Performance analysis of adaptive interleaving for OFDM systems

We proposed a novel interleaving technique for orthogonal frequency division multiplexing (OFDM), namely adaptive interleaving, which can break the bursty channel errors more effectively than traditional block interleaving. The technique rearranges the symbols according to instantaneous channel state information of the OFDM subcarriers so as to reduce or minimize the bit error rate (BER) of each OFDM frame. It is well suited to OFDM systems because the channel state information (CSI) values of the whole frame could be estimated at once when transmitted symbols are framed in the frequency dimension. Extensive simulations show that the proposed scheme can greatly improve the performance of the coded modulation systems utilizing block interleaving. Furthermore, we show that the adaptive interleaving out performs any other static interleaving schemes, even in the fast fading channel (with independent fading between symbols). We derived a semi-analytical bound for the BER of the adaptive interleaving scheme under correlated Rayleigh fading channels. Furthermore, we discussed the transmitter-receiver (interleaving pattern) synchronization problem     

Synthesis, morphology and random laser action of ZnO nanostructures

Three-dimensional (3-D) ZnO random-wall nanostructures and one-dimensional (1-D) ZnO nanorods were prepared on silicon substrates by a simple solid-vapour phase thermal sublimation technique. Optical pumped random lasing has been observed in the ZnO random-wall arrays with a threshold intensity of 0.38 MW/cm² in the emission wavelength from 380 to 395 nm. The optical gain was attributed to the closed-loop scattering and light amplification of the ZnO random-wall. The experimental result suggests that the morphology of nanostructure is the key factor to effect random lasing.     

Development of a Profit-Based Air Cargo Loading Information System

In today's competitive logistics business environment, airfreight forwarders need to optimize every aspect of their logistics operations. However, forwarders still heavily rely on human brain and working experiences for calculating complex cargo packing and scheduling problems. Although recent research studies related to cargo packing and scheduling problems have resulted in the development of a number of advanced techniques of cargo planning, it can be seen that most of the research work is focused on the optimization of space in order to achieve the maximum possible amount of cargo to be packed in the minimum of space. After numerous site evaluation and end-user feedbacks, it is found that space optimization does not necessarily cause profit optimization, which is the ultimate aim of logistics providers. A study of contemporary research publications indicates that there are inadequate research studies related to profit-based optimization in cargo packing areas. This paper presents a profit-based air cargo loading information system (ACLIS) that embeds an innovative technology known as heuristics iterative reasoning technology (HIRT) that supports loading plan generation, focusing on maximization of the profit margin. In general, the proposed system is meant to maximize the profit in the airfreight forwarding business. It adopts an objective function governed by a list of constraints together with rule-based reasoning to provide expert advice to support the generation of appropriate loading plans     

DDFSGEN

This paper presents a functional compiler for the automatic design of Direct Digital Frequency Synthesizer (DDFS) integrated circuits (ICs) using a ROM based table look-up architecture. The compiler allows the user to specify high-level specifications such as the acceptable spurious response and it generates the IC architecture, floorplan, and layout. To construct the layout for different specifications, a library of parameterized macrocells has been developed in 1.2 m CMOS technology.A test chip with a quadrature DDFS module has been generated, using the compiler, and fabricated. The chip has two input signals: one is for frequency control while the other is for phase initialization. Input and output word lengths are 16 bits and 6 bits respectively. The chip complexity is approximately 12,000 transistors (DDFS core) and the die size is 4.8×2.9mm ². A maximum sample rate of 80 MHz has been attained implying a maximum sine (cosine) output frequency of 40 MHz and a frequency resolution of 1.22 kHz. The maximum spurious level measured is –46 dB.     

The exterior Dirichlet problem for quasi-linear elliptic equations with small boundary data

It is shown that if the order of non-uniformity of a quasi-linear elliptic equation is h,10,2(h–1)/h norm. For 0h1,existence of a bounded solution is guaranteed without any smallness assumption on the given boundary data.More precise information is given for the special case of the minimal surface equation.     

Single-photon vacuum-ultraviolet laser-pulsed-field ionization-photoelectron studies of trans- and cis-1-bromopropenes

The vacuum-ultraviolet (VUV) pulsed-field ionization-photoelectron (VUV-PFI-PE) spectra of trans-1-bromopropene (trans-CH(3)CH[Double Bond]CHBr) and cis-1-bromopropene (cis-CH(3)CH[Double Bond]CHBr) have been measured in the energy region of 74 720-76 840 cm(-1). The simulation of fine structures observed in the origin VUV-PFI-PE vibrational bands of these molecules has provided the ionization energies (IEs) of trans-1-bromopropene and cis-1-bromopropene to be 74 779.3+/-2.0 cm(-1) (9.2715+/-0.0002 eV) and 75 140.2+/-2.0 cm(-1) (9.3162+/-0.0002 eV), respectively. The vibrational bands resolved in these VUV-PFI-PE spectra at energies 0-1700 cm(-1) above the IEs of trans-1-bromopropene and cis-1-bromopropene have been assigned based on theoretical vibrational frequencies and calculated Franck-Condon factors for the ionization transitions.     

Excess partial molar enthalpies,entropies, Gibbs energies,and volumes in aqueous dimethylsulfoxide

The excess partial molar enthalpies, the vapor pressures, and the densities of dimethylsulfoxide (DMSO)–H₂O mixtures were measured and the excess partial molar Gibbs energies and the partial molar volumes were calculated for DMSO and for H₂O. The values of the excess partial molar Gibbs energies for both DMSO and H₂O are negative over the entire composition range. The results for the water-rich region indicated that the presence of DMSO enhances the hydrogen bond network of H₂O. Unlike monohydric alcohols, however, the solute-solute interaction is repulsive in terms of the Gibbs energy. This was a result of the fact that the repulsion among solutes in terms of enthalpy surpassed the attraction in terms of entropy. The data in the DMSO-rich region suggest that DMSO molecules form clusters which protect H₂O molecules from exposure to the nonpolar alkyl groups of DMSO.     

Spectrophotometric determination of tannins in tea and beer samples with iron(III) and 1,10-phenanthroline as reagents

A simple and accurate spectrophotometric method is proposed for the determination of tannins in tea and beer samples based on the reduction of iron(III) to iron(II) by tannins at 80 degrees C for 20 min. The iron(II) was then reacted with 1,10-phenanthroline at pH 4.4 to form a coloured complex. Background correction could be effected by precipitating the tannins in the sample solution twice with gelatin and kaolin. Absorbance measurements were made at 540 nm and the calibration graph was linear from 0 to 5.5 micrograms ml-1 of tannic acid with a slope of 0.213 A p.p.m.-1. The precision for the determination of tannins in a tea sample containing 9.45% of tannins was 1.8%. Most of the ingredients commonly found in tea and beer samples do not interfere with the determination. Several tea and beer samples were analysed for their tannin content using the proposed method.