A 24-GHz Patch Array with a Power Amplifier/Low-Noise Amplifier MMIC

This paper presents an active patch array designed at 24 GHz. It can be used as a front-end component for a phased array. A series resonant array structure is chosen which is compact and easy excite. With 5 elements, the array proved a 12-dB antenna gain. A power amplifier and a low noise amplifier are designed on a single GaAs chip (PALNA). Bias switch is used in the PALNA, which greatly reduces the switch loss in a transceiver and increases the efficiency. 20-dB small signal gain is achieved in both power amplifier and low noise amplifier. The active patch array is built by the combination of the patch array and PALNA. The measured active gain of this antenna is 35-dB for the PA mode and 31-dB for the LNA mode. This active patch array can obtain an EIRP of 34 dBm with a total radiated power of 22dBm and a maximum PAE of 32%. To check the noise performance, we applied sources at both normal temperature and 77K (liquid nitrogen) and extracted the noise figure (3.5 dB) of the active antenna by the Y factor method. The results proved that the active antenna is working efficiently as both a transmitting and receiving antenna.     

(NH4)2MoS4在活性炭上浸渍过程的研究:Ⅱ.干燥机理及模型

（ＮＨ＿４）＿２ＭｏＳ＿４在活性炭上浸渍过程的研究Ⅱ．干燥机理及模型秦慧芳，张成芳，陆岗，俞丰，朱子彬（华东理工大学无机化工研究所，上海２００２３７）２３７）关键词硫代钼酸铵，活性炭，干燥，钼分布，干燥模型负载型催化剂的活性组分在载体上的分布，受浸渍...     

Temperature dependence of excitonic luminescence from nanocrystalline ZnO films

The properties of the excitonic luminescence for nanocrystalline ZnO thin films are investigated by using the dependence of excitonic photoluminescence (PL) spectra on temperature. The ZnO thin films are prepared by thermal oxidation of ZnS films prepared by low-pressure metalorganic chemical vapor deposition (LP-MOCVD) technique. The X-ray diffraction (XRD) indicates that ZnO thin films have a polycrystalline hexagonal wurtzite structure with a preferred (0 0 2) orientation. A strong ultraviolet (UV) emission peak at 3.26 eV is observed, while the deep-level emission band is barely observable at room temperature. The strength of the exciton-longitudinal-optical (LO) phonon coupling is deduced from the temperature dependence of the full-width at half-maximum (FWHM) of the fundamental excitonic peak, decrease in exciton-longitudinal-optical (LO) phonon coupling strength is due to the quantum confinement effect.     

Quantum Cosmology in CGBD Theory

We apply the theory developed in quantum cosmology to a model of charged generalized Brans–Dicke gravity. This is a quantum model of gravitation interacting with a charged Brans–Dicke type scalar field which is considered in the Pauli frame. The Wheeler–DeWitt equation describing the evolution of the quantum Universe is solved in the semiclassical approximation by applying the WKB approximation. The wave function of the Universe is also obtained by applying both the Vilenkin-like and the Hartle–Hawking-like boundary conditions. We then make predictions from the wave functions and infer that the Vilenkin's boundary condition is more reasonable in the Brans–Dicke gravity models leading a large vacuum energy density at the beginning of the inflation.     

Process characterization and optimization based on censored datafrom highly fractionated experiments

Censored data resulting from life-test of durable products, coupled with complicated structures of screening experiments, makes process characterization very difficult. Existing methods can be inadequate for modeling such data because important effects and factor levels might be identified wrongly. This article presents an expectation-modeling-maximization (EMM) algorithm, where censored data are imputed as pseudo-complete samples and a forward regression is used to compare all main effects and 2-factor interactions for process characterization. Then, the best combination of controllable variables is determined in order to optimize predictions from the final model. A sensitivity study of the selected models, with changes of imputation and parameter estimation methods, shows the importance of using appropriate models and estimation methods in EMM. The author's analysis of the Specht (1985) heat-exchanger life-test data indicates that E, EG, EH in the wall data and A, K, D, DJ in the corner data are the dominating factors. However, in finding the best process recipe, one might use a model with a few additional terms, which leads to more accurate predictions for better process optimization     

A framework for characterizing disaster-based network survivability

This paper formulates a general framework that includes and extends the existing definitions for network survivability. Based on this framework, network survivability is characterized by a survivability function rather than a single-value survivability measure, and various quantities of interest can be derived from the function. Examples are the expected survivability, the worst-case survivability, the r-percentile survivability, and the probability of zero survivability. The survivability function is especially useful for the study of large-scale disasters. For illustration, the authors derive the survivability function in closed form for a simple ring network under link failures. They also discuss the general procedure for finding survivability functions for complex networks, and show that the survivability function reveals useful information about a network. This framework provides a unified and practical approach to analyzing and designing highly survivable communications networks     

Patterned uniformly orientated silicon nanocrystallite films and efficient field emission characteristics

Patterned uniformly (100)-orientated silicon nanocrystallite (SiNC) films were fabricated based on hydrogen ion implantation technique and typical electrochemical anodic etching method. The surface morphology and microstructure characteristics of the films were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and atomic force microscopy. The efficient field emission with low turn-on field of about 3.2 V/μm at current density of 0.1 μA/cm² was obtained. The emission current density from the SiNC films reached 1 mA/cm² under a bias field of about 11 V/μm. The experimental results demonstrate that the SiNC films have great potential applications for flat panel displays.     

Synthesis and characterization of novel thermoresponsive‐co‐biodegradable hydrogels composed of N‐isopropylacrylamide,poly(L‐lactic acid), and dextran

A series of novel multifunctional hydrogels that combined the merits of both thermoresponsive and biodegradable polymeric materials were designed, synthesized, and characterized. The hydrogels were copolymeric networks composed of N‐isopropylacrylamide (NIPAAM) as a thermoresponsive component, poly(L‐lactic acid) (PLLA) as a hydrolytically degradable and hydrophobic component, and dextran as an enzymatically degradable and hydrophilic component. The chemical structures of the hydrogels were characterized by an attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) technique. The hydrogels were thermoresponsive, showing a lower critical solution temperature (LCST) at approximately 32 °C, and their swelling properties strongly depended on temperature changes, the balance of the hydrophilic/hydrophobic components, and the degradation of the PLLA component. The degradation of the hydrogels caused by hydrolytic cleavage of ester bonds in the PLLA component was faster at 25 °C below the LCST than at 37 °C above the LCST, determined by the ATR–FTIR technique. Due to their multifunctional properties, the designed hydrogels show great potential for biomedical applications, including drug delivery and tissue engineering. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5054–5066, 2004     

电视节目制作中的压缩格式

电视节目制作系统中存在着几种格式的压缩问题 ,对几种压缩方式及其优缺点进行了分析。     

基于移动端多天线系统的无线衰落信道模型

根据当前无线移动通信对多天线移动接收端性能仿真的要求，讨论并建立了适于空时信号处理的移动端矢量信道模型。通过分析无线移动信道特点。研究了影响接收信号幅度相位的诸多因素，建立了相应的数学模型。并对随机参数选取进行了探讨。其中考虑到移动端接收信号到达角扩散的特点，采用GBSB椭圆模型产生了适于移动端接收信号仿真的随机角度，改进了一种瑞利衰落生成算法。最后信道的数值仿真结果符合理论和经验。同时，通过TD-SCDMA系统链路级仿真，也证明了该信道模型的有效性。