Liquid–paper interactions during liquid drop impact and recoil on paper surfaces

The spreading and recoiling of water drops on several flat and macroscopically smooth model surfaces and on sized paper surfaces were studied over a range of drop impaction velocities using a high-speed CCD camera. The water drop spreading and recoiling results on several model hydrophobic and hydrophilic surfaces were found to be in agreement with observations reported in the literature. The maximum drop spreading diameter for those model surfaces at impact was found to be dependent upon the initial drop kinetic energy and the degree of hydrophobicity/hydrophilicity of the surface. The extent of the maximum drop recoiling was found to be much weaker for hydrophilic substrates than for hydrophobic substrates. Sized papers, however, showed an interesting switch of behaviour in the process of water drop impaction. They behave like a hydrophobic substrate when a water drop impacts on it, but like a hydrophilic substrate when water drop recoils. Although the contact angle between water and hydrophilic or hydrophobic non-porous surfaces changes from advancing to receding as reported in literature, the change of contact angle during water impact on paper surface is unique in that the level of sizing was found to have a smaller than expected influence on the degree of recoil. Atomic force microscopy (AFM) was used to probe fibres on a sized filter paper surface under water. The AFM data showed that water interacted strongly with the fibre even though the paper was heavily sized. Implications of this phenomenon were discussed in the context of inkjet print quality and of the surface conditions of sized papers. Results of this study are very useful in the understanding of inkjet ink droplet impaction on paper surfaces which sets the initial condition for ink penetration into paper after impaction.     

Synthesis, crystal structure and magnetic property of a new nickel selenite chloride: Ni5(SeO3)4Cl2

The new nickel selenite chloride, Ni₅(SeO₃)₄Cl₂, was obtained by high-temperature solid state reaction of NiCl₂, Ni₂O₃ and SeO₂ in a 1:2:4 molar ratio at 700 °C in an evacuated quartz tube. Its structure was established by single-crystal X-ray diffraction. Ni₅(SeO₃)₄Cl₂ crystallizes in the triclinic system, space group P-1 (No. 2) with cell parameters of a=8.076(2), b=9.288(2), c=9.376(2) Å, α=101.97(3), β=105.60(3), γ=91.83(3)° and Z=2. All nickel(II) ions in Ni₅(SeO₃)₄Cl₂ are octahedrally coordinated by selenite oxygens or/and chloride anions (([Ni(1)O₅Cl], [Ni(2)O₄Cl₂], [Ni(3)O₅Cl], [Ni(4)O₆] and [Ni(5)O₄Cl]). The structure of the title compound features a condensed three-dimensional (3D) network built by Ni(II) ions interconnected by SeO₃²⁻ anions as well as Cl⁻ anions. Magnetic property measurements show strong antiferromagnetic interaction between nickel(II) ions.     

Anomalies and curvature ofW manifolds

We study the holomorphic structure of certain complex manifolds associated withW algebras, namely, the flag manifoldsW /T andW ₁₊/T ₁₊, and the spacesW /SL(),R) andW ₁₊/GL(,R), whereT andT ₁₊ are the maximal tori inW andW ₁₊. We compute their Ricci curvature and show how the results are related to the anomaly-freedom conditions forW andW ₁₊. We discuss the relation of these manifolds with extensions of universal Teichmüller space.Supported in part by the U.S. Department of Energy, under grant DE-AS05-81ER40039Supported in part by the U.S. Department of Energy, under grant DE-FG03-84ER40168     

On error estimates of some higher order projection and penalty-projection methods for Navier-Stokes equations

Summary This paper is a continuation of our previous work [10] on projection methods. We study first existing higher order projection schemes in the semidiscretized form for the Navier-Stokes equations. One error analysis suggests that the precision of these schemes is most likely plagued by the inconsistent Neumann boundary condition satisfied by the pressure approximations. We then propose a penalty-projection scheme for which we obtain improved error estimates.This work is partially supported by NSF grant MS-8802596.     

