Lipase-catalyzed enantioselective esterifications using different microemulsion-based gels

Chiral esters with high optical purity have been synthesized at 298.2 K from racemic 2-octanol and alkanoic acids using the commerical lipases fromChromobacterium viscosum (CV) orCandida sp. (SP 525) immobilized in microemulsion-based gelatin gels. The microemulsions consisted of water and alkanes stabilized by the anionic surfactant sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (AOT) and the naturally occurring zwitterionic surfactant soybean lecithin, respectively. The enzymes were solubilized both in water-in-oil (W/O) microemulsions and in microemulsions with a bicontinuous structure. Different microstructures of the gels were chosen since the enzyme may undergo conformational changes in different environments resulting in different catalytic efficiencies toward competing substrates. Therefore, it is of great fundamental interest to know the phase behaviour and the microstructures of the used microemulsion systems. Phase diagrams were determined at 298.2 K for the systems water-hexane-AOT and ethanol/water (11)-hexadecane-soybean lecithin. The former system exhibited a large one-phase W/O microemulsion region, while in the latter a small one-phase region with bicontinuous structure was present. The kinetic enantiomeric ratios (E-values), as determined from enantiomeric excess (e.e.) values at a conversion below 0.5, were higher both in the W/O microemulsion as well as in the bicontinuous microemulsion using the SP 525 lipase, than using the CV lipase. On the other hand, the conversions were higher using gels based on W/O microemulsions (AOT stabilized) than using gels based on microemulsions with a bicontinuous structure (lecithin stabilized).     

Incremented alkyl derivatives enhance collision induced glycosidic bond cleavage in mass spectrometry of disaccharides

Electrospray ionization and collision induced dissociation on a triple quadrupole mass spectrometer were used to determine the effect of spatial crowding of incremented alkyl groups of two anomeric pairs of peralkylated (methyl to pentyl) disaccharides (maltose/cellobiose and isomaltose/gentiobiose). Protonated molecules were generated which underwent extensive fragmentation under low energy conditions. For both the 1 --> 4 and 1 --> 6 alpha and beta isomers, at comparable collision energies the methyl derivative exhibited the least fragmentation followed by ethyl, propyl, butyl, and pentyl. Collision energy is converted to rotational-vibrational modes in competition with bond cleavage, as represented by the slope of product/parent ion (D/P) ratio versus offset energy. Variable rotational freedom at the glycosidic linkage with incremented alkyl groups is hypothesized to be responsible for this effect. Discrimination of anomeric configuration was also assessed for these stereoiosmeric disaccharides. A systematic study showed that an increasing discrimination was attained for the 1 --> 4 isomeric pair as the size of the derivative increased from methyl to pentyl. No anomeric discrimination was attained for the 1 --> 6 isomeric pair. Parent and product ion scans confirmed the consistency of fragmentation pathways among derivatives. Chem-X and MM3 molecular modeling programs were used to obtain minimum energy structures and freedom of motion volumes for the permethylated disaccharides. The modeling results correlated with the fragmentation ratios obtained in the mass spectrometer giving strong indication that the collision induced spectra are dependent on the freedom of rotational motion around the glycosidic bond.     

Surface characterization of unbleached kraft pulps by means of ESCA

The effect of digestion conditions (amount of effective alkali, digestion time) on the surface compositions of unbleached softwood (Pinus sylvestris) kraft pulp has been investigated by electron spectroscopy for chemical analysis (ESCA). The quantities monitored were the angular dependence of the total O/C ratio, the relative amounts of carbons in different states of oxidation and the adsorption of Al and Ca ions to the carboxyl groups in the surface. Examination of the angular dependence of ESCA intensities shows that the concentration of alkyl carbon is high in a very thin surface layer and that it decreases linearly with decreasing kappa number. The concentration of alkyl carbon is decreased by extraction of the fibres with dichloromethane, but the amount remaining in the surface after extraction still decreases linearly with decreasing kappa number (i.e. it decreases with increasing digestion time). It is suggested that the observed enrichment of alkyl carbon in the outermost surface layers most probably is due to reprecipitation of lignin. In pulp that has not been extracted, there is also strong enrichment of extractives in the surface. This amount increases with increasing effective alkali but is relatively independent of digestion time. ESCA analysis of the Al and Ca bound to the carboxyl groups shows that the amount depends on digestion time; the results are consistent with the notion that the reprecipitated lignin contains carboxyl groups.     

