基于GIS技术的安徽省重大农业气象灾害测评系统总体设计

对《基于GIS技术的安徽省重大农业气象灾害测评系统》的总体设计方法作了概要介绍。该系统的建立主要是采用GIS技术，综合气候分析、遥感监测、地理环境影响评判等方法，提高对安徽省干旱、洪涝、低温冻害等重大农业气象灾害实时监测、趋势预测，以及对农业生产影响的分析评价结果的准确性。     

高精度CCD尺寸自动检测系统的光学系统设计

介绍测量精度为±０．００３ｍｍ的ＣＣＤ尺寸检测系统的光学系统设计特点及远心物镜设计原理，并给出了测试结果。     

Mobility modeling, location tracking, and trajectory prediction inwireless ATM networks

Wireless ATM networks require efficient mobility management to cope with frequent mobile handoff and rerouting of connections. Although much attention has been given in the literature to network architecture design to support wide-area mobility in public ATM networks, little has been done to the important issue of user mobility estimation and prediction to improve the connection reliability and bandwidth efficiency of the underlying system architecture. This paper treats the problem by developing a hierarchical user mobility model that closely represents the movement behavior of a mobile user, and that, when used with appropriate pattern matching and Kalman filtering techniques, yields an accurate location prediction algorithm, HLP, or hierarchical location prediction, which provides necessary information for advance resource reservation and advance optimal route establishment in wireless ATM networks     

A maximum torque control with a controlled capacitor for asingle-phase induction motor

This paper presents a new method to achieve a maximum torque for a single-phase induction motor. An AC adjustable capacitor using an electronic switch in parallel with a capacitor is proposed. The capacitor is short-circuited in a different period by an electronic switch during each cycle to vary the effective value of the AC capacitor. Two new optimization algorithms, which obtain a maximum starting torque by adjusting the effective capacitor, are proposed. No starting capacitor or centrifugal switch is used here. A theoretical analysis, and simulated and experimental results are presented in this paper     

上下行信号平衡与蜂窝小区设计

本文从无线电通信基本要素出发 ,阐述上行信号和下行信号的无线传播 ,得出上下行信号平衡链路方程 ,并以我国普遍使用的TACS系统和GSM系统为例 ,着重讨论了信号平衡与蜂窝小区设计之间的关系。     

The effects of plasma etching induced gate oxide degradation onMOSFET's 1/f noise

The effects of the plasma etching process induced gate oxide damages on device's low frequency noise behavior are investigated on MOSFET's fabricated with different field plate perimeter to gate area ratio antennas. Abnormal 1/f noise spectrum with a shoulder centered in the frequency range of 100 and to 1 kHz was frequently observed in small geometry devices, and it is attributable to a nonuniform distribution of oxide traps induced by plasma etching process     

锥形有源条半导体光放大器增益和饱和特性分析

以行波半导体光放大器速度方程为基础，采用传输矩阵方法，对锥形结构半导体光放大器的增益和饱和特性进行理论研究。讨论了不同锥形长度，不同结构时的增益和饱和特性差异。理论研究表明，锥形结构能改善半导体光放大器的偏振灵敏度。在同一锥度下，长锥形长度能提高饱和增益，降低偏振度。在进行半导体光放大器有源条结构设计时要综合考虑锥度及锥形长度的影响，以实现结构优化 。     

激光激活化学反应分离同位素反应池参数确定及其影响

在气体分子运动论、碰撞理论、流体力学和光化学反应、热化学反应及高斯光束理论基础上建立了位于激光器腔内外的反应池的设计尺寸同各相关参量和同位素产物产率、同位素分离系数间的关系，并给出了一些计算结果。     

COIL中BHP浓度对发生O_2(~1△)的影响

本文实验研究了BHP的浓度对产生O2（1△）的影响。实验结果表明：当BHP浓度大于3.5M时，Cl2利用率以及O2（1△）的产率将不依赖于BHP浓度的变化而变化，同时，实验结果表明，使用低浓度的BHP对COIL的操作是可行的。