Application of microwave digestion to the preparation of sediment samples for arsenic speciation

Several extraction procedures are described allowing arsenic speciation in sediments. The extraction of organometallic compounds such as dimethylarsinic acid or monomethylarsonic acid is quite simple since these compounds are stable in the different extraction media (HCl/ HNO₃, H₃PO₄, ammonium oxalate) and are easily released independent of the extraction mode (magnetic stirring or microwave solubilization). Extraction yields are higher than 96% for these two arsenic forms. An HCl/HNO₃ microwave solubilization procedure allows the quantitative solubilization of mineral arsenic, but the differentiation between the two oxidation states is not possible owing to the oxidation of As(III) to As(V). Extractions with orthophosphoric acid or ammonium oxalate allow the solubilization of mineral arsenic with extraction yields ranging from 90 to 95% and the differentiation between As(III) and As(V). Nevertheless, the amount of As(III) is underestimated owing to its partial oxidation. The usefulness and advantages of microwave solubilization compared with conventional extraction procedures are discussed. Received: 17 May 1996 / Revised: 19 September 1996 / Accepted: 25 September 1996     

腔靶等离子体辐射温度空间分布测量

本文描述了用膜吸收法测量激光等离子体辐射温度空间分布的原理和方法给出了柱形缝靶轴向辐射温度随空间位置变化的特征,对测量结果进行了分析讨论。     

Adaptation of an echelle spectrograph to a large CCD detector

A broad range echelle spectrograph with a CCD matrix detector is developed for different applications in atomic spectroscopy. The compact optical design in combination with a dispersive entrance slit illumination offers a low stray light level and high throughput in the UV spectral region comparable only with spectrographs of higher focal length. Ray tracing calculations for typical wavelengths and the multi-line spectrum of an iron arc show the excellent overall spectrum quality. The subtraction of two partial spectra of different steel alloys demonstrates the spectra evaluation possibilities of the CCD spectrograph.     

Analysis and implementation of cross sync period underwater acoustical positioning techniques for underwater targets

I.IlltroductionWhenanactiveunderwateracousticalpositioningsystemissearchingforanunderwatertarget,itisnecessaryforittocompleteatransmittingandreceivingcycIewithineachworkingperiodinordertofindoutthelocationofthetargetcorrectly.Forexample,whenanunder-wateracoustica1synchronouspositioningsystemistrackinganunderwatertargetwithagivensynchr0nizingperiod,thepropagati0ntimeofthepositioningsignaltravellingfr0mthetaJrgettothearrayofthesystemshouldbelessthanthesynchronizingperiod0therwisetargetdis-tance…     

Parallel reduced area multipliers

As developed by Wallace and Dadda, a method for high-speed, parallel multiplication is to generate a matrix of partial products and then reduce the partial products to two numbers whose sum is equal to the final product. The resulting two numbers are then summed using a fast carry-propagate adder. This paper presents Reduced Area multipliers, which employ a modified reduction scheme that results in fewer components and less interconnect overhead than either Wallace or Dadda multipliers. This reduction scheme is especially useful for pipelined multipliers, because it minimizes the number of latches required in the reduction of the partial products. The reduction scheme can be applied to either unsigned (sign-magnitude) or two's complement numbers. Equations are given for determining the number of components and a method is presented for estimating the interconnect overhead for Wallace, Dadda, and Reduced Area multipliers. Area estimates indicate that for non-pipelined multipliers, the reduction in area achieved with Reduced Area multipliers ranges from 3.7 to 6.6 percent relative to Dadda multipliers, and from 3.8 to 8.4 percent relative to Wallace multipliers. For fully pipelined multipliers, the reduction in area ranges from 15.1 to 33.6 percent relative to Dadda multipliers, and from 2.9 to 9.0 percent relative to Wallace multipliers.     

多孔硅制备过程中B,P杂质原子的作用

采用DV-Xα方法对多孔硅形成过程中位于表层的B和P杂质原子的作用进行研究,结果表明位于顶层硅原子层中的B和P杂质原子均可削弱其邻近的Si-Si键强度,因而可能导致出现腐蚀的突破点,再通过分析杂质对表面区势场的改变,可以认为位于顶层硅原子层中的B杂质原子产生腐蚀的突破点的可能性更大。 关键词：     

波束扫描合成孔径雷达成像处理

本文主要研究了滤束扫描合成孔径雷达的杨像处理方法，分析了ＳＣＡＮＳＡＲ的工作原理、信号格式、信号结构和信号参数限制，成像处理算法包括块数据成像算法和块图像拼接算法两部分，频谱分析法和时域频域混合相关法被用于数据成像，块图像的拼接是利用时间有系剪裁块图像再顺次拼接，计算机仿真验证了本文提出的ＳＣＡＮＳＡＲ信号格式和成像算法的可行性。     

On the Realization of Current－Mode Continuous－Time Operational Transconductance Capacitance Filter

ＯｎｔｈｅＲｅａｌｉｚａｔｉｏｎｏｆＣｕｒｒｅｎｔ－ＭｏｄｅＣｏｎｔｉｎｕｏｕｓＴｉｍｅＯｐｅｒａｔｉｏｎａｌＴｒａｎｓｃｏｎｄｕｃｔａｎｃｅＣａｐａｃｉｔａｎｃｅＦｉｌｔｅｒ￥ＧｕｏＪｉｎｇｂｏａｎｄＨａｎＱｉｎｇｑｕａｎ（ＣｈａｎｇｃｈｕｎＰｏｓ...     

适合航天电子系统应用的DC－DC变换器

讨论了航天ＤＣ－ＤＣ混合集成电路的拓朴结构。通过对几种电路的性能比较，提出了适合航天应用的ＤＣ－ＤＣ变换器的最佳拓朴结构。论述了ＰＷＭ－ＬＩＮ变换器的控制方法，该方法对于确保二次稳压ＤＣ－ＤＣ变换器较高的效率具有重要意义，亦可大大提高混合集成电路的成品率。     

1μm宽硅深槽刻蚀技术

介绍了硅深槽刻蚀的基本原理和影响刻蚀效果的几个主要工艺因素。提出了一种实现１μｍ宽的硅深槽刻蚀工艺途径；并给出了１μｍ宽、８μｍ深、侧壁及底部光洁的硅深槽刻蚀工艺条件。