Excited-state intramolecular proton transfer in o-hydroxybiaryls: a new route to dihydroaromatic compounds

An excited-state intramolecular proton transfer (ESIPT) from the phenol OH to the 7'-carbon on the naphthyl ring in o-(1-naphthyl)phenol (3) and 1-(1'-naphthyl)-2-naphthol (4) leads to efficient (Phi = 0.1-0.2) formation of the corresponding dihydrobenzoxanthenes (5 and 7) via quinone methide intermediates. This new reaction represents a clean, efficient, and high-yielding route to benzoxanthenes and dihydrobenzoxanthenes. A related ESIPT of similar efficiency has been detected at the 2'-aromatic position in these systems, by deuterium labeling studies.     

染料分子对硫纳米微粒共振散射光谱的影响

在聚丙烯酰胺存在下液相硫纳米微粒在 470nm处产生 1个强共振散射峰 ;在可见光范围内无吸收峰且吸收值较小。硫微粒质量浓度在 0 0 5～ 1 0mg/L范围内与I4 70nm间有良好线性关系。研究了乙醇、丙酮 ,以及溴酚蓝、溴甲基紫、结晶紫、亮绿等有机染料对硫纳米微粒共振散射的影响。结果发现 ,染料分子吸收是产生共振散射峰的一个重要原因 ;随着染料分子非辐射吸收值的增大 ,硫纳米微粒共振散射光强度降低。实验证明 ,溴酚蓝浓度在 0～ 1 0× 10 -5mol/L范围内 ,在溴酚蓝最大吸收波长 5 90nm处的ΔI590nm与溴酚蓝浓度呈线性关系。     

Alternating DNA and pi-conjugated sequences. Thermophilic foldable polymers

Foldable polymers with alternating single-strand deoxyribonucleic acid and planar conjugated organic perylene tetracarboxylic diimide units were found to self-organize into loosely folded nanostructures. Upon heating, the loosely folded structures become more ordered as evidenced by pi-stacking in the perylene segments. The folding and unfolding processes driven by the molecular interactions of adjacent perylenes were monitored in both aqueous and organic solutions. Heat-promoted folding, or inverse temperature behavior, which originates from positive enthalpy changes, was only observed in water. Therefore, we attributed this inverse temperature dependence to hydrophobic effects rather than pi-pi molecular orbital overlap between the perylene planes. These findings shed light on the design of new thermophiles in protein engineering as well as the construction of macromolecular-based nanodevices with actuator and sensory properties.     

Genetic differentiation and subspecies development of the giant panda as revealed by DNA fingerprinting

Over the last 100 years giant pandas (Ailuropoda melanoleuca) have been separated into six completely isolated mountain ranges. DNA fingerprinting revealed different differentiation patterns in giant pandas, including early-stage, late-stage, recent divergence and recent genetic depression. A separation around 10 000 years ago resulted in highly significant differences in DNA fingerprints and morphological characteristics between Qinling and Sichuan populations. Supported by morphological differences, the genetic data were used to classify the Qinling population as a new subspecies, A. m. qinlingensis, while the Sichuan populations were classified into the original subspecies, A. m. melanoleuca. Thus, the Qinling population deserves management as a separate unit. In the Sichuan populations, two management units were defined, including Qionglai-Minshan and Daxiangling-Xiaoxiangling-Liangshan. Our data suggest urgent measures are needed to establish green corridors between subpopulations in each mountain range to increase gene flow and genetic variation to ensure long-term survival.     

解耦双回路气化系统中生物质催化水蒸气气化制富氢气体

为强化生物质气化过程中焦油转化和氢气富集,提出了一种新型解耦双回路气化系统(DDLG) 。该气化系统将气化过程解耦为燃料气化、焦油重整和半焦燃烧三个子过程,分别发生于三个独立的反应器,即气化反应器、重整反应器和燃烧反应器。其中,气化反应器和重整反应器并行布置,分别与燃烧反应器相连,形成两个平行的且可独立控制的双循环回路。以松木屑为原料及兼作为原位焦油重整催化剂的煅烧橄榄石为循环固体热载体,考察了反应条件对 DDLG 中松木屑气化性能的影响。结果表明,重整反应器从气化反应器中解耦,并辅以橄榄石催化剂,可实现焦油高效转化脱除。如气化反应器700℃、重整反应器 850℃和水蒸气与原料中碳的质量比(S/C) 1.2 反应条件下,产品气中焦油含量降低至13.9g /m~3,气体产率和H_2分别达到1.0m~3 /kg,和38.8%。     

理工科专业基础核心课程思政教学实践——以化工原理课程为例

The principles of chemical engineering is the foundation of chemical engineering professional core courses. This article introduces the goal and content of course Ideology and politics for principles of chemical engineering course. Ideological education has been carried out on the teachers' quality, knowledge, cases, historical personages, and teaching practice to provide reference for education in science and engineering course.     

