视频文字信息检查工具的设计与实现

针对某些特定视频中,画面文字信息经常包含较为敏感文字信息,导致信息泄露,设计实现了一种视频画面中的文字的检测识别系统,对视频画面中的文字标语、文字条幅,新闻画面中的文字导语等信息进行识别与比对。采用基于双阈值的视频镜头分割算法,根据颜色直方图信息提取关键帧,采用最大稳定极值区域算法提取图像中稳定区域,通过聚类和级联分类器实现文字区域提取,最后将文字区域分割后进行OCR识别,实验表明,设计的系统针对复杂背景中的文字能够达到较高的检测识别率。     

基于LabVIEW和Arduino的远程监控系统设计与实现

针对现场采集数据实时远程监控的要求,根据LabVIEW强大的功能模块和Arduino灵活易用的开发特点,提出以Arduino为控制器,采用Arduino软件与LabVIEW软件交互编程的设计思想。为解决LabVIEW在本地服务器Web发布的局限性,同时简化系统的硬件设计,增加使用的灵活性,使用云计算作为服务器,设计实现了一种基于LabVIEW和Arduino的无线串口采控和实时同步Web发布的系统。测试结果表明,该系统界面友好,运行可靠,可扩展性很强,可以在整个互联网上通过网页建立Web请求。     

同时发射和接收纵波和横波的压电复合材料换能器

通过控制压电复合材料中压电相的分布形式，本文具有在百度模振动的１－３型压电复合材料和具有扭转模振动的拼接２－２型压电复合材料组合在一起，构成一种混俣模式压电材料，并测试了这种压电材料晶片的性能参数，使用这种晶片作的换能器可以根据使用者的要求，单独产生纵波或横波，也可同时产生这两种波。     

羊八井50m2RPC实验及初步测试结果

介绍了羊八井50m²电阻板室(RPC)地毯实验的结构、安装和对其性能的初步测试.测试的结果表明RPC完全能够很好地在海拔4300m,气压594mbar的羊八井宇宙线观测站正常地运行.     

光纤基底TiNi形状记忆合金薄膜制备工艺

将TiNi基记忆合金薄膜与光纤相结合可制成智能化、集成化且成本经济的微机电系统和微传感器件.本文采用磁控溅射法在二氧化硅光纤基底上制备TiNi记忆合金薄膜,系统讨论了溅射工艺参数以及后续退火处理对薄膜质量的影响.采用自研制光纤镀膜掩膜装置在直径为125μm的光纤圆周表面上形成均匀薄膜.实验表明:在靶基距、背底真空度、Ar气流量和溅射时间一定的条件下,溅射功率存在最佳值;溅射压强较大时,薄膜沉积速率较低,但薄膜表面粗糙度较小.进行退火处理后,薄膜形成较良好的晶体结构,Ti_49.09Ni_50.91薄膜中马氏体B19′相和奥氏体B2相共存,但以B19′为主.根据本文研究结果,在玻璃光纤基底上制备高质量的TiNi基记忆合金薄膜是可实现的,本工作为下一步研制微机电系统和微型传感器做了基础准备.     

Ag,Zn掺杂对CdS电子结构和光学性质的影响

运用密度泛函平面波赝势方法和广义梯度近似, 对替代式掺杂Ag和Zn的闪锌矿CdS的超晶胞晶体结构、电子结构和光学性质进行了计算, 分析了其电子态分布与结构的关系,给出了掺杂前后CdS体系的介电函数和复折射率函数. 研究表明,掺有Ag的CdS晶体空穴浓度增大,会明显提高材料的电导率, 而Zn掺杂不改变CdS晶体载流子浓度; Ag, Zn掺杂体系光学带隙均变窄; 通过分析掺杂前后CdS晶体的介电函数和复折射率函数,解释了体系的发光机理. 关键词： 密度泛函理论 Ag,Zn掺杂CdS 电子结构 光学性质     

Green synthesis of palladium nanoparticles using broth of Cinnamomum camphora leaf

The development of dependable, environmentally benign processes for the synthesis of nanoscale materials is an important aspect of nanotechnology. In the present study, we report one-pot biogenic fabrication of palladium nanoparticles by a simple procedure using broth of Cinnamomum camphora leaf without extra surfactant, capping agent, and/or template. The mean size of palladium nanoparticles, ranging from 3.2 to 6.0 nm, could be facilely controlled by merely varying the initial concentration of the palladium ions. The polyols components and the heterocyclic components were believed to be responsible for the reduction of palladium ions and the stabilization of palladium nanoparticles, respectively.     

Theoretical Studies of O(1D)+HD (v=0, j=0, 1, 2, 3)→OD(H)+H(D) Reaction

利用准经典轨线计算方法在DK势能面上对O+HD进行了计算,获得了产物的反应截面和分支比OD/OH. 计算结果表明,当碰撞能由4.6 kJ/mol增加到46.0 kJ/mol时,产物的反应截面随着碰撞能的增加明显减小;产物的平均分支比随着转动量子数的增加逐渐减小.     

偶氮侧基聚合物光致异构动力学研究

本文对偶氮侧基聚合物相位共轭光时间特性进行了研究,得到了相位共扼光产生机制─光致异构过程的时间常数.在相位共轭光上升阶段,其时间常数在0.4～0.5s之间,在相让共轭光的衰减过程,衰减满足双指数关系,分段拟合得到较好的结果,且得到快过程的时间常数为0.27s,慢过程的时间常数为0.78s.     

Sonochemical coating of magnetite nanoparticles with silica

Magnetite nanoparticles were coated with silica through the hydrolysis and condensation of tetraethyl orthosilicate (TEOS) under ultrasonic irradiation. The ultrasonic irradiation was used to prevent the agglomeration of the magnetite particles and accelerate the hydrolysis and condensation of TEOS. TEM, DLS, XRF, VSM, TG and sedimentation test were used to characterize the silica-coated magnetite particles. The dispersibility of silica-coated magnetite particles in aqueous solution was improved significantly and the agglomerate particle size was decreased to 110 nm. It was found that the agglomerate particle size of silica-coated magnetite particles was mainly decided by the coating temperature and the pH value in the silica-coating process. The weight ratio of silica in silica-coated magnetite particles was mainly decided by the pH value in the silica-coating process. The dispersibility of silica-coated magnetite particles was mainly decided by the agglomerate particle size of the suspension. The oxidation of magnetite particles in air was limited through the coated silica. The magnetism of silica-coated magnetite particles decreased slightly after silica-coating.