Differential determination of arsenic(III) and total arsenic using flow injection on-line separation and preconcentration for graphite furnace atomic absorption spectrometry

Arsenic(III) can be quantitatively extracted using sodium diethyldithiocarbamate (NaDDTC) as the complexing agent and C18 reversed phase packing as the column material for solid phase extraction. Arsenic(V) must be reduced to its trivalent oxidation state prior to extraction. A mixture of sodium sulphite, hydrochloric acid, sodium thiosulphate and potassium iodide was found to be optimum for on-line reduction. When the sorbent extraction is carried out without and with the addition of the reduction mixture, arsenic(III) and total arsenic can be determined sequentially by graphite furnace atomic absorption spectrometry with detection limits (3 σ) of 0.32 ng for As(III) and 0.43 ng for total arsenic. A 7.6-fold enhancement in peak area compared to direct injection of 40 μl samples was obtained after 60 s preconcentration. Results obtained for sea water standard reference materials, using aqueous standards for calibration, agree well with certified values. A precision of 5.5% RSD was obtained for total arsenic in a sea water sample (1.65 As). Results obtained for synthetic mixtures of trivalent and pentavalent arsenic agreed well with expected values.     

Multi-cracks problem for piezoelectric materials strip subjected to dynamic loading

This paper analyses and models the dynamic interaction among permeable multi-cracks in a piezoelectric strip under anti-plane shear waves by the Schmidt method. The Fourier transform is applied and then two pairs of triple integral equations can be solved using the Schmidt method. The results show that the stress and the electric displacement intensity factors of cracks depend on not only the crack length and the piezoelectric coefficient, but also the thickness of the piezoelectric strip, the distance between multi-cracks and the frequency of incident wave.     

脉冲功率器件直流和动态热特性探测

介绍了针对影响微波脉冲功率器件可靠性的热性能问题，应用红外热分析技术。对比探测微波脉冲功率器件在动态和直流状态下的温度分布，峰值结温，热阻及其变化规律。     

基于变芯径光纤的光学系统在光造型中的应用

光学系统采用变芯径光纤，可大幅度提高光的传输效率，增加光学子系统柔性。描述了光造型工作原理及其理论依据，在介绍所研制的光的成型系统光学子系统的基础上，阐述了紫外光源的选择与设计，及变芯径光纤的设计、传输、耦合与聚焦等技术。该套基于变芯径光纤的光学子系统成本低、体积小、效率高，巳成功应用于所研制的台式低成本快速成型系统中，为该系统的进一步推广奠定了技术基础。     

赝标介子的唯象模型（I)

本文基于场论中的旋量一旋量Bethe-Sapeter 方程(以下简称B-S 方程), 提出了一种满足相对论协变性要求的强子间的唯象平底势.并计算得到了在动量中的O-介子波函数. 关键词：     

从江苏苏南数字微波线路看广播电视专用网发展前景

新建微波干线电路采用高质量的数字微波设备是广电部科技工作会议的精神之一。本文介绍了江苏苏南数字微波线路，并从方案确定、技术实现、设备选型等方面进行分析比较，从而得到一个合理的整体方案。本文还着重阐述了数字传输的关键设备－编码器的现状与发展趋势，提出广播电视专用网多功能应用的设想。     

K0.9Li0.1（Ta0.5Nb0.5）O3晶体压电应变系数的测量

用准静态ｄ＿（３３）测量仪和干涉法相结合。测量了Ｋ＿（０．９）Ｌｉ＿（０．１）（Ｔａ＿（０．５）Ｎｂ＿（０．５）Ｎｂ＿（０．５））Ｏ＿３晶体的压电应变系数。结果为：ｄ＿（３３）＝８６．０，ｄ＿（３３）＝一２９．５，ｄ＿（１５）＝１１２．９×１０￣（－１２）Ｃ／Ｎ．     

广义Hénon映射的滑模变结构控制同步

基于可线性化的非线性离散变结构跟踪控制方法实现了广义Hénon映射混沌系统的同步.广义Hénon映射的混沌吸引子比Hénon映射的混沌吸引子要复杂得多,对于保密通信来说,这种复杂性正是所期望的.提出的同步方法允许参数有适当的失配程度,这对工程实现是非常有利的,理论分析和仿真结果证实了该方法的有效性 关键词： 广义Hénon映射 混沌 同步 变结构控制     

The cyclotron autoresonance maser with a large-orbit electron ring in a dielectric-loaded waveguide

The cyclotron autoresonace maser with a large-orbit electron ring in a dielectric-loaded waveguide has been analyzed. The stability properties are investigated self-consistently on the basis of the linearized Vlasov-Maxwell equations. The numerical results show the growth rate increases when the electron rotating ratio increases. And the dielectric liner can greatly reduce the energy of the electron beam.     

准最佳二进阵列偶

本文在最佳二进阵列、准最佳二进阵列和最佳二进阵列偶的基础上,定义了一种新的最佳信号,即准最佳二进阵列偶.讨论了准最佳二进阵列偶的体积、变换性质,并对其进行了Fourier频谱分析,得到了部分有益的结果.还用计算机穷举搜索出了体积从2~24的准最佳二进阵列偶.