骨架非稠合的电子受体在聚合物太阳能电池中的应用

Non-fullerene electron acceptors have attracted enormous attention of the research community owing to their advantages of optoelectronic and chemical tunabilities for promoting high-performance polymer solar cells (PSCs). Among them, fused-ring electron acceptors (FREAs) are the most popular ones with the good structural planarity and rigidity, which successfully boost the power conversion efficiencies (PCEs) of PSCs to over 14%. In considering the cost-control of future scale-up applications, it is also worthwhile to explore novel structures that are easy to synthesize and still maintain the advantages of FREAs. In this work, we design and synthesize a new electron acceptor with an unfused backbone, 5, 5'-((2, 5-bis((2-hexyldecyl)oxy)-1, 4-phenylene)bis(thiophene-2-yl))bis(methanylylidene)) bis(3-oxo-2, 3-dihydro-1H-indene-2, 1-diylidene))dimal-ononitrile (ICTP), which contains two thiophenes and one alkoxy benzene as the core and 2-(3-oxo-2, 3-dihydroinden-1-ylidene) malononitrile (IC) as the terminal groups. The synthetic route to ICTP involves only three steps, with high yields. Density functional theory calculations indicate that the non-covalent interactions, O…H and O…S, help reinforce the space conformation between the central core and the terminals. ICTP shows broad and strong absorption in the long-wavelength range between 500 and 760 nm. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of ICTP were measured to be -5.56 and -3.84 eV by cyclic voltammetry. The suitable absorption and energy levels make ICTP a good acceptor candidate for medium bandgap polymer donors. The best devices based on PBDB-T:ICTP showed a PCE of 4.43%, with an open circuit voltage (V_OC) of 0.97 V, a short circuit current density (J_SC) of 8.29 mA∙cm^-2, and a fill factor (FF) of 0.55, after adding 1% 1, 8-diiodooctane (DIO) as the solvent additive. Atomic force microscopy revealed that DIO could ameliorate the strong aggregation in the blended film and lead to a smoother film surface. The hole and electron mobilities of the optimized device were measured to be 9.64 and 2.03 × 10^-5 cm²∙V^-1∙s^-1, respectively, by the space-charge-limited current method. The relatively low mobilities might be responsible for the moderate PCE. Further studies can be performed to enlarge the conjugation length by including more aromatic rings. This study provides a simple strategy to design non-fullerene acceptors and a valuable reference for the future development of PSCs.     

超声引导椎旁神经阻滞治疗带状疱疹后遗神经痛的疗效及可行性分析

本文对超声引导椎旁神经阻滞治疗带状疱疹后遗神经痛（post-herpetic neuralgia，PHN）的疗效及可行性进行了分析。研究对象为2015年12月~2017年12月于我院就诊的94例PHN患者，按就诊顺序随机均分为两组，对照组给予普瑞巴林常规治疗，观察组在此基础上联合超声引导椎旁神经阻滞治疗，连续治疗4周。本文比较了治疗前、治疗1周、2周、4周后的匹兹堡睡眠质量指数（PSQI）评分、疼痛视觉模拟（VAS）评分，并评价了治疗后的综合疗效，记录了治疗期间发生不良反应情况。结果显示，较治疗前，治疗1周、2周、4周后两组VAS评分均逐渐降低，且观察组治疗后各时间点的VAS评分显著低于对照组，差异具有统计学意义（P<0.05）；较治疗前，两组治疗1周、2周、4周后PSQI评分均逐渐降低，且观察组治疗后各时间点的PSQI评分显著低于对照组，差异具有统计学意义（P<0.05）；观察组治疗总有效率为89.36%，对照组为78.72%，观察组显著高于对照组，差异具有统计学意义（P<0.05）；两组治疗期间各项不良反应发生率差异无统计学意义（P>0.05）。本文证实了超声引导椎旁神经阻滞治疗PHN能显著改善患者神经疼痛症状，提升睡眠质量，同时具有安全性保障。     

脊椎状NiCo2O4纳米棒的制备及其析氧和氧还原性能研究

以水热法并进一步焙烧合成脊椎状NiCo₂O₄纳米棒,通过透射电子显微镜（TEM）、X射线衍射仪（XRD）、X射线光电子能谱仪（XPS）和热重分析仪（TG）等来表征其结构形态及热稳定性.采用线性扫描法（LSV）、循环伏安（CV）研究所制备催化剂的在玻碳和旋转圆盘电极上的电催化活性：在0.1 mol·L^-1 KOH溶液中的电催化析氧反应（OER）和电催化氧还原反应（ORR）.研究结果表明,所制备的脊椎状NiCo₂O₄纳米棒有大量的不饱和态,200℃焙烧制备的脊椎状NiCo₂O₄纳米棒析氧过电位最小可达309 mV,Tafel斜率145.6 mV/dec,其氧还原极限电流密度在1600 rmp可达到5.095 mA·cm^-2,电子转移数在3.2~3.8之间,接近四电子转移机理,其优良电化学性能可能是由于暴露了更多的边缘缺陷的缘故.     

金属有机骨架及其复合材料在固相微萃取中的制备及应用

金属有机骨架材料是近几年涌现出的一类新型多功能多孔固体材料,由金属离子和有机配体自组装形成.基于其比表面积高、孔隙率大、热稳定性好和结构与功能多样化等优点,此类材料可作为潜在的吸附剂来对水体等环境污染物进行预处理分析.此外,金属有机骨架材料和不同功能材料如碳基材料、分子印迹聚合物材料以及磁性纳米粒子等组装形成的金属有机骨架复合材料,其整体性能较优于母体金属有机骨架材料.因此,金属有机骨架复合材料在样品预处理方面的应用也引起了研究者的极大兴趣和广泛关注.结合自己的研究工作,对近5年的金属有机骨架材料以及金属有机骨架复合材料,主要在固相微萃取样品预处理方面的应用进行了综述,并对其发展前景进行了展望.