Application of asymptotic waveform evaluation to eigenmode expansion method for analysis of simultaneous switching noise in printed circuit boards (PCBs)

In this paper, the asymptotic waveform evaluation (AWE) technique is first applied to the conventional eigenmode expansion method for characterizing a power/ground (P/G) plane pair and analyzing the simultaneous switching noise on such plane pairs for printed circuit boards or multichip modules. The application of AWE avoids a large number of iterations in computing the impedance frequency response of a P/G plane pair structure and greatly reduces the computation time. Meanwhile, to obtain an accurate solution in an entire frequency range, we employ the complex frequency hopping technique which can help select multiple expansion points. In addition, the proposed approach can also be used to characterize the P/G plane pair structures with irregular shapes. Three examples demonstrate its high efficiency and good accuracy.     

Reliability of nonhermetic bias-free LiNbO/sub 3/ modulators

Reliability for nonhermetic bias-free LiNbO/sub 3/ optical modulators is estimated from aging data in both dry and damp heat conditions. The two dominant failure modes for these devices are: 1) device performance degradation due to temperature-activated drift of the annealed proton-exchange waveguide; and 2) optical insertion loss increase due to humidity-induced deterioration of glued fiber joints. A total failure rate of 30 failures in time (FITs) is predicted for 20 years operation at 45/spl deg/C and moderate humidity conditions (40% RH). This estimate based on laboratory-test data is consistent with a field failure rate <5 FITs observed in fielded devices.     

Hankel transform-domain analysis of scattered fields in multilayer planar waveguides and lasers with circular gratings

Radiation patterns of scattered fields with arbitrary azimuthal orders in multilayer planar waveguides and laser cavities with circularly symmetric gratings are formulated based on the volume current method. Full-wave Green's function analysis based on the integral transform method lies at the heart of this approach. Unlike the conventional approach, the dyadic Green's function relates some auxiliary fields to some auxiliary sources in the spectral domain. These auxiliary functions are defined to facilitate the spectral domain formulation in the cylindrical coordinate system and the use of transfer matrix method for obtaining a closed-form solution of the spectral Green's function in multilayer planar structures. More importantly, it is shown that the far-field pattern of the scattered field can be expressed directly in terms of the auxiliary fields in the Hankel transform domain.     

Subspace-based blind channel estimation for OFDM by exploiting virtual carriers

Reliable channel estimation is indispensable for orthogonal frequency-division multiplexing (OFDM) systems employing coherent detection and adaptive loading in order to achieve high data rate communications. Several options exist in practical OFDM systems-including training symbols, cyclic prefix, virtual carriers, pilot tones, and receiver diversity-to facilitate channel estimation. In this paper, a subspace blind channel estimation method based on exploiting the presence of virtual carriers is proposed for OFDM systems over a time-dispersive channel. The method can be applied to conventional OFDM systems with cyclic prefix as well as OFDM systems with no cyclic prefix. The reduction/elimination of cyclic prefix thereby provides the OFDM systems the potential to achieve higher channel utilization than most previously reported cyclic prefix based estimators. Sufficient channel identifiability condition is developed as well. Comparison with two other recently reported subspace methods is presented via computer simulations to support the effectiveness of the proposed method.     

Reversible watermarking scheme with image-independent embedding capacity

Permanent distortion is one of the main drawbacks of all the irreversible watermarking schemes. Attempts to recover the original signal after the signal passes the authentication process are being made, starting just a few years ago. Some common problems, such as salt-and-pepper artefacts owing to intensity wraparound and low embedding capacity, can now be resolved. However, some significant problems remain unsolved. First, the embedding capacity is signal-dependent, i.e., capacity varies significantly depending on the nature of the host signal. The direct impact of this is compromised security for signals with low capacity. Some signals may be even non-embeddable. Secondly, while seriously tackled in irreversible watermarking schemes, the well-known problem of block-wise dependence, which opens a security gap for the vector quantisation attack and transplantation attack, are not addressed by researchers of the reversible schemes. This work proposes a reversible watermarking scheme with near-constant signal-independent embedding capacity and immunity to the vector quantisation attack and transplantation attack.     

A note on an SOR-like method for augmented systems

Golub et al. (2001, BIT, 41, 71–85) gave a generalizedsuccessive over-relaxation method for the augmented systems.In this paper, the connection between the SOR-like method andthe preconditioned conjugate gradient (PCG) method for the augmentedsystems is investigated. It is shown that the PCG method isat least as accurate (fast) as the SOR-like method. Numericalexamples demonstrate that the PCG method is much faster thanthe SOR-like method.     

氘－氚聚变等离子体中高能α粒子的诊断

本文对于用电荷交换方法或低杂波涨落的方法测量高能α粒子作了简短的评述，建议用核反应１３Ｃ（α，ｎ）１６Ｏ测量氘－氚聚变等离子体中的高能α粒子，并提出了一种减少杂质污染，增加穿透深度的方法。     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

胃动力信息采集与分析系统设计

本文设计了一套提取胃电和胃阻抗信号的胃动力信息采集与分析系统，该系统由采集系统和分析系统两部分构成。前者以单片机（ADuC834）为核心部件，实现了胃电和生物阻抗信号的同步采集和数据传输。后者对提取的阻抗信号和胃电信号运用小波多分辨分析处理，利用小波变换将胃阻抗信号从呼吸和血流信号中分离。系统可以应用于分析功能性消化不良患者胃动力的电过程和机械过程。     

En/Decoder for Spectral Phase-Coded OCDMA System Based on Amplitude Sampled FBG

A novel en/decoder for spectral phase-coded optical code-division multiple-access system based on amplitude sampled fiber Bragg grating (FBG) is proposed. Both equivalent chirp and equivalent phase shift are achieved by amplitude sampling. Compared with previous en/decoder based on step chirped FBG, it is easier to fabricate. The performance of the proposed en/decoder is verified by both numerical simulation and experimental demonstration.