Minimum entropy and information measure

Kapur et al. (1995) introduced the MinMax information measure, which is based on both maximum and minimum entropy. The major obstacle for using this measure, in practice, is the difficulty in finding the minimum entropy. An analytical expression has already been developed for calculating the minimum entropy when only variance is specified. An analytical formula is obtained for calculating the minimum entropy when only mean is specified, and numerical examples are given for illustration     

Improvement of least-squares finite difference method on simulating slider air bearings in head disk systems

Least-squares finite difference (LSFD) method, one of mesh-free methods, is used to solve slider air bearings problem through discritizing the generalized Reynolds equation into nonlinear systems of algebraic equations. Two approximation schemes for the linearization of these equations are presented and compared. And, some new techniques to search supporting points for the reference node in the mesh-free method were proposed and explored. Therefore, these improvements eliminate some potential limitation of the LSFD method previously published and further facilitate its employment in complex slider models. Advanced step slider as an example of negative pressure sliders is simulated and verified using the improved LSFD mesh-free method in head disk systems.     

A comparison of spin relaxation and local motion between symmetrically and asymmetrically ring-substituted bisphenol units in dissolved polycarbonates

Carbon-13 and proton spin-lattice relaxation times were measured at two field strengths on solutions 10% by weight of two polycarbonates in C₂D₂Cl₄ from ?20 to +120°C. The first polycarbonate is an asymmetrically substituted form with one chlorine on one of the two phenylene aromatic rings of the bisphenol unit, whereas the second polycarbonate is symmetrically substituted with two chlorines on each of the two rings. The nuclear spin relaxation data are interpreted in terms of several local motions likely in these polymers. Segmental motion was described by the Hall–Helfand correlation function. Segmental motion in the monosubstituted polycarbonate is somewhat slower than in unsubstituted polycarbonate, whereas segmental motion in the tetrasubstituted polycarbonate is considerably slower. Phenylene ring rotation is observed in unsubstituted polycarbonate and in the monosubstituted polycarbonate above 40°C. Below 40°C in the monosubstituted species, and at all temperatures in the tetrasubstituted species, ring rotation is replaced by ring libration as the predominant motion contributing to spin lattice relaxation. In addition, the rotational motion of the two types of rings in the asymmetric monosubstituted form are very similar although not identical. The substituted ring is slightly less mobile than the rings of unsubstituted polycarbonate. This indicates a strong coupling of ring motion, although the coupling leads to less than synchronous motion. Methyl group rotation is present in both polymers and is little affected by the various structural modifications.     

Anomalous variations of OFF-State leakage current in poly-Si TFTunder static stress

Studies the anomalous variations of the OFF-state leakage current (I_OFF) in n-channel poly-Si thin-film transistors (TFTs) under static stress. The dominant mechanisms for the anomalous I_OFF can be attributed to (1) I_OFF increases due to channel hot electrons trapping at the gate oxide/channel interface and silicon grain boundaries and (2) I_OFF decreases due to hot holes accumulated/trapped near the channel/bottom oxide interface near the source region. Under the stress of high drain bias, serious impact ionization effect will occur to generate hot electrons and hot holes near the drain region. Some of holes will be injected into the gate oxide due to the vertical field (~(V_Gstress V_Dstress)/T _OX) near the drain and the others will be migrated from drain to source along the channel due to lateral electric field (~V_Dstress/L_CH)     

Some results on the unramified principal series ofp-adic groups

Supported in part by NSF grant No. DMS-9003999     

High-breakdown-voltage AlSbAs/InAs n-channel field-effecttransistors

InAs channel field-effect transistors of 1-μm gate length were grown by molecular beam epitaxy and observed to operate at channel electric fields (20 kV/cm) higher than previously demonstrated and several times greater than the threshold for impact ionization in bulk InAs. Voltage gains on the order of 10 were observed with transconductances as high as 414 mS/mm and output conductances as low as 33 mS/mm. These voltage gains are comparable to those of GaAs-based devices and are the highest observed for InAs channel devices. The results demonstrate the potential for practical room-temperature operation of InAs FETs     

一种可用于可调谐环行Ti：Al_2O_3激光器的宽带单向器

本文介绍一种宽带单向器的原理及设计。选用ＴＧＧ作磁旋光介质，旋光石英晶片作补偿片，所设计的色散补偿型宽带单向器预计可在７００～１０００ｎｍ波长范围内实现环行激光腔中的单向行波运行；将其应用在可调谐环行Ｔｉ：Ａｌ２Ｏ３激光器中，获得了良好的实验结果。     

High-T/sub 0/ strain-compensated InGaAsSb-AlGaAsSb quantum-well lasers emitting at 2.43 /spl mu/m

Strain-compensated InGaAsSb-AlGaAsSb quantum-well (QW) lasers emitting near 2.5 /spl mu/m have been grown by solid-source molecular beam epitaxy. The relatively high arsenic composition causing a tensile strain in the Al/sub 0.25/GaAs/sub 0.08/Sb barriers lowers the valence band edge and the hole energy level, leading to an increased hole confinement and improved laser performance. A 60% external differential efficiency in pulsed mode was achieved for 1000-/spl mu/m-long lasers emitting at 2.43 /spl mu/m. A characteristic temperature T/sub 0/ as high as 163 K and a lasing-wavelength temperature dependence of 1.02 nm//spl deg/C were obtained at room temperature. For 2000 /spl times/ 200 /spl mu/m/sup 2/ broad-area three-QW lasers without lateral current confinement, a low pulsed threshold of 275 A/cm/sup 2/ was measured.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Synthesis and nuclear magnetic resonance analysis of starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers

A new biodegradable starch graft copolymer, starch‐g‐poly(1,4‐dioxan‐2‐one), was synthesized through the ring‐opening graft polymerization of 1,4‐dioxan‐2‐one onto a starch backbone. The grafting reactions were conducted with various 1,4‐dioxan‐2‐one/starch feed ratios to obtain starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers with various poly(1,4‐dioxan‐2‐one) graft structures. The microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was characterized in detail with one‐ and two‐dimensional NMR spectroscopy. The effect of the feed composition on the resulting microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3417–3422, 2004