聚丙烯腈高分子半导体纤维的研究——聚丙烯腈高分子半导纤维的制备及其半导体特性

经四氯化锡处理的聚丙烯腈纤维,在进一步热处理过程中可以成为一种高分子半导纤维。它具有如下四个特点:1.纤维电阻率在10~3—10~(12)欧姆·厘米范围内可以控制热处理温度而随意调节。2.水解处理干燥后纤维的电阻值基本不变。3.有足够的机械强度可以进行多种形式的加工。4.纤维的电阻-温度、电导率-频率依赖关系,直流伏-安特性的试验结果表明它具有有机半导体特性,是一种兼有良好电性能和力学性能的高分子半导纤维。     

铟(Ⅲ)-7-(1-苯偶氮)-8-羟基喹啉-5-磺酸钠的配位吸附波及其应用

在ｐＨ４．５的 ０．０１５ ｍｏｌ／Ｌ ＨＡｃ－ＮａＡｃ介质中，Ｉｎ铟（Ⅲ）－７－（１－苯偶氮）－８－羟基喹啉－５－磺酸钠（ＢＱ）在滴汞电极上于－０．６６５－０．７０ Ｖ（ｖｓ．ＳＣＥ）电位处得到络合物的吸附还原波，其一阶导数峰电流Ｉ＇ｐ与Ｉｎ（Ⅲ）浓度在４．０× １０~（－８）～３．５ × １０~（－６）ｍｏｌ／Ｌ范围内呈良好的线性关系，检测限为１．６ × １０~（－８）ｍｏｌ／Ｌ Ｉｎ（Ⅲ）．应用该法测定了铅粉和氢氧化铝样品中的微量铟，结果令人满意。对电极反应机理进行了探讨。     

Cadinene Derivatives from Eupatorium adenophorum

A new norsesquiterpene named eupatorone (= (4S,4aR,6R)‐1‐acetyl‐6‐(acetyloxy)‐4,4a,5,6‐tetrahydro‐4,7‐dimethylnaphthalen‐2(3H)‐one; 1 ) and a new sesquiterpene derivative named 2‐deoxo‐2‐(acetyloxy)‐9‐oxoageraphorone (= (1R,4S,4aR,6R,8aS)‐6‐(acetyloxy)‐3,4,4a,5,6,8a‐hexahydro‐4,7‐dimethyl‐1‐(1‐methylethyl)naphthalen‐2(1H)‐one; 2 ), together with the five known cadinene derivatives 3 – 7 were isolated from the flower of Eupatorium adenophorum (Spreng. ). Their structures were established by extensive NMR experiments, including 1D and 2D NMR.     

Mixed Cationic‐nonionic Surfactants and pH Adjustment Route to Synthesize High‐quality MCM‐48

Using the mixture of cetyltrimethylammonium bromide (CTAB) and p‐Octyl polyethylene glycol phenyl ether (OP‐10) as templates, siliceous MCM‐48 materials can be synthesized with low molar ratio of CTAB to silica (0.139:1) and low concentration of mixed surfactants (ca.5%) and within a wide range of OP‐10/CTAB ratio (0.08?0.25). The materials were characterized by X‐ray powder diffraction, N₂ adsorption/desorption isotherm, TEM, TG‐DSC and ²⁹Si MAS NMR. Measurements indicated that the use of mixed surfactants allowed better condensation and higher ordering of the cubic mesostructure; at the same time, some properties of these materials were sensitive to the OP‐10/CTAB ratio. It was also found that the reduced pH of the gel which had been crystallized for a certain time gave a highly reproducible synthesis with a high silica yield (about 95%). Furthermore, the reaction mechanism of the synthesis is discussed in detail.     

