Investigation on crosslinking behaviors of NBR/PVC filled with anhydrous copper sulfate particles by dynamic mechanical analysis

Crosslinking behaviors of acrylonitrile butadiene rubber (NBR)/poly (vinyl chloride) (PVC) alloy, filled with anhydrous copper sulfate (CuSO₄) particles, were investigated for the first time by dynamic mechanical analysis (DMA) under hetero and isothermal modes, respectively. In the heterothermal testing, (NBR/PVC)/CuSO₄ compound showed two marked increases in the storage modulus (E′), corresponding to coordination crosslinking of NBR-CuSO₄ and self-crosslinking of NBR and PVC respectively. During the isothermal testing, a dramatic increase in E′ was found at the initial stage while that of original NBR/PVC alloy was not detected. The marked increase in E′ of (NBR/PVC)/CuSO₄ compound was mainly due to the crosslinking induced by coordination between  CN and Cu²⁺. The increasing extent of E′ increased with the rise of CuSO₄ content, suggesting the formation of a greater number of crosslinks. Moreover, the activation energy (E_a) of crosslinking process was about 139 kJ/mol. In this work, fourier transform infrared spectrum (FT-IR) and equilibrium swelling method were also performed for the characterization of the compound. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 41–51, 2007     

On existence of solutions for some hyperbolic-parabolic-type chemotaxis systems

In this paper, we discuss the local and global existence ofweak solutions for some hyperbolic–parabolic systems modellingchemotaxis.     

Solvothermal synthesis of TiO2: anatase nanocrystals and rutile nanofibres from TiCl4 in acetone

This work reports a new synthetic approach for single‐phase TiO₂ nanomaterials by solvothermal treatment of titanium tetrachloride in acetone at 80–110 °C. Small, uniform, and yet size‐tunable (5–10 nm) anatase titania nanocrystallites were obtained using a low concentration of TiCl₄ in acetone (i.e., at molar ratios of TiCl₄/acetone ≤ 1:15) in the temperature range of 80–110 °C, while rutile nanofibers were synthesized using a high concentration of TiCl₄ (e.g., TiCl₄/acetone = 1:10) at 110 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

Improved coupled-mode theory of anisotropic optical waveguides

A coupled-mode equation for anisotropic waveguide systems of arbitrary cross section and general dielectric distribution is derived. Numerical results comparing the exact calculations to those of the method of Hardy et al. (Opt. Lett., vol.11, 742-4, 1986) show that the same accuracy can be obtained not only for TE, but also for TM mode coupling in the case of anisotropic waveguides, and the improved coupled-mode theory is applicable to the situation when moderately strong coupling occurs under the condition where the edge-to-edge separation of two coupled guides D₂ is about 0.1 μm     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

Economic analysis and optimization of tool portfolio in semiconductor manufacturing

The tool portfolio of a plant refers to the makeup, in quantity and type, of processing machines in the plant. It is determined by taking into consideration the future trends of process and machine technologies and the forecasts of product evolution and product demands. Portfolio planning is also a multicriteria decision-making task involving tradeoffs among, investment cost, throughput, cycle time, and risk. Tool portfolio planning is a complex task that has strong bearing on manufacturing efficiency. In the first part of this paper, a multicriteria economic decision model is presented for optimal configuration. of the portfolio and to determine the optimal factory loading. The second and third parts of the paper contain applications of the model. If plants are closely located or have a twin-plant design, portfolio planning at multiple plants can be integrated to enhance the overall effectiveness of portfolios. In the second part, a novel methodology for arbitrating capacity backup between plants is described. Because the economic model is constructed upon a valuation of both cycle time and throughput, it is a suitable method for the evaluation of cycle time reduction projects. The application procedure is outlined in the third part.     

Enhancement of oxide break-up by implantation of fluorine inpoly-Si emitter contacted p+-n shallow junctionformation

In this study, it is demonstrated that the incorporation of fluorine can enhance poly-Si/Si interfacial oxide break-up in the poly-Si emitter contacted p⁺-n shallow junction formation. The annealing temperature for breaking up the poly-Si/Si interfacial oxide has been found to be as low as 900°C. As a result, the junction depth of the BF₂-implanted device is much larger than that of the boron-implanted device     

10Gbit/S以太网,RPR和MPLS协同工作:城域网的未来

随着数据业务的发展,目前在城域网领域出现了3种很有希望的新技术:MPLS(多协议标记交换)、10 Gbit/s以太网和弹性分组环(RPR).这三种技术都各自有着自己的特点和优点,然而仅仅采用某一项技术并不能解决网络中的全部问题,将这三种技术综合应用就成为一种必要,本文将简要分析这几种技术,及其它们综合起来协同工作的必要性和现实意义.     

The impact of SONET digital cross-connect system architecture ondistributed restoration

The viability of distributed control restoration using digital cross-connect systems (DCS) depends on its capability for restoring services within specified time requirements, and its economics for providing restoration compared to other alternatives. The authors report a Bellcore study for the impact of the DCS architecture on distributed restoration. This study concludes that currently proposed distributed control DCS self-healing schemes may not meet the 2 second restoration objective for large metropolitan local exchange carrier's networks, regardless of the distributed algorithm used, if the present DCS system architecture which uses serial message processing and serial path cross-connection remains unchanged. They also discuss several DCS architecture enhancement options, including a parallel processing/cross-connect DCS architecture, which may improve the service restoration time