Optical characteristics of semiconductor saturable absorber mirrors investigated by the reflection Z-scan technique

Recently, the semiconductor saturable absorber mirror (SESAM) has become a key component of passive mode-locked solid-state lasers. Here we present a simple method based on the reflection Z-scan technique to measure the key optical parameters of SESAM such as saturation fluence and modulation depth. The experimental results demonstrate that our method is able to perform with a high accuracy of 10⁻⁴ and a dynamic range of over four orders of magnitude.     

塑料闪烁体的辐照特性

利用⁶⁰Co放射源分别对3种塑料闪烁体(BC-408, EJ-200, BC-404)进行辐照损伤研究, 比较辐照前后的透射谱、发射谱及光产额的变化, 发现3种闪烁体在低剂量具有较好的抗辐照性能; 当照射剂量超过1.44×10⁴Gy时,透射谱明显变坏, 光输出减少很严重, 但发射谱却保持不变.     

光纤光栅的长度对其峰值反射率的影响

利用耦合模理论,数值分析了当光纤光栅(FBG)折射率变化为均匀分布、直流切趾高斯分布时,光纤光栅长度对其峰值反射率的影响。研究结果对光纤光栅外腔半导体激光器的设计和性能优化具有重要的意义。     

Homogeneous immunoassays

Applied Biochemistry and Biotechnology -     

利用微悬臂梁表面应力研究聚N-异丙基丙烯酰胺分子的构象转变

提出了一种基于微悬臂梁传感技术研究大分子折叠/构象转变的新方法.通过分子自组装的方法将热敏性的聚N-异丙基丙烯酰胺(PNIPAM)分子链修饰到微悬臂梁的单侧表面，用光杠杆技术检测温度在20—40℃之间变化时由于微悬臂梁上的PNIPAM分子在水中的构象转变所引起的微悬臂梁变形.实验结果显示：在升温过程中，微悬臂梁的表面应力发生了变化并且导致微悬臂梁产生了弯曲变形，这个过程对应着微悬臂梁上的PNIPAM分子从无规线团构象到塌缩小球构象的构象转变.在降温过程中，微悬臂梁发生了反方向的弯曲变形，这对应着PNIPA 关键词： 构象转变 聚N-异丙基丙烯酰胺分子链 表面应力 微悬臂梁     

表面传导电子发射显示器件电场分布的理论研究

利用电磁理论对表面传导电子发射显示器件的单个子像素在笛卡尔坐标系内建立合理的电学物理模型，对内部电场强度和电势进行了深入研究，推导出了模型不同部分的面电荷密度、电场强度和电势的表达式.为了形象地表征其电学特性，利用MATLAB 6.5对电场强度和电势的分布情况进行了模拟，从理论上对模拟曲面给出了合理的解释，分析了子像素内部电子的发射机理和电学行为，并与电子多重散射模型和惯性离心模型进行了对比，解释了SED阳极电流形成的重要原因.在误差允许的范围内，本模型有关电场强度分布的结论与惯性离心模型一致. 关键词： 表面传导电子发射显示 遂穿效应 面电荷密度 电场强度     

Feature Selection using Fuzzy Support Vector Machines

The feature selection consists of obtaining a subset of these features to optimally realize the task without the irrelevant ones. Since it can provide faster and cost-effective learning machines and also improve the prediction performance of the predictors, it is a crucial step in machine learning. The feature selection methods using support machines have obtained satisfactory results, but the noises and outliers often reduce the performance. In this paper, we propose a feature selection approach using fuzzy support vector machines and compare it with the previous work, the results of experiments on the UCI data sets show that feature selection using fuzzy SVM obtains better results than using SVM.     

火工品可靠性试验数据的综合分析方法

升降法试验数据和固定刺激量下的成败型试验数据,是两种最常见的火工品可靠性试验数据．我们应用Markov链,研究了升降法试验数据下,感度分布参数的极大似然估计的特性．在此基础上,应用Bootstrap方法和Bayes方法,给出了综合分析两种试验数据的方法．最后,将该方法应用于520底火的可靠性鉴定,得出了有益的结论．     

Simulation of island aggregation influenced by substrate temperature, incidence kinetic energy and intensity in pulsed laser deposition

Using kinetic Monte Carlo method, we have simulated a pulsed energetic growth process in pulsed laser deposition. During the growth of film, substrate temperature mainly influences upon film morphology by directly enhancing the adatom mobility through the temperature-dependent thermal vibration. By contrast, the effect of incidence kinetic energy on film growth is complex resulting from the collisions between the incident particles and the adatoms. The results show that improving incident kinetic energy cannot significantly accelerate the migration rate of adatom but change surface microstructure and promote single adatom formation resulting in more island aggregation density. Moreover, since pulse-influx characterizes pulsed laser deposition, the intensity per pulse contributes to the evolvement of nucleation density and the results illustrate that a general scaling law different from ordinary power law still exists in energetic growth of pulsed laser deposition.