Development of a stereoselective Ugi reaction starting from an oxanorbornene β-amino acid derivative

We have synthesised a novel oxanorbornene β-aminoacid derivative and employed it in a stereoselective Ugi reaction. Hypothesis regarding the mechanism taking place during the reaction have been made and validated through the determination of the relative and absolute configuration of the Ugi adducts. Use of the correct choice of solvents can increase stereoselection. The resulting bicyclic peptidomimetics can be used as a novel class of pluripotent substrates to be elaborated according to the synthetic strategies previously elaborated in our laboratories.     

Epoxide Opening versus Silica Condensation during Sol–Gel Hybrid Biomaterial Synthesis

Hybrid organic–inorganic solids represent an important class of engineering materials, usually prepared by sol–gel processes by cross‐reaction between organic and inorganic precursors. The choice of the two components and control of the reaction conditions (especially pH value) allow the synthesis of hybrid materials with novel properties and functionalities. 3‐Glycidoxypropyltrimethoxysilane (GPTMS) is one of the most commonly used organic silanes for hybrid‐material fabrication. Herein, the reactivity of GPTMS in water at different pH values (pH 2–11) was deeply investigated for the first time by solution‐state multinuclear NMR spectroscopic and mass spectrometric analysis. The extent of the different and competing reactions that take place as a function of the pH value was elucidated. The NMR spectroscopic and mass spectrometric data clearly indicate that the pH value determines the kinetics of epoxide hydrolysis versus silicon condensation. Under slighly acidic conditions, the epoxy‐ring hydrolysis is kinetically more favourable than the formation of the silica network. In contrast, under basic conditions, silicon condensation is the main reaction that takes place. Full characterisation of the formed intermediates was carried out by using NMR spectroscopic and mass spectrometric analysis. These results indicate that strict control of the pH values allows tuning of the reactivity of the organic and inorganic moities, thus laying the foundations for the design and synthesis of sol–gel hybrid biomaterials with tuneable properties.     

Acid–Base‐Controlled Stereoselective Metalation of Overhanging Carboxylic Acid Porphyrins: Consequences for the Formation of Heterobimetallic Complexes

Overhanging carboxylic acid porphyrins have revealed promising ditopic ligands offering a new entry in the field of supramolecular coordination chemistry of porphyrinoids. Notably, the adjunction of a so‐called hanging‐atop (HAT) Pb^II cation to regular Pb^II porphyrin complexes allowed a stereoselective incorporation of the N‐core bound cation, and an allosterically controlled Newton’s cradle‐like motion of the two Pb^II ions also emerged from such bimetallic complexes. In this contribution, we have extended this work to other ligands and metal ions, aiming at understanding the parameters that control the HAT Pb^II coordination. The nature of the N‐core bound metal ion (Zn^II, Cd^II), the influence of the deprotonation state of the overhanging COOH group and the presence of a neutral ligand on the opposite side (exogenous or intramolecular), have been examined through ¹H NMR spectroscopic experiments with the help of radiocrystallographic structures and DFT calculations. Single and bis‐strap ligands have been considered. They all incorporate a COOH group hung over the N‐core on one side. For the bis‐strap ligands, either an ester or an amide group has been introduced on the other side. In the presence of a base, the mononuclear Zn^II or Cd^II complexes incorporate the carbonyl of the overhanging carboxylate as apical ligand, decreasing its availability for the binding of a HAT Pb^II. An allosteric effector (e.g., 4‐dimethylaminopyridine (DMAP), in the case of a single‐strap ligand) or an intramolecular ligand (e.g., an amide group), strong enough to compete with the carbonyl of the hung COO^?, is required to switch the N‐core bound cation to the opposite side with concomitant release of the COO^?, thereby allowing HAT Pb^II complexation. In the absence of a base, Zn^II or Cd^II binds preferentially the carbonyl of the intramolecular ester or amide groups in apical position rather than that of the COOH. This better preorganization, with the overhanging COOH fully available, is responsible for a stronger binding of the HAT Pb^II. Thus, either allosteric or acid–base control is achieved through stereoselective metalation of Zn^II or Cd^II. In the latter case, according to the deprotonation state of the COOH group, the best electron‐donating ligand is located on one or the other side of the porphyrin (COO^?>CONHR>COOR>COOH): the lower affinity of COOH for Zn^II and Cd^II, the higher for a HAT Pb^II. These insights provide new opportunities for the elaboration of innovative bimetallic molecular switches.     

