A New Family of Proton‐Conducting Electrolytes for Reversible Solid Oxide Cells: BaHfxCe0.8−xY0.1Yb0.1O3−δ

Reversible solid oxide cells based on ceramic proton conductors have potential to be the most efficient system for large‐scale energy storage. The performance and long‐term durability of these systems, however, are often limited by the ionic conductivity or stability of the proton‐conducting electrolyte. Here new family of solid oxide electrolytes, BaHf_xCe_0.8?xY_0.1Yb_0.1O_3?δ (BHCYYb), which demonstrate a superior ionic conductivity to stability trade‐off than the state‐of‐the‐art proton conductors, BaZr_xCe_0.8?xY_0.1Yb_0.1O_3?δ (BZCYYb), at similar Zr/Hf concentrations, as confirmed by thermogravimetric analysis, Raman, and X‐ray diffraction analysis of samples over 500 h of testing are reported. The increase in performance is revealed through thermodynamic arguments and first‐principle calculations. In addition, lab scale full cells are fabricated, demonstrating high peak power densities of 1.1, 1.4, and 1.6 W cm^?2 at 600, 650, and 700 °C, respectively. Round‐trip efficiencies for steam electrolysis at 1 A cm^?2 are 78%, 72%, and 62% at 700, 650, and 600 °C, respectively. Finally, CO₂? H₂O electrolysis is carried out for over 700 h with no degradation.     

Tuning the Molecular Weight of the Electron Accepting Polymer in All‐Polymer Solar Cells: Impact on Morphology and Charge Generation

Molecular weight is an important factor determining the morphology and performance of all‐polymer solar cells. Through the application of direct arylation polycondention, a series of batches of a fluorinated naphthalene diimide‐based acceptor polymer are prepared with molecular weight varying from M_n = 20 to 167 kDa. Used in conjunction with a common low bandgap donor polymer, the effect of acceptor molecular weight on solar cell performance, morphology, charge generation, and transport is explored. Increasing the molecular weight of the acceptor from M_n = 20 to 87 kDa is found to increase cell efficiency from 2.3% to 5.4% due to improved charge separation and transport. Further increasing the molecular weight to M_n = 167 kDa however is found to produce a drop in performance to 3% due to liquid–liquid phase separation which produces coarse domains, poor charge generation, and collection. In addition to device studies, a systematic investigation of the microstructure and photophysics of this system is presented using a combination of transmission electron microscopy, grazing‐incidence wide‐angle X‐ray scattering, near‐edge X‐ray absorption fine‐structure spectroscopy, photoluminescence quenching, and transient absorption spectroscopy to provide a comprehensive understanding of the interplay between morphology, photophysics, and photovoltaic performance.     

Gene delivery by electroporation after dielectrophoretic positioning of cells in a non-uniform electric field

We report the use of dielectrophoresis (DEP) to position U-937 monocytes within a non-uniform electric field, prior to electroporation (EP) for gene delivery. DEP positioning and EP pulsing were both accomplished using a common set of inert planar electrodes, micro-fabricated on a glass substrate. A single-shell model of the cell's dielectric properties and finite-element modeling of the electric field distribution permitted us to predict the major features of cell positioning. The extent to which electric pulses increased the permeability of the cell membranes to fluorescent molecules and to pEGFPLuc DNA plasmids were found to depend on prior positioning. For a given set of pulse parameters, EP was either irreversible (resulting in cytolysis), reversible (leading to gene delivery), or not detectable, depending on where cells were positioned. Our results clearly demonstrate that position-dependent EP of cells in a non-uniform electric field can be controlled by DEP.     

Observation and calculation of the Cs2 2 3Delta(1g) and b 3Pi(0u) states

The Cs(2) 2 (3)Delta(1g) and b (3)Pi(0u) states have been observed by infrared-infrared double resonance spectroscopy for the first time. 221 2 (3)Delta(1g)<--A (1)Sigma(u) (+)<--X (1)Sigma(g) (+) double resonance lines have been assigned to transitions into the 2 (3)Delta(1g) v=6-13 vibrational levels. Resolved fluorescence into the b (3)Pi(0u) v(')=0-48 levels has been recorded. Molecular constants and potential energy curves are determined by the global fit of the entire set of the experimental data. Theoretical potential energy curves of the 2 (3)Delta(g) and b (3)Pi(u) states have been determined in the framework of the pseudopotential method and are compared with the experimental results.     

Tunable Electrochemical Peptide Modifications: Unlocking New Levels of Orthogonality for Side-Chain Functionalization

Electrochemical transformations provide enticing opportunities for programmable, residue-specific peptide modifications. Herein, we harness the potential of amidic side-chains as underutilized handles for late-stage modification through the development of an electroauxiliary-assisted oxidation of glutamine residues within unprotected peptides. Glutamine building blocks bearing electroactive side-chain N,S-acetals are incorporated into peptides using standard Fmoc-SPPS. Anodic oxidation of the electroauxiliary in the presence of diverse alcohol nucleophiles enables the installation of high-value N,O-acetal functionalities. Proof-of-principle for an electrochemical peptide stapling protocol, as well as the functionalization of dynorphin B, an endogenous opioid peptide, demonstrates the applicability of the method to intricate peptide systems. Finally, the site-selective and tunable electrochemical modification of a peptide bearing two discretely oxidizable sites is achieved.     

