Failure analysis with a focus on thermal aspect towards developing safer Na-ion batteries

Safety requirements stimulate Na-based batteries to evolve from high-temperature Na–S batteries to room-temperature Na-ion batteries(NIBs).Even so,NIBs may still cause thermal runaway due to the external unexpected accidents and internal high activity of electrodes or electrolytes,which has not been comprehensively summarized yet.In this review,we summarize the significant advances about the failure mechanisms and related strategies to build safer NIBs from the selection of electrodes,electrolytes and the construction of electrode/electrolyte interfaces.Considering the safety risk,the thermal behaviors are emphasized which will deepen the understanding of thermal stability of different NIBs and accelerate the exploitation of safe NIBs.     

Strong Pauli paramagnetic effect in the upper critical field of KCa2Fe4As4F2

Recently, 12442 system of Fe-based superconductors has attracted considerable attention owing to its unique double-Fe As-layer structure. A steep increase in the in-plane upper critical field with cooling has been observed near the superconducting transition temperature, Tc, in KCa2Fe4As4F2 single crystals. Herein, we report a high-field investigation on upper critical field of this material over a wide temperature range, and both out-of-plane(H∥c, Hc2c) and in-plane(H∥ab, Hc2ab ) directions have been measured.A sublinear temperature-dependent behavior is observed for the out-of-plane Hc2c , whereas strong convex curvature with cooling is observed for the in-plane Hc2ab . Such behaviors could not be described by the conventional Werthamer-Helfand-Hohenberg(WHH) model. The data analysis based on the WHH model by considering the spin aspects reveals a large Maki parameter α=9,indicating that the in-plane upper critical field is affected by a very strong Pauli paramagnetic effect.     

Hyperchaos,quasi-period and coexisting behaviors in second-order-memristor-based jerk circuit

The European Physical Journal Special Topics - This paper generalizes a second-order-memristor-based jerk circuit, which is achieved by substituting the first-order memristor contained diode-bridge...     

A conditional symmetric memristive system with amplitude and frequency control

By introducing a memristor into a chaotic system with a single non-quadratic term and substituting an absolute value function for conditional symmetry, a unique chaotic system is constructed. Firstly, the system shares a special structure of symmetry and conditional symmetry. Secondly, the amplitude and frequency of the system variables can be rescaled by the applied memristor. Interestingly it gives a new case of attractor control namely partial amplitude control and global frequency control. At last, as a new regime of extreme multistability, the memristive system shows relatively simple bifurcation according to the initial condition. This new class of chaotic system has never been reported to the best of our knowledge.

     

Traveling Wave Solutions in a Chemotaxis Model with Two Chemoattractants

In this work, we investigate the existence and non-existence of traveling wave solutions for a chemotaxis model with two chemoattractants. To prove our main results, we apply the dynamical systems theory by constructing a positively invariant set in the four-dimensional space. Particularly, we analyze the monotonicity of traveling wave solutions.     

Natural logarithm wavelength modulation spectroscopy

Natural logarithm wavelength modulation spectroscopy(ln-WMS) is demonstrated in this Letter. Unlike the conventional wavelength modulation spectroscopy(WMS)-2 f technique, it is a linear method even for large absorbance, which is the core advantage of ln-WMS. The treating method used in ln-WMS is to take the natural logarithm of the transmitted intensity. In order to determine the proper demodulation phase, the η-seeking algorithm is introduced, which minimizes the absolute value of the first harmonic within the non-absorbing region. Subsequently, the second harmonic of the absorption signal is extracted by setting the demodulating phase as 2η. To illustrate the validity of ln-WMS, it was applied to water vapor experimentally. The result shows that even if the absorbance(base-e) is between 1.60 and 6.26, the linearity between ln-WMS-2 f and volume fraction is still established. For comparison, measurement with conventional WMS-2 f was also done, whose response no longer kept linearity. The η values retrieved in continuous measurements and the residuals were shown so as to evaluate the performance of the η-seeking algorithm. Time consumed by this algorithm was roughly 0.28 s per measurement. As an alternative WMS strategy, ln-WMS has a wide range of potential applications, especially where the absorbance is large or varies over a wide area.     

