first combined with silicon nanoparticles and then assembled with MXene nanosheets. Inserting CNTs into silicon nanoparticles can not only reduce the latter‘s agglomeration, but also immobilizes them on the three-dimensional conductive framework composed of CNTs and MXene nanosheets. Therefore, the HIEN-MSC electrode shows superior rate performance (high reversible capacity of 280 mA h⁻¹ even tested at 10 A g⁻¹), cycling stability (stable reversible capacity of 547 mA h g⁻¹ after 200 cycles at 1 A g⁻¹) and applicability (a high reversible capacity of 101 mA h g⁻¹ after 50 cycles when assembled with NCM622 into a full cell). These results may provide new insights for other electrodes with excellent rate performance and long-cycle stability.     

Synthesis, Structure and H+/K+-ATPase Inhibitory Activity of Novel Triazolyl Substituted Tetrahydrobenzofuran Derivatives via One-pot Three-component Click Reaction

Eleven triazolyl substituted tetrahydrobenzofuran derivatives were synthesized in high yields as novel H⁺/K⁺‐ATPase inhibitor via one‐pot CuI‐catalyzed three‐component click reaction of azide, secondary amine and 3‐bromopropyne under mild conditions in water. Their structures were characterized by NMR, IR, ESI‐MS, elemental analysis and single‐crystal X‐ray diffraction analysis. Most of the target compounds exhibited better H⁺/K⁺‐ATPase inhibitory activity than commercial omeprazole with IC₅₀ values less than 15 µmol·L^?1. The initial structure‐activity analysis suggested that the triazole substituted by cycloalkyl, aromatic ring or O‐containing side‐chain seemed to be beneficial for enhancing the activity.     

A dissipation‐free numerical method to solve one‐dimensional hyperbolic flow equations

In this paper, a numerical method to capture the shock wave propagation in 1‐dimensional fluid flow problems with 0 numerical dissipation is presented. Instead of using a traditional discrete grid, the new numerical method is built on a range‐discrete grid, which is obtained by a direct subdivision of values around the shock area. The range discrete grid consists of 2 types: continuous points and shock points. Numerical solution is achieved by tracking characteristics and shocks for the movements of continuous and shock points, respectively. Shocks can be generated or eliminated when triggering entropy conditions in a marking step. The method is conservative and total variation diminishing. We apply this new method to several examples, including solving Burgers equation for aerodynamics, Buckley‐Leverett equation for fractional flow in porous media, and the classical traffic flow. The solutions were verified against analytical solutions under simple conditions. Comparisons with several other traditional methods showed that the new method achieves a higher accuracy in capturing the shock while using much less grid number. The new method can serve as a fast tool to assess the shock wave propagation in various flow problems with good accuracy.