CO-laser photoacoustic detection of phosgene (COCl2)

Detection of COCl₂, a highly toxic gas in chemical industry, using laser photoacoustic spectroscopy is presented. The spectrophone system used has a broad band LN₂ cooled CW CO laser as a source of radiation, which operates from 4.8–8.4 um in the mid-infrared. Using an extracavity open longitudinal resonant cell, absorption signals to about 30 CO laser lines in the 5.45 um region could be observed. detection sensitivity has been estimated to be ppb order.This work has been supported by the NSFC     

Lattice Boltzmann Model for the Incompressible Navier–Stokes Equation

In this paper a lattice Boltzmann (LB) model to simulate incompressible flow is developed. The main idea is to explicitly eliminate the terms of o(M ²), where M is the Mach number, due to the density fluctuation in the existing LB models. In the proposed incompressible LB model, the pressure p instead of the mass density ρ is the independent dynamic variable. The incompressible Navier–Stokes equations are derived from the incompressible LB model via Chapman–Enskog procedure. Numerical results of simulations of the plane Poiseuille flow driven either by pressure gradient or a fixed velocity profile at entrance as well as of the 2D Womersley flow are presented. The numerical results are found to be in excellent agreement with theory.     

低功率激光对细胞质膜通透性及细胞功能的影响

目的:探索低功率激光对细胞质膜通透性及细胞功能的影响。方法:以波长为632.8nm,功率密度为5.4mW/cm~2的氦氖激光照射人外周血淋巴细胞15、30、60分钟,并采用钙荧光指示剂Fura—2/Am定量测试法检测淋巴细胞内游离钙浓度和质膜Ca~(2+)—Mg~(2+)—ATP酶活性变化。结果:照射后淋巴细胞内游离钙浓度明显低于正常(P<0.05);同时细胞膜Ca~(2+)—Mg~(2+)—ATP酶活性增加(P<0.05);而且照射后细胞内游离钙浓度降低与质膜上Ca~(2+)—Mg~(2+)—ATP酶的激活呈负相关。结论:低功率激光照射激活细胞膜Ca~(2+)—Mg~(2+)—ATP酶活性,使细胞膜对钙通透性发生变化,且影响到细胞内Ca~(2+)贮存,造成细胞膜通透性和细胞功能的改变。     

Combinatorial computational chemistry approach of tight-binding quantum chemical molecular dynamics method to the design of the automotive catalysts

Recently, we have developed a new tight-binding quantum chemical molecular dynamics program “Colors” for combinatorial computational chemistry approach. This methodology is based on our original tight-binding approximation and realized over 5000 times acceleration compared to the conventional first-principles molecular dynamics method. In the present study, we applied our new program to the simulations on various realistic large-scale models of the automotive three-way catalysts, ultrafine Pt particle/CeO₂(111) support. Significant electron transfer from the Pt particle to the CeO₂(111) surface was observed and it was found to strongly depend on the size of the Pt particle. Furthermore, our simulation results suggest that the reduction of the Ce atom due to the electron transfer from the Pt particle to the CeO₂ surface is a main reason for the strong interaction of the Pt particle and CeO₂(111) support.     

动基座自校零压电陀螺

研制的一种压电陀螺能在动基座条件下自动消除由于温度和时间变化造成的零位漂移。典型的产品可使零位变化小于０．０５°／ｓ。零位的温度系数小于０．０００５°／ｓ／℃。     

隧穿问题的数值算法

本文给出一种新的数值方法，用以计算隧道效应中的透射系数和相移。这个方法适用于任意形状的势垒，不仅可以计算透射系数，还可以计算透射波和反射波的相位。分析表明该方法具有很高的精度。     

Validation of 3-D curved objects: CAD model and fabricatedworkpiece

This paper proposes a new method to describe and identify a 3-D curved object for the purpose of validating a fabricated object to the design specification. Curved 3-D objects are, in general, difficult to represent and identify because they lack distinct properties such as edges, planes, or cylindrical surfaces which are the building blocks in representing objects. In this paper, the authors propose to use principal axes of a 3-D object to establish a reference for the representation. A method of obtaining an inertia matrix from a 3-D range image is developed. The unique set of principal axes is obtained from the inertia matrix of an object with an arbitrary 3-D position and orientation, and the object can be described uniquely on these principal axes. On the principal axes, an object is described by a set of features describing the shape of the object such as spine, section size, section orientation, and section contraction. The features are used for comparing two objects for the validation purpose. The authors also propose a direct measure of similarity between two objects as a mean-squared difference of radii. As an experiment, two 3-D object models are designed through a CAD package, and fabricated objects are compared with the designed models for validation purposes     

正负系数中立型差分方程的正解的存在性

In this paper the sufficient conditions for the existence of positive solutions of the neutral difference equations with positive and negative coefficients are established. The results improve some known conclusions in the literature     

基于矩的异分辨率图象边界检测

（１）本文引入仿射变换，提出了一种用矩算子以民分辨率图象直接进行边界检测的方法，利用同分辨率图象正方形窗口的模板行矩的计算，推导出了相应用的边界参数公式。（２）本文提出一种隐线笥插值矩计算方法，得到一组与正方形窗口对应的正方形模板，避免了费时的预插值过程，（３）对本文提出的方法进行了实验验证，并给出了实验结果。     

C~k连续的保形分段2k次多项式插值

1．引言在每个子区间上，通过插入至多一个内结点，Brodlie和Butt［1］给出了分段三次多项式保形插值算法，Randal［2］等讨论了分段五次多项式插值，作者［31讨论了一般分段奇次多项式的保形插值，并且给1了内结点的位置范围公式．这种插值方法完全解决了一般的分段奇次多项式的保形插值问题．关于分段偶次多项式的保形插值，大多数文献只讨论分段二次保形插值，这里要特别指出的是Shumake［4j导出了二次样条保凸的充要条件，并且给出了一个二次样条保形插值的方法．在每一个子区间上至多插入一个内结点，则一个二次插值样条就可得到．作…