Structure Charcterization of EDTA Transition Metal Complexes (I) Study on Sr[Co(HEDTA)H2O]2 · 4 H2O

The d-d transition spectrum of Sr[Co(HEDTA)H₂O]₂ · 4 H₂O crystal was recorded at room temperature and experimental results are discussed quantitatively. Using the ligand field theory and the radial wave function of non-free Co(II), the d-d transition energy levels of the title compound were calculated. And the results are seen to be in good agreement with the experimental values.     

4.8 nm Concave {M_(72)}(M=Co,Ni,Fe) metal-organic polyhedra capped by 18 calixarenes

Three 4.8 nm isostructural{M₇₂}(M=Co^Ⅱ for CIAC-128,Ni^Ⅱ for CIAC-129,Fe^Ⅱ for CIAC-130) metal-organic polyhedra(MOPs) are constructed by eighteen M₄-p-tert-butylthiacalix[4]arene (M₄-TC4A) units bridged via sixteen four-connected 5,5′-(1H-1,2,4-triazole-3,5-diyl) diisophthalic acid (H₄TADIPA) linkers.These MOPs are featured with a rarely reported concave coordination cage,which can be simplified as a squeezed double-decker hexagonal prism pressed from the top and bottom hexagonal faces.Furthermore,CIAC-128,CIAC-129 and CIAC-130 are the highest nuclearity discrete clusters of Co,Ni and Fe reported so far.CIAC-128 has higher separation selectivity of C₃H₈ than CH₄ under ambient conditions,and also exhibits separation selectivity for C₂H₆/CH₄,C₂H₂/CH₄,and C₂H₄/CH₄.In addition,CIAC-128 can provide the cavity for the confined synthesis of noble metal nanoclusters such as Pd nanoclusters and the resulting Pd@CIAC-128 hybrids show higher electrocatalytic activity than commercial Pt/C towards hydrogen evolution reaction (HER).     

A Concise Method to Predict the Mean Dynamic Pressure on a Plunge Pool Slab

Hydrodynamic pressure exerted on a plunge pool slab by jet impingement is of high interest in high dam projects. The present study experimentally investigated the characteristics of pressure induced by a jet through a constant width flip bucket (CFB) and a slit flip bucket (SFB). A pressurized plane pipe was employed in the flume experiments to control the inlet velocities in the flip buckets. A concise method is proposed to predict the mean dynamic pressure field. Its implementation is summarized as follows: First, the position of the pressure field is determined by the trajectories of free jets, and to calculate its trajectories, an equation based on parabolic trajectory theory is used; second, the maximum mean dynamic pressure is obtained through dimensional analysis, and then the pressure field is established by applying the law of Gaussian distribution. Those steps are integrated into a concise computing procedure by using some easy-to-obtain parameters. Some key parameters, such as takeoff velocity coefficient, takeoff angle coefficient, and the parameter k2, are also investigated in this paper. The formulas of these coefficients are obtained by fitting the experimental data. Using the proposed method, the easy-to-obtain geometric parameters and initial hydraulic conditions can be used to calculate the maximum mean dynamic pressure on the slab. A comparison between experimental data and calculated results confirmed the practicability of this model. These research results provide a reference for hydraulic applications.     

Fusion Domain-Adaptation CNN Driven by Images and Vibration Signals for Fault Diagnosis of Gearbox Cross-Working Conditions

The vibration signal of gearboxes contains abundant fault information, which can be used for condition monitoring. However, vibration signal is ineffective for some non-structural failures. In order to resolve this dilemma, infrared thermal images are introduced to combine with vibration signals via fusion domain-adaptation convolutional neural network (FDACNN), which can diagnose both structural and non-structural failures under various working conditions. First, the measured raw signals are converted into frequency and squared envelope spectrum to characterize the health states of the gearbox. Second, the sequences of the frequency and squared envelope spectrum are arranged into two-dimensional format, which are combined with infrared thermal images to form fusion data. Finally, the adversarial network is introduced to realize the state recognition of structural and non-structural faults in the unlabeled target domain. An experiment of gearbox test rigs was used for effectiveness validation by measuring both vibration and infrared thermal images. The results suggest that the proposed FDACNN method performs best in cross-domain fault diagnosis of gearboxes via multi-source heterogeneous data compared with the other four methods.