Quantitative analysis of complex amino acids and RGD peptides by X‐ray photoelectron spectroscopy (XPS)

The C 1 s, N 1 s, and O 1 s core level binding energies (BEs) of the functional groups in amino acids (glycine, aspartic acid, glutamic acid, arginine, and histidine) with varied side‐chains and cell‐binding RGD‐based peptides have been determined and characterized by X‐ray photoelectron spectroscopy with a monochromatic Al K_α source. The zwitterionic nature of the amino acids in the solid state is unequivocally evident from the N 1 s signals of the protonated amine groups and the C 1 s signature of carboxylate groups. Significant adventitious carbon contamination is evident for all samples but can be quantitatively accounted for. No intrinsic differences in the XP spectra are evident between two polymorphs (α and γ) of glycine, indicating that the crystallographic differences have a minor influence on the core level BEs for this system. The two nitrogen centers in the imidazole group of histidine exhibit an N 1 s BE shift that is in line with previously reported data for theophylline and aqueous imidazole solutions, while the nitrogen and carbon chemical shifts reflect the unusual guanidinium chemical environment in arginine. It is shown that the complex envelopes of C 1 s and O 1 s photoemission spectra for short‐chain peptides can be analyzed quantitatively by reference to the less complex XP spectra of the constituent amino acids, provided the peptides are of high enough purity. The distinctive N 1 s photoemission from the amide linkages provides an indicator of peptide formation even in the presence of common impurities, and variations in the relative intensities of N 1 s were found to be diagnostic for each of the three peptides investigated (RGD, RGDS, and RGDSC). Copyright © 2013 John Wiley & Sons, Ltd.     

New Aspects of Polymers Containing Quaternary Ammonium Groups

It was established that linear polymers with quaternary ammonium groups are obtained by the reaction of chloromethylated polystyrene (CMPS) with hydroxyalkylic tertiary amines when the amines contain one or two hydroxyl groups, and that crosslinked polymers are obtained with aminoether groups when the amines have three hydroxyl groups, i.e., tris(2-hydroxyethy1)amine. The aminoether units appear by intramolecular rearrangement of quaternary ammonium structural units. Kinetic studies on the synthesis of polymers with quaternary ammonium groups from CMPS, poly(N,N-dimethylamino-ethylmethacrylate), and poly(N,N-dimethylaminopropylacrylamide), were performed. The main factors which influence the kinetics of reactions are steric hindrance of near neighboring groups, hydrophilic effect for hydroxyalkylamines and polymer-solvent interaction.     

Stabilization of the Triphosphallyl Ligand η3‐P3{P(O)H} at Iridium via Alkaline Activation of P4

The selective functionalization of the polyphosphorus moiety Ph₂PCH₂PPh₂PPPP present as a tetrahapto‐ligand in complex [Ir(dppm)(Ph₂PCH₂PPh₂PPPP)]⁺ ( 1 , dppm=Ph₂PCH₂PPh₂) was obtained by reaction of 1 with water under basic conditions at room temperature. The formation of the new triphosphaallyl moiety η³‐P₃{P(O)H} was determined in solution by NMR spectroscopy, and confirmed in the solid state by a single‐crystal X‐ray structure of the stable product [Ir(κ²‐dppm)(κ¹‐dppm)(η³‐P₃{P(O)H})] ( 2 ). In solution, 2 has a fluxional behavior attributable to the four P atoms belonging to the tetraphosphorus moiety in 1 and exhibits a chemical exchange process involving the two PPh₂ moieties of the same bidentate ligand, as determined by 1D and 2D NMR spectroscopy experiments carried out at variable temperature. The mechanism of the reaction was investigated at the DFT level, which suggested a selective attack of an in‐situ generated OH^? anion on one of the non‐coordinated phosphorus atoms of the P₄ moiety. The reaction then evolves through an acid‐assisted tautomerization, which leads to the final compound 2 . Bonding analysis pointed out that the new unsubstituted P₃‐unit in the η³‐P₃{P(O)H} moiety behaves as a triphosphallyl ligand.     

