Spectrofluorimetric determination of cysteine by 5-maleimidyl-2-(m-methylphenyl)benzoxazole

A new thiol weak-fluorescence probe, 5-maleimidyl-2-(m-methylphenyl)benzoxazole (MMPB), gives a highly fluorescence product in the presence of Cys. In this paper, MMPB has been developed for the fluorimetric determination of cysteine (Cys). At lambda(ex)/lambda(em) = 305.6/425.6 nm, the linear range is from 0 to 3.3 x 10(-7) mol l(-1) and the detection limit (sigma = 3) of 6.2 x 10(-10) mol l(-1). The main advantage of this method lies in the relative high selectivity compared with the methods using other N-substituted maleimide type of thiol reagents, in which 0.15-fold (molar ratio) of GSH is allowed and most of other amino acids at 100-fold (molar ratio) level had no obvious effect on the results. The proposed method has been applied to the determination of Cys in real samples.     

110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。     

Ion flotation of rhodium(III) and palladium(II) with anionic surfactants

The ion flotation of rhodium(III) and palladium(II) with some anionic surfactants has been investigated. Two flotation procedures are proposed for the separation of some platinum metals, based on differences in the kinetic properties of the chloro-complexes of rhodium(III), palladium(II) and platinum(IV). The first involves the selective flotation of Rh(H(2)O)(3+)(6) from PdCl(2-)(4) and PtCl(2-)(6) in dilute hydrochloric acid with sodium dodecylbenzenesulfonate (SDBS). After precipitation of the hydroxide and redissolution in dilute acid, the Rh(III) is converted into Rh(H(2)O)(3+)(6), Pd(II) and Pt(IV) remaining as PdCl(2-)(4) and PtCl(2-)(6) respectively, and separation is achieved by floating the Rh(H(2)O)(3+)(6) with SDBS. The second is for separation of Pd(II). Prior to flotation, the solution of PdCl(2-)(4) and PtCl(2-)(6) is heated with ammonium acetate to convert PdCl(2-)(4) into Pd(NH(3))(2+)(4). The chloro-complex of Pt(IV) is unaffected. The complex cation, Pd(NH(3))(2+)(4), is then selectively floated with SDBS. The procedures are fast, simple and do not require expensive reagents and apparatus.     

Application of Headspace Liquid-Phase Microextraction to the Analysis of Volatile Halocarbons in Water

The determination of four volatile halocarbons (CHCl₃, CCl₄, C₂HCl₃ and C₂Cl₄) in water by headspace liquid-phase microextraction (HS-LPME) with gas chromatography using a micro electron capture detector (GC-μECD) is described. The effects of the type and volume of the extraction solvent, headspace volume, stirring rate, extraction temperature and time and ionic strength on the extraction performance are investigated and optimized. The developed protocol yields a linear calibration curve in the concentration range from 0.05 to 50 µg L^?1 for the target analytes; the detection limits ranged from 0.003 to 0.146 µg L^?1 and the relative standard deviation (R.S.D.) values below 8.45%. The results demonstrate that HS-LPME followed with GC-μECD is a simple and reliable technique for the determination of volatile halocarbons in water samples.     

Synthesis, structure and fluorescence of a novel diarylethene

The photochromic diarylethene, 1,2-bis(2-methyl-5-(2-(1,3-dithiolpentane))-thien-3-yl)perfluorocyclopentene (BMDTP), has been synthesized in high yield and its structure was determined by X-ray crystallographic analysis. The compound undergoes a photochromic reaction both in solution and in the single crystalline phase. In addition, its fluorescence property in solution is discussed.     

Morphology and tensile properties of glass bead filled low density polyethylene composites: MATERIAL PROPERTIES

The mechanical properties of glass bead filled low density polyethylene (LDPE) composites in tension have been investigated by using an Instron material testing machine. It is found that with increase of the glass bead weight fraction (φ) the tensile modulus (E_c) and the tensile yield stress (σ_yc) increase as a form of nonlinear function but contrary to the elongation strain at break; the correlation between E_c and φ accords with the logarithmic mixing rule and the relationship between σ_y and the volume fraction (φ_f) can be described by means of a second order equation; the effects of the glass bead diameter on the mechanical properties are not large; when φ and the bead size are suitable, the enhanced toughness effect of the filled-systems is more significant; the tensile strength of the glass bead filled system pretreated with a coupling agent are somewhat greater than those of the untreated system. In addition, the morphology of the samples is studied to explain the relationship between the micro-structure and the mechanical properties of the composites.     

C36填充单壁碳纳米管的结构和电子性质

The structures and electronic properties for C36 encapsulated in four single-wall armchair carbon nanotubes (C36@(n,n), n=6-9) were calculated using ab initio self-consistent field crystal orbital method based on density functional theory. The calculations show that the interwall spacing between the carbon nanotube and C36 plays an important role in the stabilities of resultant structures. The optimum interwall spacing is about 0.30 nm and the tubes can be considered as inert containers for the encapsulated C36. The Fermi levels and relative position of energy bands also have something to do with the interwall spacing. The shifts of Fermi level and C36-derived electron states modulate the electron properties of these structures. The extra electrons fill the bands of C36@(8,8) with the optimum interwall spacing almost in a rigid-band manner.     

A mesoporous template route to the low-temperature preparation of efficient green light emitting Zn2SiO4:Mn phosphors

Green light emitting Zn2SiO4:Mn phosphors have been prepared via a low-temperature solid-state reaction using mesoporous silica SBA-15 template. This mesoporous silica template method features low-temperature formation of phosphors and easy doping. The structure and morphology of the phosphors were characterized by XRD, SEM, TEM, and N2 adsorption/desorption techniques, which confirmed the single crystallinity, ordered mesostructure, closed pore channels, and elongated ropelike morphology. The luminescent properties were examined by photoluminescence spectroscopy at room temperature, and the results of fluorescence decay time measurements show non-single-exponential decay behavior and a decrease of the decay time with an increase of the Mn concentration.     

天祝煤MRF工艺热解焦油的组成分析

本文对天祝煤ＭＲＦ（ＭｕｔｉｓｔａｇｅＲｏｔａｒｙＦｕｒｎａｃｅ）热解焦油进行了常规及元素分析，了解其基本特性；用毛细管色谱分别对焦油各馏分进行了分析，共定性定量了１０３种化合物，酚类化合物以低级酚（苯酚、甲酚）为主，中性化合物为多烷基芳烃衍生物、脂肪族链状烷烃和烯烃。上述分析结果为从焦油中提取酚类化工原料或将其加工成各种燃料油的可行性提供了依据。     

铑配合物的抗肿瘤活性及其作用机制研究

自从Rosenberg等人发现顺铂具有抗肿瘤活性以来，金属配合物的抗肿瘤活性引起了人们的广泛关注。本文综述了近年来铑配合物抗肿瘤活性的研究进展，并对铑配合物的抗肿瘤机制和构效关系进行了探讨，为进一步寻找高效低毒和抗肿瘤谱广的新药物揭示了可循的途径。