In this paper, we experimentally investigate the pattern transition of two-dimensional Faraday waves at an extremely shallow depth in a Hele-Shaw cell. Several patterns of Faraday waves are observed, which have some significant differences in wave profile, wave height and wave length. It is found that, in a wide range of the forcing frequency f, there always exists a region of the acceleration amplitude A, in which there exist the so-called hysteretic jumps between different patterns of Faraday waves. All of these experimental observations could enrich our knowledges about the Faraday waves and would be helpful to the further theoretical studies on the related topic in future. 相似文献
The thermal properties of chlorosulfonated polyethylene (CSM), which was prepared via gas–solid phase method, were studied in this article. The thermal curves were completely tested by differential thermal analysis, thermogravimetry, and differential thermogravimetry. The results showed that CSM 3550 and CSM 3570 prepared by gas–solid phase method had more excellent thermal properties (high initial/final temperature of degradation) than those via solution method, due to the uniform chlorine distribution of them in macromolecular chain. The differential scanning calorimetry curves showed that the transitions of CSM 3550 and CSM 3570 from glassy to the elastic state were also higher than those via solution method. Particularly, CSM 3570 was amorphous and no clear melting peak was observed during the melting process. 相似文献
We investigated crystallinity parameters and ordering domains of poly(3-hexylthiophene-2,5-diyl) blended in [6,6]-phenyl-C61-butyric acid methyl ester films, which were fabricated by pulsed electrospray deposition methods. The crystallinity parameter and the ordering domain were estimated from Raman and optical absorption spectra, respectively. As a result, they were improved with decreasing the off time of pulse voltage, corresponding to the slow evaporation speed of solvent. In addition, both the space-charge limited current mobility and the photoconversion efficiency showed same trend. A highest photoconversion efficiency of 1.11 % was achieved without the thermal annealing process after depositing the active layer. 相似文献
In this study, a novel quad-stable energy harvester (QEH) is developed, in which its coordinates of equilibrium points can be user-defined like programming. This programmable feature distinguishes the proposed QEH from all reported magnet-type or buckling-type vibration energy harvesters. It has the advantage that it is easy to develop a high-performance QEH by appropriately programming these coordinate points and customizing a personalized QEH for different vibration environments. The dynamic model is established by the Ritz method and the Lagrange equation. The analytical steady periodic response is obtained by the average method. When the excitation acceleration is 2 m/s2, the peak power is 575 μW at 8.5 Hz. Also, the influence of the coordinate arrangement of the equilibrium points on the energy harvesting performance is studied. A formula that can quickly determine the equilibrium point coordinates is given, and the QEH designed according to this formula has superior performance. At last, the performance of the designed QEH is compared with other reported vibration energy harvesters. It shows that the QEH has a high average output power (287 μW), high normalized power density (59.8 μW/cm3/g2), and wide operating frequency range (8.4 Hz) among these harvesters.
A novel frequency estimation algorithm for wideband signal with sub-Nyquist sampling is proposed in this paper. With the aid of information provided by the auxiliary delayed sampling channel and the aliased frequency estimation for wideband signal with sub-Nyquist sampling, the frequency aliasing due to sub-Nyquist sampling can be solved. This method can reduce the complexity of the overall hardware at the cost of an auxiliary sampling channel. Furthermore, in order to alleviate the computation burden for its practicability, a more simplified algorithm is put forward and its validity is proved by our numerical simulation results. The Cramer-Rao Lower Bound (CRLB) of the frequency estimation is also derived at the end of this paper. 相似文献
To date,lithium-ion batteries are becoming increasingly significant in the application of portable devices and electrical vehicles,and revolutionary progress in theoretical research and industrial application has been achieved.However,the commercial polyolefin separators with unsatisfying electrolytes affinity and poor thermal stability have extremely restricted the further application of lithium-ion batteries,especially in the high-temperature fields.In this work,magnetron sputtering deposition technique is employed to modify the commercial polyimide separator by coating silicon nitride on both sides.Magnetron sputtering deposition modified polyimide(MSD-PI)composite separator shows high thermal stability and ionic conductivity.More importantly,compared with the cells using Celgard separator,the cells with MSD-PI separator exhibit superior electrochemical performance,especially long-term cycle performance under high temperature environment,owing to the high thermal conductivity of surface Si3 N4 particles.Hence,lithium-ion batteries with MSD-PI separator are capable of improving thermal safety and capacity retention,which demonstrates that magnetron sputtering deposition technique could be regarded as a promising strategy to develop advanced organic/inorganic composite separators for high-temperature lithium-ion batteries. 相似文献
The optical fiber temperature sensoris one of the dis-tributed measurement apparatus applied to the smartstructures of civil and military engineering.In the dis-tributedfiber Ramantemperature sensor ,the anti-Stokesand Stokes scattering radiation is sensi… 相似文献
Tributylstibine can mediate the olefination of carbonyl compounds with bromomalonic ester and with dibromomalonic ester. An initial halophilic attack of tributylstibine on the bromine of bromomalonic or dibromomalonic ester forming an ion pair of bromotributylstibonium cation and malonic (A) or bromomalonic ester carbanion (B) , respectively, is proposed. These ion pairs react with carbonyl compounds to achieve subsequent olefination. Alternatively, 2 equiv of A collapse, with elimination of malonic ester, to form stiborane D , and the ion pair B reacts with another equivalent of tributylstibine to form stiborane D. This last undergoes a Wittig-type reaction with carbonyl compound to achieve olefination. 相似文献