A donor–acceptor complex enables the synthesis of E-olefins from alcohols,amines and carboxylic acids

Olefins are prevalent substrates and functionalities. The synthesis of olefins from readily available starting materials such as alcohols, amines and carboxylic acids is of great significance to address the sustainability concerns in organic synthesis. Metallaphotoredox-catalyzed defunctionalizations were reported to achieve such transformations under mild conditions. However, all these valuable strategies require a transition metal catalyst, a ligand or an expensive photocatalyst, with the challenges of controlling the region- and stereoselectivities remaining. Herein, we present a fundamentally distinct strategy enabled by electron donor–acceptor (EDA) complexes, for the selective synthesis of olefins from these simple and easily available starting materials. The conversions took place via photoactivation of the EDA complexes of the activated substrates with alkali salts, followed by hydrogen atom elimination from in situ generated alkyl radicals. This method is operationally simple and straightforward and free of photocatalysts and transition-metals, and shows high regio- and stereoselectivities.

A visible-light-induced defunctionalization strategy for the synthesis of olefins by using easily available alcohols, amines and carboxylic acids as starting materials is demonstrated.     

无机元素与计量学模型结合的半夏产地溯源研究

目的:建立不同产地半夏无机元素的分析方法和溯源体系,为半夏药材的质量控制和道地性评价提供技术支持。方法:采用电感耦合等离子体质谱法(ICP-MS)和电感耦合等离子体原子发射光谱法(ICP-AES)对我国6个主产区72份半夏样品中K、Ca、Na、Mg、Al等37种无机元素的含量进行测定,并采用方差分析、主成分分析、因子分析等计量学方法进行统计与评价。通过对比BP-神经网络算法、K-最近邻算法、最小二乘支持向量机等多种模式识别方法,探索适合半夏产地溯源的最佳模型。结果:不同产地半夏中无机元素的构成各具特征,各无机元素含量在产地间差异显著(P＜0.05),其中La、Pb、As、Na、Bi、Hg、Sn、Cd、Ag 9种元素在不同产区间的差异最为明显;3D-plots图显示不同产地半夏样品分布相对集中,具备产地分类的可行性;KNN分类模型(曼哈顿距离)是半夏产地溯源的最佳方法,测试集的正确率达到100%。结论:无机元素分析技术结合适当的计量学模型可以实现半夏的产地溯源。     

Towards the rational design of Pt-based alloy catalysts for the low-temperature water-gas shift reaction: from extended surfaces to single atom alloys

The rational design of Pt-based catalysts for the low-temperature water-gas-shift (LT-WGS) reaction is an active research field because of its important role played in the fuel cell-based hydrogen economy, especially in mobile applications. Previous theoretical analyses have suggested that Pt alloys, leading to a weaker CO binding affinity than the Pt metal, could help alleviate CO poisoning and thus should be promising catalysts of the LT-WGS reaction. However, experimental research along this line was rather ineffective in the past decade. In the present work, we employed the state-of-the-art kinetic Monte Carlo (KMC) simulations to examine the influences of the electronic effect by introducing sub-surface alloys and/or core–shell structures, and the synergetic effect by introducing single atom alloys on the catalytic performance of Pt-alloy catalysts. Our KMC simulations have highlighted the importance of the OH binding affinity on the catalyst surfaces to reduce the barrier of water dissociation as the rate determining step, instead of the CO binding affinity as has been emphasized before in conventional mean-field kinetic models. Along this new direction of catalyst design, we found that Pt–Ru synergetic effects can significantly increase the activity of the Pt metal, leading to Ru_1–3@Pt alloys with a tetrahedron site of one surface-three subsurface Ru atoms on the Pt host, showing a turnover frequency of about five orders of magnitude higher than the Pt metal.

KMC simulations show that decreasing the barrier of H₂O decomposition is more beneficial than decreasing the CO binding affinity in LT-WGS, while the latter was overemphasized by MF-MKM. Here Ru_1–3@Pt alloy is proposed as a promising catalyst.