Synthesis of TiO2 based on hydrothermal methods using elevated pressures and microwave conditions

Titanium dioxide (TiO₂), especially in its anatase form, is an effective photocatalyst under ultraviolet (UV) light. The particle size of TiO₂ is a critical factor to determine its photoactivity based on its quantum effectiveness under light irradiations. Thus, nanocrystalline TiO₂ has been widely accepted to significantly enhance this effect. The sol–gel method is generally used to synthesize the anatase form of nanocrystalline TiO₂. In this study, we expanded the synthesis method of TiO₂ to high pressures under direct heating (hydrothermal method) and indirect heating (microwave-assisted method). It was found that pH value is one of the major factors to control nano-sizes of TiO₂ particles, and the neutral condition in all methods is preferable for controlling the sizes of the prepared TiO₂ particles. The microwave-assisted method further improves quality of synthesized nano-size TiO₂ below 10 nm. These results have been confirmed by both the direct size measurement using TEM images and indirect determination using XRD peaks. The collected samples are further analyzed using UV–Vis spectroscopy to identify the particle size-dependent photoreactivity and to confirm the effectiveness of microwave-assisting under neutral conditions. DSC is also a powerful tool to identify the crystalline transition of TiO₂.     

Rh-Catalyzed Decarbonylative Cross-Coupling between o-Carboranes and Twisted Amides: A Regioselective,Additive-Free,and Concise Late-Stage Carboranylation

The convenient cross-coupling of sp² or sp³ carbons with a specific boron vertex on carborane cage represents significant synthetic values and insurmountable challenges. In this work, we report an Rh-catalyzed reaction between o-carborane and N-acyl-glutarimides to construct various B_cage−C bonds. Under the optimized condition, the removable imine directing group (DG) leads to B(3)− or B(3,6)−C couplings, while the pyridyl DG leads to B(3,5)−Ar coupling. In particular, an unexpected rearrangement of amide reagent is observed in pyridyl directed B(4)−C(sp³) formation. This scalable protocol has many advantages, including easy access, the use of cheap and widely available coupling agents, no requirement of an external ligand, base or oxidant, high efficiency, and a broad substrate scope. Leveraging the Rh^I dimer and twisted amides, this method enables straightforward access to diversely substituted and therapeutically important carborane derivatives at boron site, and provides a highly valuable vista for carborane-based drug screening.     

Manganese(I)-Catalyzed Regioselective C−H Allenylation: Direct Access to 2-Allenylindoles

A Mn^I-catalyzed regioselective C−H allenylation is reported that allows a broad range of 2-allenylindoles to be synthesized regioselectively on a gram scale under simple conditions. Notably, a highly efficient chirality transfer was observed (up to 93 % ee) in this transformation. This procedure was further found to allow, for the first time, the direct preparation of ketones by Mn^I-catalyzed C−H activation. Mechanistic investigations revealed that the precoordination of the oxygen atom to the manganese center as well as the congested tertiary carbon atom in the propargylic carbonates play a crucial role.     

Mo2C/Reduced Graphene Oxide Composites with Enhanced Electrocatalytic Activity and Biocompatibility for Microbial Fuel Cells

A simple, cost-effective strategy was developed to effectively improve the electron transfer efficiency as well as the power output of microbial fuel cells (MFCs) by decorating the commercial carbon paper (CP) anode with an advanced Mo₂C/reduced graphene oxide (Mo₂C/RGO) composite. Benefiting from the synergistic effects of the superior electrocatalytic activity of Mo₂C, the high surface area, and prominent conductivity of RGO, the MFC equipped with this Mo₂C/RGO composite yielded a remarkable output power density of 1747±37.6 mW m⁻², which was considerably higher than that of CP-MFC (926.8±6.3 mW m⁻²). Importantly, the composite also facilitated the formation of 3D hybrid biofilm and could effectively improve the bacteria–electrode interaction. These features resulted in an enhanced coulombic efficiency up 13.2 %, nearly one order of magnitude higher than that of the CP (1.2 %).     

Design,Synthesis, and Optical/Electronic Properties of a Series of Sphere-Rod Shape Amphiphiles Based on the C60-oligofluorene Conjugates

A series of sphere-rod shape amphiphiles were designed and synthesized by connecting the rod-like oligofluorenes with different lengths(OF_n) to the different positions of the spherical [60]fullerene(C_(60)) through a rigid linkage. The conjugates were characterized by ~1H-NMR, ~(13)C-NMR, FTIR, EA and MALDI-TOF mass spectrometry. The optical and electronic properties of the conjugates were studied by UV-Vis absorption spectroscopy, fluorescence spectrometry, and cyclic voltammetry. The results from UV-Vis absorption spectroscopy and cyclic voltammetry indicated that the energy profiles of C_(60) and OF_n remained unchanged when different lengths of OF_n were attached to C_(60). The electron affinities of the OF_n-C_(60) conjugates were close to that of C_(60), while slight electronic interaction was found between the two individual chromophores(C_(60) and OF_n) in their ground states. The fluorescence spectra exhibited a complete fluorescence quenching in the toluene solution, suggesting an effective energy transfer from OF_n to C_(60). It presents a systematic study on the selfassembly, structure-property relationship, and potential technical applications of the conjugates.     

