直接酯化法合成PET反应条件对树脂结晶速率的影响

用直接酯化法合成了聚对苯二甲酸乙二酯（ＰＥＴ）。对缩聚反应温度、真空度及稳定剂等合条件对产物结晶速率的影响进行了研究。以ΔＴｃ＝Ｔｃ－Ｔｇ和ΔＴｃｏ＝Ｔｃｏ－Ｔｇ表征样品的结晶速率。结果表明，真空度一定，反应温度高则样品结晶速率慢；温度一定，真空度高样品结晶速率也慢。这两个因素的影响均是不可忽视的。     

Polycyclic pyridazines. II [3]. Synthesis of pyrazolo[4′,3′:5,6]pyrido[2,3-d]pyrid-azine derivatives from dimethyl pyrazolo[3,4-d]pyrid-azine-5,6-dicarboxylates as the key intermediates

The synthesis of the novel pyrazolo[4′,3′:5,6]pyrido[2,3-d]pyridazine ring system and some of its derivatives has been accomplished such as 4-amino-1-phenyl-5,8-dioxo-, 4-amino-5,8-dioxo-, 1-phenyl-5,8-dioxo-, 5,8-dioxo-, 5,8-dichloro-1-phenyl-, 5-ethoxy-1-phenyl- and 8-ethoxy-1-phenylpyrazolo[4′,3′:5,6]pyrido[2,3-d]pyrid-azines.     

铬天青S共振光散射法测定脱氧核糖核酸

介绍在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)存在下阴离子染料铬天青S(CAS)共振光散射(RLS)法测定脱氧核糖核酸(DNA)的方法。在pH=5．27的六次甲基四铵一盐酸缓冲溶液中，研究了CAS—CT-MAB—yDNA体系的RLS光谱特征、影响因素和最佳反应条件。在最佳条件下，体系的RLS强度增加值△I与yDNA的浓度在50～800μg／L和1000～2000μg／L呈线性关系，其线性回归方程分别为△I=0．48c 2．56和△I=0．14c 17．86，相关系数分别为0．9997和0．9991，检出限为4．3ng／mL。该方法简便、快速，应用于合成样品中yDNA的测定，测定结果的相对标准偏差为2．93％～4．71％，回收率为97．8％～105．2％。     

How does huperzine A enter and leave the binding gorge of acetylcholinesterase? Steered molecular dynamics simulations

The entering and leaving processes of Huperzine A (HupA) binding with the long active-site gorge of Torpedo californica acetylcholinesterase (TcAChE) have been investigated by using steered molecular dynamics simulations. The analysis of the force required along the pathway shows that it is easier for HupA to bind to the active site of AChE than to disassociate from it, which for the first time interprets at the atomic level the previous experimental result that unbinding process of HupA is much slower than its binding process to AChE. The direct hydrogen bonds, water bridges, and hydrophobic interactions were analyzed during two steered molecular dynamics (SMD) simulations. Break of the direct hydrogen bond needs a great pulling force. The steric hindrance of bottleneck might be the most important factor to produce the maximal rupture force for HupA to leave the binding site but it has a little effect on the binding process of HupA with AChE. Residue Asp72 forms a lot of water bridges with HupA leaving and entering the AChE binding gorge, acting as a clamp to take out HupA from or put HupA into the active site. The flip of the peptide bond between Gly117 and Gly118 has been detected during both the conventional MD and SMD simulations. The simulation results indicate that this flip phenomenon could be an intrinsic property of AChE and the Gly117-Gly118 peptide bond in both HupA bound and unbound AChE structures tends to adopt the native enzyme structure. At last, in a vacuum the rupture force is increased up to 1500 pN while in water solution the greatest rupture force is about 800 pN, which means water molecules in the binding gorge act as lubricant to facilitate HupA entering or leaving the binding gorge.     

Modeling the dynamics of DNA electrophoresis on a flat surface

We use molecular dynamics simulations to study the mechanism by which a flat, homogeneous surface can serve as an electrophoretic separation medium for DNA. We find that the mobility of DNA on the surface is a function of the conformation of the adsorbed DNA molecule, and that this mobility is controlled by the attraction between the DNA and the surface. Our results will provide guidelines for the fabrication of surfaces that can be used to separate DNA in a wide size range.     