Screening for exogenous androgen anabolic steroids in human hair by liquid chromatography/orbitrap-high resolution mass spectrometry

A method for the screening of various anabolic steroids and their esters in human hair, based on liquid-chromatography–high resolution mass spectrometry using an Exactive benchtop Orbitrap mass spectrometer, has been set up and validated. This method involved methanolic incubation of 30 mg of hair and analysis of the relevant extract in HPLC using a C18 column. The mass detector, with nominal resolving power of 100,000, operated in full scan mode in APCI under positive ionization mode. Analytes were identified by exact mass, correspondence of isotopic cluster and retention times.     

Surfactant Hydrogels for the Dispersion of Carbon‐Nanotube‐Based Catalysts

Novel hydrogel phases based on positively charged and zwitterionic surfactants, namely, N‐[p‐(n‐dodecyloxybenzyl)]‐N,N,N‐trimethylammonium bromide (pDOTABr) and p‐dodecyloxybenzyldimethylamine oxide (pDOAO), which combine pristine carbon nanotubes (CNTs), were obtained, thus leading to stable dispersions and enhanced cross‐linked networks. The composite hydrogel featuring a well‐defined nanostructured morphology and an overall positively charged surface was shown to efficiently immobilise a polyanionic and redox‐active tetraruthenium‐substituted polyoxometalate (Ru₄POM) by complementary charge interactions. The resulting hybrid gel has been characterised by electron microscopy techniques, whereas the electrostatic‐directed assembly has been monitored by means of fluorescence spectroscopy and ζ‐potential tests. This protocol offers a straightforward supramolecular strategy for the design of novel aqueous‐based electrocatalytic soft materials, thereby improving the processability of CNTs while tuning their interfacial decoration with multiple catalytic domains. Electrochemical evidence confirms that the activity of the catalyst is preserved within the gel media.     

Evaluation of methoxy polyethylene glycol‐polylactide diblock copolymers as additive in hypromellose film coating

This paper deals with a new application of diblock methoxy polyethylene glycol‐polylactide block copolymers, a class of synthetic biomaterials largely studied in the pharmaceutical and biomedical fields owing to their favorable properties such as biocompatibility, biodegradability, low immunogenicity, and good mechanical properties. In this work, these materials were evaluated as additives for gastro‐soluble pharmaceutical coating aimed to reduce film stiffness and water permeability. Two copolymers with different polylactide chain lengths were synthesized and characterized in term of molecular weight and solid‐state properties. A series of free films with different hypromellose/copolymers ratio were prepared and characterized in terms of appearance, components miscibility, plasticity, and water vapor permeability. The obtained results demonstrate that copolymers effectively influence hypromellose film properties according to their concentration and molecular weight. Specifically, the addition of the copolymer with a molecular weight of 6.5 kDa in a ratio hypromellose:polymer 5:1, allowed to obtain films with good appearance, improved plasticization, and water permeability properties. For higher molecular weight, copolymer or different ratios was not possible to observe the improvement of all the properties at the same time. The results also make possible to define the critical features to improve in order to use block copolymers as additive in hypromellose film coating. The availability of new water‐soluble additives able to work as plasticizer and moisture sealer in polymeric films represents an important progress not only in the field of pharmaceutical coating but also in that of food coatings, as for example in the formulation of edible films. Copyright © 2013 John Wiley & Sons, Ltd.