Turbulence modelling and role of compressibility on oil spilling from a damaged double hull tank

The viscosity plays an important role, and a multiphase solver is necessary to numerically simulate the oil spilling from a damaged double hull tank (DHT). However, it is uncertain whether turbulence modelling is necessary, which turbulence model is suitable; and what the role of compressibility of the fluids is. This paper presents experimental and numerical investigations to address these issues for various cases representing different scenarios of the oil spilling, including grounding and collision. In the numerical investigations, various approaches to model the turbulence, including the large eddy simulation (LES), direct numerical simulation and the Reynolds average Navier–Stokes equation (RANS) with different turbulence models, are employed. Based on the investigations, it is suggested that the effective Reynolds numbers corresponding to both oil outflow and water inflow shall be considered when classifying the significance of the turbulence and selecting the appropriate turbulence models. This is confirmed by new lab tests considering the axial offset between the internal and the external holes on two hulls of the DHT. The investigations conclude for numerically simulating oil spilling from a damaged DHT that when the effective Re is smaller the RANS approaches should not be used and LES modelling should be employed; while when the effective Reynolds numbers is large, the RANS models may be used as they can give similar results to LES in terms of the height of the mixture in the ballast tank and discharge but costing much less CPU time. The investigation on the role of the compressibility of the fluid reveals that the compressibility of the fluid may be considerable in a small temporal‐spatial scale but plays an insignificant role on macroscopic process of the oil spilling. Copyright © 2016 John Wiley & Sons, Ltd.     

Development of an LC/MS/MS method in order to determine arctigenin in rat plasma: its application to a pharmacokinetic study

In this study, a simple and sensitive LC/MS/MS method was developed and validated for the determination of arctigenin in rat plasma. The MS detection was performed using multiple reaction monitoring at the transitions of m/z 373.2 → 137.3 for arctigenin and m/z 187.1 → 131.0 for psoralen (internal standard) with a Turbo IonSpray electrospray in positive mode. The calibration curves fitted a good linear relationship over the concentration range of 0.2–500 ng/mL. It was found that arctigenin is not stable enough at both room temperature and ?80 °C unless mixed with methanol before storage. The validated LC/MS/MS method was successfully applied for the pharmacokinetic study of arctigenin in rats. After intravenous injection of 0.3 mg/kg arctigenin injection to rats, the maximum concentration, half‐life and area under the concentration–time curve were 323 ± 65.2 ng/mL, 0.830 ± 0.166 and 81.0 ± 22.1 h ng/mL, respectively. Copyright © 2013 John Wiley & Sons, Ltd.     

Ammonia-treatment assisted fully encapsulation of Fe2O3 nanoparticles in mesoporous carbons as stable anodes for lithium ion batteries

To improve the initial coulombic efficiency and bulk density of ordered mesoporous carbons, active Fe2O3 nanoparticles were introduced into tubular mesopore channels of CMK-5 carbon, which possesses high specific surface area (>1700 m 2 g-1 ) and large pore volume (>1.8 cm 3 g-1 ). Fine Fe2O3 nanoparticles with sizes in the range of 5 7 nm were highly and homogenously encapsulated into CMK-5 matrix through ammonia-treatment and subsequent pyrolysis method. The Fe2O3 loading was carefully tailored and designed to warrant a high Fe2O3 content and adequate buffer space for improving the electrochemical performance. In particular, such Fe2O3 and mesoporous carbon composite with 47 wt% loading exhibits a considerably stable cycle performance (683 mAh g-1 after 100 cycles, 99% capacity retention against that of the second cycle) as well as good rate capability. The fabrication strategy can effectively solve the drawback of single material, and achieve a high-performance lithium electrode material.     

Studies on the Cationic Copolymerization of α-Pinene and Styrene with Complex SbCl3/AlCl3 Catalyst Systems. I. Effects of the Polymerization Conditions on the Copolymerization Products

Abstract

The copolymerization products of α-pinene and styrene were prepared with the compound catalyst system SbCl₃/AlCl₃ by changing the Sb/Al ratio, feeding monomer ratio, solvent, and polymerization temperature. The compositions of the copolymerization products were quantitatively characterized by the method of the combination of micro-ozonization and thin-layer chromatography in terms of the contents of the homopolymers and the copolymers containing high or low mole fractions of α-pinene, the yields of pure copolymer, and the monomer unit ratios (F ₁) of copolymers. The results show that it was easier to obtain the higher yield (up to 80%) of the pure copolymer with the complex catalyst system than with AlCl₃ alone. The F ₁ values could be controlled between 30 and 56% under the following polymerization conditions: Sb/Al  1/2, α-pinene/styrene  70%, and the conversion of styrene  90%.