Flow/sequential injection determination of gaseous ammonia with a glass diffusion denuder

A new combination of a flow/sequential injection method for the analysis of ammonia has been developed. Gaseous ammonia is selectively absorbed in a phosphoric acid coated glass tube and determined with Berthelot reagents by flow injection. The combination of the gas diffusion denuder sampler with flow injection makes this method very sensitive and selective. The limit of detection of 0.15 mug NH(3).     

First principles study of small palladium cluster growth and isomerization

Structures and physical properties of small palladium clusters Pd_n up to n = 15 and several selected larger clusters were studied using density functional theory under the generalized gradient approximation. It was found that small Pd_n clusters begin to grow 3‐dimensionally at n = 4 and evolve into symmetric geometric configurations, such as icosahedral and fcc‐like, near n = 15. Several isomers with nearly degenerate average binding energies were found to coexist and the physical properties of these clusters were calculated. For several selected isomers, relatively moderate energy barriers for structural interchange for a given cluster size were found, implying that isomerization could readily occur under ambient conditions. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Anodic oxidation of hydrazine at carbon nanotube powder microelectrode and its detection

Carbon nanotube powder microelectrodes (CNTPMEs) were used to study the anodic oxidation of hydrazine at Carbon nanotube (CNT)-the novel carbon material. It was found that the electrochemical behaviours were greatly improved at CNTs, indicating that the anodic oxidation could be catalyzed at CNTs. The kinetics parameters of this process were calculated, the heterogeneous electron transfer rate constant k was 0.0019 cm s(-1), (1-alpha)n(alpha) was 0.22. The CNTPMEs were also found with high sensitivity for hydrazine detection, could be used as hydrazine sensors.     

High-throughput protein analysis by multiplexed sodium dodecyl sulfate capillary gel electrophoresis with UV absorption detection

We have developed a novel, high-throughput approach for molecular mass determination of proteins from 14 200 to 116 000 based upon multiplexed, absorbance-based capillary electrophoresis. Via capillary multiplexing, 96 samples were analyzed simultaneously within 30 min. Detection with ultraviolet light obviates the need for protein staining or derivatization. The detection limit of the system was estimated at 5 microg/ml bovine serum albumin (BSA) when sampled from 12.5 mM Tris-HCl. The linear dynamic range was over two orders of magnitude from 5 microg/ml to 1000 microg/ml for BSA. Better than 5% sizing accuracy for protein molecular mass determination and excellent run-to-run and day-to-day reproducibility was obtainable with the described method.     

STUDY OF Cu-Mu CATALYST FOR THE SYNTHESIS OF METHYL FORMATE AND METHANOL FROM SYNTHESIS GAS

将一种新型的ＣｕＭｎ催化剂用于由合成气合成甲酸甲酯和甲醇，该催化剂表现出良好的反应活性和甲酸甲酯选择性。考察了反应温度、合成气压力及催化剂制备方法等对合成甲酸甲酯和甲醇的反应活性及选择性的影响。在反应条件下，产物收率最高达６０．１０ｇ／（Ｌ·ｈ），产物甲酸甲酯的选择性很高。用ＢＥＴ、ＸＲＤ及ＸＰＳＡｕｇｅｒ等测试方法对催化剂的比表面、晶相组成以及铜、锰在催化剂中的价态进行了表征，并探讨了催化剂失活的原因。     

Low-temperature growth and photoluminescence property of ZnS nanoribbons

At a low temperature of 450 degrees C, ZnS nanoribbons have been synthesized on Si and KCl substrates by a simple chemical vapor deposition (CVD) method with a two-temperature-zone furnace. Zinc and sulfur powders are used as sources in the different temperature zones. X-ray diffraction (XRD), selected area electron diffraction (SEAD), and transmission electron microscopy (TEM) analysis show that the ZnS nanoribbons are the wurtzite structure, and there are two types-single-crystal and bicrystal nanoribbons. Photoluminescence (PL) spectrum shows that the spectrum mainly includes two parts: a purple emission band centering at about 390 nm and a blue emission band centering at about 445 nm with a weak green shoulder around 510 nm.