Structure-activity relationships in cholapod anion carriers: enhanced transmembrane chloride transport through substituent tuning

Chloride transport by a series of steroid-based "cholapod" receptors/carriers was studied in vesicles. The principal method involved preincorporation of the cholapods in the vesicle membranes, and the use of lucigenin fluorescence quenching to detect inward-transported Cl-. The results showed a partial correlation between anion affinity and transport activity, in that changes at the steroidal 7 and 12 positions affected both properties in concert. However, changes at the steroidal 3-position yielded irregular effects. Among the new steroids investigated the bis-p-nitrophenylthiourea 3 showed unprecedented activity, giving measurable transport through membranes with a transporter/lipid ratio of 1:250 000 (an average of <2 transporter molecules per vesicle). Increasing transporter lipophilicity had no effect, and positively charged steroids had low activity. The p-nitrophenyl monourea 25 showed modest but significant activity. Measurements using a second method, requiring the addition of transporters to preformed vesicle suspensions, implied that transporter delivery was problematic in some cases. A series of measurements employing membranes of different thicknesses provided further evidence that the cholapods act as mobile anion carriers.     

Hydrogen adsorption in a highly stable porous rare-earth metal-organic framework: sorption properties and neutron diffraction studies

A highly stable porous lanthanide metal-organic framework, Y(BTC)(H2O).4.3H2O (BTC = 1,3,5-benzenetricarboxylate), with pore size of 5.8 A has been constructed and investigated for hydrogen storage. Gas sorption measurements show that this porous MOF exhibits highly selective sorption behaviors of hydrogen over nitrogen gas molecules and can take up hydrogen of about 2.1 wt % at 77 K and 10 bar. Difference Fourier analysis of neutron powder diffraction data revealed four distinct D2 sites that are progressively filled within the nanoporous framework. Interestingly, the strongest adsorption sites identified are associated with the aromatic organic linkers rather than the open metal sites, as occurred in previously reported MOFs. Our results provide for the first time direct structural evidence demonstrating that optimal pore size (around 6 A, twice the kinetic diameter of hydrogen) strengthens the interactions between H2 molecules and pore walls and increases the heat of adsorption, which thus allows for enhancing hydrogen adsorption from the interaction between hydrogen molecules with the pore walls rather than with the normally stronger adsorption sites (the open metal sites) within the framework. At high concentration H2 loadings (5.5 H2 molecules (3.7 wt %) per Y(BTC) formula), H2 molecules form highly symmetric novel nanoclusters with relatively short H2-H2 distances compared to solid H2. These observations are important and hold the key to optimizing this new class of rare metal-organic framework (RMOF) materials for practical hydrogen storage applications.     

Real-time monitoring of powder mixing in a convective blender using non-invasive reflectance NIR spectrometry

A convective blender based on a scaled down version of a high shear mixer-granulator was used to produce binary mixtures of microcrystalline cellulose (Avicel) and aspirin, citric acid, aspartame or povidone. Spectra of stationary Avicel or aspirin powder provided an indication of the information depth achieved with the NIR spectrometer used in the study, and confirmed previously reported effects of particle size and wavenumber. However, it was demonstrated that for 10% w/w aspirin in Avicel, the information depth at the C-H second overtone of aspirin (about 2.4 mm) was unaffected by changes in the particle size of aspirin and was determined by the major component. By making non-invasive NIR measurements as powders were mixed, it was possible to illustrate differences in the mixing characteristics of aspirin, citric acid, aspartame or povidone with Avicel, which were related to differences in the cohesive properties of the particles. Mixing profiles based on second overtone signals were better for quantitative analysis than those derived from first overtone measurements. It was also demonstrated that the peak-to-peak noise of the mixing profile obtained from the second overtone of aspirin changed linearly with the particle size of aspirin added to Avicel. Hence, measurement of the mixing profile in real time with NIR spectrometry provided simultaneously the opportunity to study the dynamics of powder mixing, make quantitative measurements and monitor possible changes in particle size during blending.     

Solvent Dependency of Catalyst-Substrate Aggregation Through π-π Stacking in Photoredox Catalysis

Assemblies of photoredox catalysts and their target substrates prior to photoexcitation is a phenomenon naïvely overlooked by the majority of synthetic chemists, but can have profound influences on reactivity and selectivity in photocatalytic reactions. In this study, we determine the aggregation states of triarylamine radical cationic photocatalysts with various target arene substrates in different solvents by specifically parameterized polarizable molecular dynamics simulations. A π-stacking interaction previously implicated by more expensive, less-representative quantum calculations is confirmed. Critically, this study presents new insights on: i) the ability of solvents (MeCN vs DMF) to make or break a photocatalytic reaction by promoting (MeCN) or demoting (DMF) its catalyst-substrate assemblies, which is a determining factor for reactivity, ii) the average “lifetimes” of assemblies in solution from a dynamic simulation. We find that both in the ground state and the photoexcited state, the cationic radical assemblies remain intact for periods often higher than 60 ps, rendering them ideally suitable to undergo intra-assembly electron transfer reactions upon photoexcitation. Such aspects have not addressed by previous studies on synthetic photocatalytic reactions involving non-covalent assemblies.