宽带被动导引头天线系统性能分析

详细讨论了宽带被动导引头中的关键部件－超宽频带天线的性能，并在此基础上分析了三种具备大视角特性的被动测角方法。由于宽带天线没有确定的相位中心，因此不能采用通常的振幅和差式单脉冲法进行宽频带测角。本文提出的波束运算网络可用于一个宽带螺旋天线同时得到两个交叉波束的振幅－振幅式单脉冲系统中。此外，对比幅相干测向法中的测角模糊问题也进行了研究。     

Co-doped In2O3 thin films: Room temperature ferromagnets

Laser-ablated Co-doped In₂O₃ thin films were fabricated under various growth conditions on R-cut Al₂O₃ and MgO substrates. All Co:In₂O₃ films are well-crystallized, single phase, and room temperature ferromagnetic. Co atoms were well substituted for In atoms, and their distribution is greatly uniform over the whole thickness of the films. Films grown at 550 °C showed the largest magnetic moment of about 0.5 μ_B/Co, while films grown at higher temperatures have magnetic moments of one order smaller. The observed ferromagnetism above room temperature in Co:In₂O₃ thin films has confirmed that doping few percent of magnetic elements such as Co into In₂O₃ could result in a promising magnetic material.     

Characteristics of Schottky Barrier Junction Based on Hexagonal Microtube ZnO

Hexagonal microtube ZnO was firstly grown on single crystal p-Si (111) substrates by hydrothermal method, and fabricated Ag/n-ZnO and Au/n-ZnO Schottky junction. Schottky effective barrier heights were calculated by I-V measurement. It is confirmed that the presence of a large amount of surface states related possibly to lattice imperfections existed near the surface leads to the pinning of the surface Fermi level at 0.35 eV below the conduction-band edge. Then the fabricated Schottky barrier junctions are evaluated for their use as UV photodetectors.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Closed-form solutions for one-dimensional inhomogeneous anisotropicmedium in a special case. I. Direct scattering problem

An analytical formulation is presented for the direct scattering problem of one-dimensional (1-D) inhomogeneous anisotropic medium in a special case. This method gives nonlinear differential equations for the reflection coefficients of the anisotropic medium. Applying the discontinuity condition of the dielectric parameters at the interface of the medium with free space, approximate closed-form solutions for the reflection coefficients are obtained. Numerical examples show the validity of the method     

浅议物理实验教学环节改革

为进一步提高大学物理实验的教学质量，本文就实验课的预习、操作、实验报告的撰写及考核方法进行了探讨。     

Applications of Soliton Transmission Control in Optimal Design of Long－Haul Soliton Communication System

ＡｐｐｌｉｃａｔｉｏｎｓｏｆｃｈａｏｓｉｎｓｐｒｅａｄｓｐｅｃｔｒｕｍｃｏｍｍｕｎｉｃａｔｉｏｎｓＡｐｐｌｉｃａｔｉｏｎｓｏｆＳｏｌｉｔｏｎＴｒａｎｓｍｉｓｓｉｏｎＣｏｎｔｒｏｌｉｎＯｐｔｉｍａｌＤｅｓｉｇｎｏｆＬｏｎｇ－ＨａｕｌＳｏｌｉｔｏｎＣｏｍ...     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.     

A highly sensitive and rapid assay for protein determination in human urine and penicillin using a Rayleigh light-scattering technique with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt.

A simple and sensitive method was conducted for the determination of trace amounts of proteins with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt (azophloxine, AP) using a Rayleigh light-scattering (RLS) technique. At pH 2.60 and in the presence of an emulsifier OP microemulsion, the RLS of AP can be greatly enhanced by proteins, owing to the interaction between AP and protein. The enhanced intensity is proportional to the concentration of proteins. Four proteins, including bovine serum albumin (BSA), human serum albumin (HSA), lysozyme (Lys) and gamma globulin (gamma-G) have been tested. For example, the linear range of BSA was 0 - 0.06 microg mL(-1) with detection limits of 2.38 ng mL(-1). The method was applied to the analysis of protein in human urine and penicillin samples with satisfactory results. The relative standard deviation was in all instances less than 4.0%, and the recovery was in the range of 97.5 - 104%.