Spectroscopic studies on inclusion properties of fullerenocalix[4]arene conjugates with metal ions

Metal-chelating properties-in the ground and excited states-of fullerenocalix[4]arenes containing two malonamide substituents at the upper rim and four alkyl ester chains at the lower rim have been studied by means of steady-state absorption, fluorescence spectroscopy, and time-resolved transient absorption spectra. In particular, the influence that Ag+ enforces on the fullerene electronic spectra is due to direct interactions between Ag+ and the surface of C60. The effects stemming from Na+, Mg2+, and Ba2+, on the other hand, are indirect and are introduced through chelating the metal ions to the calix[4]arene moiety. They strongly depend on the molecular structure of the fullerenocalix[4]arenes. No spectroscopic evidence was obtained for any influence caused by Mn2+, although the malonamide groups provide good chelating ability even for this transition metal ion.     

氢甲酰化反应溶剂效应的量子化学研究

在B3LYP/6-31G(d, p)(Rh和P采用LANL2DZ + Polar)水平下,利用自洽反应场（SCRF）的Onsager模型,系统研究了C6H12、C6H6、THF、CH2Cl2、CH3OH和H2O（相对介电常数ε分别为2.02、2.25、7.58、8.93、32.63和78.39）六种溶剂对乙烯氢甲酰化反应中各驻点的结构和反应机理的影响.分别在上述溶剂中优化了反应物、产物、中间体和过渡态的结构,并计算了自由能和活化自由能.计算结果表明,不同溶剂对反应势能面上各驻点的结构和能量均有一定的影响,而且随着相对介电常数ε的增加,反应的活化自由能下降.水是以上六种溶剂中最佳的溶剂,这与大量的实验研究结果一致.     

Triboelectric pulsed direct current for self-powered sterilization of cellulose fiber

A variety of liquid energy exists in papermaking engineering and has not yet been developed and utilized. In addition, for the papermaking industry, the presence of slime can seriously affect the quality of the finished paper and can lead to paper breaking. The current slime control strategies cannot completely solve the problem and also have some low toxicity. In this study, a method of self-powered sterilization of cellulose fibers by using triboelectric pulsed direct current is reported. A liquid–solid triboelectric nanogenerator (L–S TENG) was used to convert the liquid energy of nanocellulose suspension into electrical energy and convert this electrical energy into pulsed direct current for self-powered sterilization of cellulose fiber. A hydrophobic coating material is used as solid triboelectric material and electrode for sterilization. Driven by L–S TENG, the electrodes exhibited an excellent sterilization rate against four microorganisms including Escherichia coli, Aspergillus niger, Candida albicans, and Klebsiella pneumoniae, which from slime in the papermaking industry. This study could provide a basic research theory for liquid energy harvesting in the papermaking industry, and also provide a new strategy for pulp sterilization.

Graphical abstract

     

Multilayer poly(vinyl alcohol)-adsorbed coating on poly(dimethylsiloxane) microfluidic chips for biopolymer separation

A poly(dimethylsiloxane) (PDMS) microfluidic chip surface was modified by multilayer-adsorbed and heat-immobilized poly(vinyl alcohol) (PVA) after oxygen plasma treatment. The reflection absorption infrared spectrum (RAIRS) showed that 88% hydrolyzed PVA adsorbed more strongly than 100% hydrolyzed one on the oxygen plasma-pretreated PDMS surface, and they all had little adsorption on original PDMS surface. Repeating the coating procedure three times was found to produce the most robust and effective coating. PVA coating converted the original PDMS surface from a hydrophobic one into a hydrophilic surface, and suppressed electroosmotic flow (EOF) in the range of pH 3-11. More than 1,000,000 plates/m and baseline resolution were obtained for separation of fluorescently labeled basic proteins (lysozyme, ribonuclease B). Fluorescently labeled acidic proteins (bovine serum albumin, beta-lactoglobulin) and fragments of dsDNA phiX174 RF/HaeIII were also separated satisfactorily in the three-layer 88% PVA-coated PDMS microchip. Good separation of basic proteins was obtained for about 70 consecutive runs.     

Sorption of 241Am by Aspergillus nigerspore and hyphae

Biosorption of ²⁴¹Am by a fungus A. niger, including the spore and hyphae, was investigated. The preliminary results showed that the adsorption of ²⁴¹Am by the microorganism was efficient. More than 96% of the total ²⁴¹Am could be removed from ²⁴¹Am solutions of 5.6-111 MBq/l (C _o) by spore and hyphaeof A. niger, with adsorbed ²⁴¹Am metal (Q) of 7.2-142.4 MBq/g biomass, and 5.2-106.5 MBq/g, respectively. The biosorption equilibrium was achieved within 1 hour and the optimum pH range was pH 1-3. No obvious effects on ²⁴¹Am adsorption by the fungus were observed at 10-45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above the ²⁴¹Am concentration. The ²⁴¹Am biosorption by the fungus obeys the Freundlich adsorption equation. There was no significant difference between the adsorption behavior of A. nigerspore and hyphae. This revised version was published online in July 2006 with corrections to the Cover Date.