Synthesis, crystal structure and magnetic properties of a novel manganese(II)-nitronyl nitroxide-azido(μ_(1,1) and μ_(1,3)) one-dimensional complex

A novel one-dimensional manganese(Ⅱ) complex containing nitronyl nitroxide radical [Mn2(IM2-py)2(Ac)2((μ1.1-N3)(μ1,3-N3) . EtOH]n was synthesized and characterized structurally and magnetically. It crystallizes in the monoclinic space group p21/n. Each Mn(Ⅱ) ion is six-coordinated in a distorted octahedral environment. The two N atoms of the nitronyl nitroxide radical and the two O atoms of acetate ligands are in the equatorial plane, whereas the two different azido bridging ligands are in trans axial position. Mn(Ⅱ) ions are linked by nitrogen atom of μ1,1-azido and oxygen atoms of two carboxy groups to form a Mn-Mn unit. Mn-Mn units are linked by azido ligands through u1,3 bridging style to form a one-dimensional chain. The compound is connected by the coordination bonds,π-π interactions and hydrogen bonds as a three-dimensional structure. Magnetic susceptibility data support that there are stronger antiferromagnetic interactions between the radical and Mn(Ⅱ) ion, weak antiferromagnetic inter     

表面活性剂模板在空气-水界面ZrO2薄膜中的稳定性

采用模板——十二烷基苯磺酸(DBS-H)在空气-水界面组装ZrO₂薄膜，研究了DBS-H在ZrO₂自组装薄膜中的水溶性、化学稳定性、热稳定性和光化学稳定性。模板的各类稳定性将直接控制ZrO₂薄膜结构，主要表现在层间距变化上。从模板与Na₂SiO₃反应的研究中获得了一种制备ZrO₂ / SiO₂复合氧化物薄膜的新方法，并推测出该复合薄膜的结构。     

丙醛的等离子体聚合以及聚合物的结构与性质初探

应用外部电容耦合式等离子体聚合方法,制得了丙醛聚合物,研究了不同的等离子体条件对丙醛的聚合行为的影响。通过元素分析、红外光谱分析、色谱-质谱联合分析、X-射线衍射、润湿性测定等手段研完发现,聚合物为无定形交联结构,表面能为41—45达因/厘米。     

聚苯乙烯键合麻黄碱-Co(Ⅱ)络合物对烯烃环氧化反应的催化作用

聚苯乙烯键合麻黄碱 Ｃｏ（Ⅱ）络合物对烯烃环氧化反应的催化作用刘庆艳刘必前何纪纲（中国科学院化学研究所北京１０００８０）关键词环氧化，分子氧，烯烃，醛，高分子催化剂烯烃的环氧化反应是将烯烃进行氧化转化的重要反应［１］．由于高分子催化剂具有与反应...     

Synthesis, Structure and Characterization of [Cu(2,2'-bpy)2][{Cu(2,2'-bpy)2}2W12O40(H2)]·4H2O

An organic-inorganic compound [Cu(2,2'-bpy)2][{Cu(2,2'-bpy)2}2W12O4o(H2)]·4H2O (Mr = 4048.00) was prepared from the hydrothermal reaction of Na2WO4·2H2O, CuCl2·2H2O,2,2'-bipyridine (2,2'-bpy) and H2O at 160 ℃ for 4 days. The compound crystallizes in the monoclinic system, space group P21/n with a = 18.9196(8), b = 20.4212(8), c = 21.8129(9)(A), β=96.992(3)°, V= 8365.0(6) (A)3, Dc= 3.214 g/cm3, Z = 4,μ(MoKα) = 17.269 mm-1 and F(000) = 7324.Of the 119837 total reflections, 17315 were unique (Rint = 0.0489). The final R = 0.0385 and wR =0.0770 for 11142 observed reflections with I ＞ 2σ(I). Single-crystal X-ray diffraction reveals that the structure is composed of [{Cu(2,2'-bpy)2}2W12O40(H2)]2- anions, discrete [Cu(2,2'-bpy)2]2 cations and lattice water molecules, and the anion is made up of a {W12O40(H2)}6- α-Keggin core decorated with two {Cu(2,2'-bpy)2}2 groups through bridging oxygen atoms.     

A New Activation Method for Electroless Metal Plating：Palladium Laden via Bonding with Self—Assembly Monolayers

A new activation method has been developed for electroless copper plating on silicon wafer based on palladium chemisorption on SAMs of APTS without SnCl2 sensitization and roughening condition.A closely packed electroless copper film with strong adhesion is successfully formed by AFM observation.XPS study indicates that palladium chemisorption occurred via palladium chloride bonding to the pendant amino group of the SAMs.     

基于弹簧管悬臂梁的FBG压力传感的研究

提出了一种等强度悬臂梁与弹簧管结合的高灵敏度的光纤布拉格光栅(FBG)压力传感器。将FBG粘贴在悬臂梁的下表面,粘贴方向与悬臂梁轴线一致。理论分析了FBG中心波长相对偏移量与压力的关系,实验测得该传感器的压力灵敏度为2.767×10-4/MPa,是裸FBG压强灵敏度系数的142倍。压力灵敏度与悬臂梁和弹簧管的几何参数有关,改变参数,可获得不同灵敏度的压力传感器。     

大功率LD封装技术的研究

提出一种新的LD列阵封装方法。把热沉形状改为台阶式，使稳态工作条件下的芯片前腔面散热速度提高，前后腔面温差大幅度降低，因此可以提高COD阈值，降低腔面退化率，且更方便于光纤耦合封装。利用Ansys软件对大功率LD稳态工作的温度分布进行模拟。结果发现：改进前的芯片前、后腔面温差为9．0K，改进后温差降为3．5K，降低了60%；热沉前、后端面的温差由原来的18．2K降为8．0K，降低了56％。     

功率型白光LED的热特性研究

大功率LED照明单元在光通量提高的同时伴随着散热，且普通功率型白光LED多采用蓝光芯片激发荧光粉的方法，随着温度的提升，荧光粉对应的波长会发生漂移。本文从功率型白光LED的发热原理出发，试验了其在脉冲源作用下，用于照明的可能性。试验表明，在此激励源的作用下，LED输出与散热很好，并从理论上进行了解释。     

环形腔高掺Er3 窄线宽光纤激光器实验研究

报道了采用光纤光栅（FBG）短直腔选频结构的环形腔窄线宽光纤激光器。采用约3m长高掺Er^3光纤，LD抽运阈值功率约为11mW，在25mW976nm有效抽运功率时输出信号功率为2．65mW，斜效率约为15％；输出激光3dB线宽小于0．01nm，20dB线宽小于0．04nm，边模抑制比（SMSR）为48dB；观察到输出信号光波长漂移范围为0．06nm。