Significant immunological cross-reactivity of plant glycoproteins

Plant glycoproteins generally cross-react because of the presence of identical or related complex glycans which are highly immunogenic. The use of mild periodate oxidation of glycans after glycoprotein transfer from sodium dodecyl sulfate-polyacrylamide gel electrophoresis gels to nitrocellulose membranes prior to immunodetection is a way of identifying the carbohydrate antigenic determinants of a glycoprotein as the basis for antigenic cross-reaction. Periodate oxidation can distinguish between antibodies directed against carbohydrate and against peptide antigenic determinants, the latter being unaffected by oxidation. Immunoblotting performed after periodate treatment allows the detection of common protein epitopes.     

The Effect of Chemical Reducing Agents in the Synthesis of Sol-Gel Ru-Sn Catalysts: Selective Hydrogenation of Cinnamaldehyde

The influence of chemical reduction on the properties of bimetallic Ru-Sn/SiO₂ catalyst was studied. Prepared sol-gel catalysts were reduced by NaBH₄, KBH₄, H₂, and CH₂O. Physical and catalytic properties of reduced catalysts were compared to non-reduced ones in the liquid-phase hydrogenation of cinnamaldehyde. The influence of boron impregnation was investigated. The observed hydrogenation activity and selectivity towards cinnamylalcohol were effected by reduction pretreatment. The NaBH₄ reduced catalyst exhibited the highest activity and selectivity. Reduction pretreatment influenced the pore sizes, active metal surface as well as content of carbon impurities. Traces of the reduction agents were detected in the catalysts. Boron impregnation presumably improved the catalyst activity, but had a minor effect on the selectivity.     

Morphology of dry lignins and size and shape of dissolved kraft lignin particles by X-ray scattering

Lignin is a highly branched polymer consisting of phenylpropane units, and it is one of the ingredients of the supporting matrix in plant cell walls. The morphology of several lignins extracted from plant cell walls using different methods was studied by small-angle and ultra-small-angle X-ray scattering. A power-law type intensity was observed for the dry lignins, but on the basis of the power-law exponent the fractal approach often applied to lignins is not fully justified. However, the intensity of kraft lignin did show a power law with surface fractal dimension D(s) = 2.7 +/- 0.1. The specific surface area of the lignins ranged from about 0.5 to 60 m(2)/g with 20% relative accuracy. The radius of gyration was determined from small-angle X-ray scattering data for aqueous solutions of kraft lignin. The shape of the particles in NaCl and NaOH solutions was found to be elongated. The particles were about 1-3 nm thick, while the length (5-9 nm) depended on the solvent and on the lignin concentration. The size of these primary particles was approximately the same as the size of the pores in the fractal aggregates of the dry kraft lignin. Their size was determined to be about 3.5 nm.     

Perfect and nearly perfect silsesquioxane (SQs) nanoconstruction sites and Janus SQs

Cubic silsesquioxanes (SQs) offer perfect and nearly perfect 3-D symmetry with eight functional groups with each functional group occupying a different octant in Cartesian space. This paper is concerned with the synthesis of both highly symmetrical octa-monofunctional SQs and statistically bifunctional SQs wherein because of similar properties each functionality separates to one side of the cubically symmetric SQ giving Janus-like behavior. In the latter case we find these materials to offer novel properties of use in making both coatings with controlled contact angles ranging from 50–120 °C, with hardnesses (pencil) as high as 6H and the opportunity to make layer-by-layer coatings.