Electrocatalysis of Fe-N-C Bonds Driving Reliable Interphase and Fast Kinetics for Phosphorus Anode in Sodium-Ion Batteries

Phosphorus exhibits high capacity and low redox potential, making it a promising anode material for future sodium-ion batteries. However, its practical applications are confined by poor durability and sluggish kinetics. Herein, an innovative in-situ electrochemically self-driven strategy is presented to embed phosphorus nanocrystal (≈10 nm) into a Fe-N-C-rich 3D carbon framework (P/Fe-N-C). This strategy enables rapid and high-capacity sodium ion storage. Through a combination of experimental assistance and theoretical calculations, a novel synergistic catalytic mechanism of Fe-N-C is reasonably proposed. In detail, the electrochemical formation of Fe-N-C catalytic sites facilitates the release of fluorine in ester-based electrolyte, inducing Na⁺-conducting-enhanced solid-electrolyte interphase. Furthermore, it also effectively induces the dissociation energy of the P-P bond and promotes the reaction kinetics of P anode. As a result, the unconventional P/Fe-N-C anode demonstrates outstanding rate-capability (267 mAh g⁻¹ at 100 A g⁻¹) and cycling stability (72%, 10 000 cycles). Notably, the assembled pouch cell achieves high-energy density of 220 Wh kg⁻¹.     

Implementation and decoding method of OCC system based on MIMO

The application of high-frame-rate cameras as well as the complex image processing techniques will lead to a series of problems, such as high system cost and long transmission delay. In this paper, we introduce narrow-band filtering technology to reduce the impact of optical noise and reduce the complexity of image processing from the physical level. We also introduce multiple-input multiple-output (MIMO) technology into the optical camera communication (OCC) system to increase system transmission rate, and propose a light emitting diode (LED) array decoding algorithm based on the directional projection method to reduce the system delay. By accumulating the target pixel values in each row and column of the image, the proposed method then determines the position and boundary of the detected target to distinguish the target area from the background. Experimental results indicate that the communication distance can reach up to 5.5 m without error bits detected. When the LED array at the transmitter of this system flashes at a frequency of 12 Hz, the transmission rate can reach 126.32 bit/s.     

共軛高分子的研究——Ⅲ.苯乙炔的热聚合

研究了苯乙炔在1.5,6和10小时的热聚合过程中温度对聚合物分子量的影响。所得结果表明,在150—500°的温度范围内,随着聚合温度的增高,聚合物的分子量都是逐渐降低,表明在高温时聚合物有裂解现象发生。红外光谱显示,400°所得聚合物的光谱吸收峯较之200°聚合物的为小,500°聚合物则出现无明显吸收峯的连续吸收,并且背景升高(“背景效应”)。聚合物的碳氢含量此同样随着聚合温度的升高而增大。这些结果,以及300°以上聚合物在溶液中显示明显的萤光等,被认为是表明聚苯乙炔在高温时发生结构改变,除裂解成小分子外,可能还有环化、脱氢、芳构化等发生,从而由链状结构变为稠环结构乃至三维共轭结构。 聚合物的电子自旋共振测试表明,聚苯乙炔的自由基浓度随下列顺序递增: 300°聚合物<400°聚合物<500°聚合物。     

Theoretical studies on the reaction path and dynamics of the reaction CH_3+H_2O→CH_4+OH

The reaction path, the dynamical properties along the reaction path and CVT rate constants are computed by the ab initio MO method, the reaction path Hamiltonian theory and the variational transition state theory. The results show that the effect of the electron correlation energy on activation barrier is large, the recrossing and tunneling effects exist in the reaction.     

N,N-二甲基甲酰胺中电沉积制备镁镍储氢合金

采用恒电位沉积法, 选用适宜的添加剂和络合剂, 成功地从N,N-二甲基甲酰胺(DMF)中沉积出致密的黑色Mg-Ni储氢合金膜. 并初步探讨了其共沉积机理. XRD显示沉积层中含有非晶态Mg-Ni相和微晶态Mg相. SEM图及相应能谱图分析表明合金颗粒以团聚状态存在, 合金成分不是很均匀. AAS分析表明沉积合金中Mg的原子摩尔分数达27.3%. LAND电池测试系统测得所镀合金膜的放电比容量最高为172.4 mAh/g.     

一种新型的表面声波阻抗传感器及其在液相体系中的应用

一种新型的表面声波阻抗传感器及其在液相体系中的应用姚守拙，陈康，刘德忠，聂利华（湖南大学化学化工系，长沙，４１００８２）关键词表面声波，阻抗传感器，液相应用表面声波传感器（ＳＡＷＳ）具有较高的灵敏度和检测精度，已广泛应用于气体微量组分分析、色谱检测和...     

Solid Phase Synthesis of 4H-Pyrimido[2,1-b] Benzothiazol-4-ones from Resin-Bound Cyclic Malonic Ester

The solid phase synthesis of 4H-pyrimido[2,1-6] benzothizaol-4-ones has been reported.     

THE STRUCTURAL BASIS OF THE POOR FIBRIN SPECIFICITY OF UROKINASE(Ⅰ)——KNOWLEDGE-BASED PREDICTION OF KRINGLE STRUCTURES OF UROKINASE AND ITS RELATED PROTEINS

The Kringle-1 structure of plasminogen (PGK-1), the Kringle-2 structure of tissue plasminogen activator (PAK-2) and the Kringle structure of prourokinase (UKK) has been modeled on the basis of the three-dimensional structure of Kringle-1 of prothrombin (PTK-1) at 2.8 resolution. The predicted three-dimensional structure of these Kringles shows that the binding site of PGK-1 is characterized by an apparent dipolar site, the polar parts of which are separated by a hydrophobic region. PAK-2 possesses the anionic center but has not a cationic binding center which might be provided by a guanidinium group from Arg-69 located adjacent to the Arg-71 position. UKK possesses neither the anionic binding center nor the cationic center which are probably the main reason for the poor fibrin specificity of urokinase.