型煤发展的回顾与展望

煤炭科学研究总院建院以来型煤研究工作的进展状况、主要成果,并对几项工业型煤技术进行了概述和评价,还对今后型煤研究方向提出了建议。     

Fabrication of a heterodyne receiver OEIC with optimized integration process using three MOVPE growth steps only

An optimized integration process is reported requiring only three epitaxial growth steps for the fabrication of an OEIC encompassing a single-mode laser, a waveguide element, and fast photodiodes. The process was applied to the fabrication of a heterodyne receiver including a semi-insulating buried heterostructure (SIBH)-DFB-laser with an output power of 14 mW and a side-mode suppression ratio greater than 40 dB, a 3-dB coupler, and high-speed balanced photodiodes with a bandwidth of 9 GHz. The laser can also be used as a transmitter laser exhibiting a modulation bandwidth of 11 GHz.     

核内核子－核子非弹散射截面（Ⅰ）

在与平均场、核内核子－核子弹性散射截面以及输运方程相统一的理论框架内推导了核内核子－核子非弹散射截面的解析表达式．其数值结果能很好地重现自由非弹截面的实验值，所计算的有效非弹截面与Ｄｉｒａｃ－Ｂｒｕｅｃｋｎｅｒ的计算结果相一致．     

局域网服务器缓冲区容量的Petri网设计方法

本文在分析局域网服务器信息缓冲区、数据包接受和发送缓冲区的相互关系基础上提出一种新的局域网服务器缓冲区设计方法─—广义随机Ｐｅｔｒｉ网方法，并给出了局域网服务器信息缓冲区的广义随机Ｐｅｔｒｉ网模型。该设计方法理论完备、严谨实用，且不再局限于追求某一边界值（上限或下限），并且避免了排队理论处理多级服务的繁琐公式。最后本文用一例题说明了这种方法的应用。     

新型蓝绿发光材料ZnSe／BeTe超晶格的能带剪裁

由于器件的快速退化，101.5小时似乎成了Znse基蓝绿色半导体激光器难于逾越的寿命极限。分析退化机制，发现在强电流注入的半导体激光器中，热退化具有重要影响。研究表明，用作载流子限制层的宽带Ⅱ-Ⅵ族四元合金（如ZnMgSSe）只能对ZnSe中的电子有效地限制，无法对空穴很好地限制;而对BeTe，却只能对空穴进行有效的限制，无法对电子很好地限制。这导致ZnSe（或BeTe）活性层空穴（或电子）漏电发热，引起退化。本文提出以ZnSe／BeTe超晶格为蓝绿发光层，并用包络函数理论具体计算了阱宽、垒宽对载流子能级的不同影响，考察了ZnSe、BeTe厚度比和超晶格周期对带隙、载流子限制能力的调节。为研制新型长寿命蓝绿色半导体激光器提供了一条新的途径。     

大型复杂高精度波导钎焊设备的研制：简介ZHS—132型真空钎焊炉

应军事电子装备，特别是军用雷达预研和生产的急需，电子工业部第二研究所近期研制的成功大型、复杂、高精度波导钎焊设备ＺＨＳ－１３２型真空钎焊炉。文中主要介绍了该设备的开发背景和对波导钎焊工艺的影响，该设备的设计构思、结构和技术特征，使用功能和效果，以及推广应用前景。     

Airborne scatterometers: investigating ocean backscatter under low and high-wind conditions

Attempting to understand and predict weather on a local and global basis has challenged both the scientific and engineering communities. One key parameter in understanding the weather is the ocean surface wind vector because of its role in the energy exchange at the air-sea surface. scatterometers, radars that measure the reflectivity of a target offer a tool with which to remotely monitor these winds from tower-, aircraft-, and satellite-based platforms. This paper introduces three current airborne scatterometer systems, and presents data collected by these instruments under low-, moderate-, and high-wind conditions. The paper focuses on airborne scatterometers because of their ability to resolve submesoscale variations in wind fields. Discrepancies between existing theory and the observations are noted and the concerns in measuring low-wind speeds discussed. Finally, the application of using this technology for estimating the surface-wind vector during a hurricane is demonstrated     

2-D dopant profiling in VLSI devices using dopant-selectiveetching: an atomic force microscopy study

We report a detailed mapping of a 2-D dopant profile on a fully processed industrial sample with large dynamic range and high spatial resolution by utilizing a dopant-selective etching process and Atomic Force Microscopy. The experimental results show excellent agreement with those obtained from SRP and SIMS as corroborative methods. We also discuss the most critical factors which influence the applicability, reproducibility, and reliability of this method     

The effects of plasma etching induced gate oxide degradation onMOSFET's 1/f noise

The effects of the plasma etching process induced gate oxide damages on device's low frequency noise behavior are investigated on MOSFET's fabricated with different field plate perimeter to gate area ratio antennas. Abnormal 1/f noise spectrum with a shoulder centered in the frequency range of 100 and to 1 kHz was frequently observed in small geometry devices, and it is attributable to a nonuniform distribution of oxide traps induced by plasma etching process     

格状编码和RS码级连技术在HDTV中应用的性能模拟

设计一种用于ＨＤＴＶ地面数字传输系统的级连格状编码和ＲＳ码方案，并对其在ＨＤＴＶ中应用进行计算机模拟。模拟结果表明：该级连格状编码方案在低信噪比具有较好的误码性能。