大孔吸附树脂对邻甲酚的吸附行为研究

研究了大孔吸附树脂NDA—909吸附水溶液中邻甲酚的热力学特征，并与Amberlite XAD—4树脂进行了比较．通过吸附动力学实验，初步探讨了初始温度对吸附过程的影响。结果表明，NDA—909对邻甲酚的吸附符合Freundlich经验公式，表现为放热的物理吸附过程．此外吸附速率受颗粒内扩散和其它类型扩散的共同控制。     

Novel Poly（thienylene Ethynylene）s with Electron-accepting Groups

Since the early works of A. J. Heeger, A G. MacDiarmid and Hideki Shirakawa on semiconducting polymers, π-conjugated oligomers and polymers have been actively investigated for a variety of optoelectronic applications, such as field effect transitors (FET…     

D072型树脂脱除过氧化氢中金属阳离子的工艺研究

实验考察D072型阳离子交换树脂在交换柱中脱除过氧化氢中微量金属阳离子的动态行为．通过改变料液流速、高径比、料液中交换离子浓度及料液组成等参数，绘制不同条件下的透过曲线，以此考察D072型树脂对过氧化氢中金属阳离子的动态交换性能，从而确定适宜的工艺条件，为工业化生产提供科学依据．     

共軛高分子的研究——Ⅴ.苯腈在三氟化硼-苯甲醚絡合物作用下的聚合

近年来,对于各类主链具有共軛体系的高分子的研究进展十分迅速,但是对腈类聚合的研究,只是在最近才引起注意。1961年,等着重报导乙腈在二氯化鋅作用下的聚合,指出这是一种新型的络合物聚合。1962年,岡村等报导乙腈的輻射聚合。这些作者认为聚腈可能具有线型結构(?),因此聚腈是一类新型的共轭高分子。但是腈类的其他聚合方法以及聚合机理的研究进行尚很少,因而有必要作进一步的探索。本文报导腈类的一种新型聚合体系,郎苯腈在三氟化硼-苯甲醚络合物作用下的高温聚合,并对苯腈三聚化与聚合间的相互关系等问题进行初步探讨。     

汽车制造商分时租赁模式采用及产品线策略研究

考虑自有平台和第三方平台两种分时租赁方式,将汽车质量划分为性能质量和环境质量,构建销售模式、纯分时租赁模式和混合模式下的产品线策略模型,研究制造商产品线策略与商业模式之间的相互作用。研究发现,同品牌产品间竞争和合并效应是分时租赁模式影响产品线策略的两个关键因素。同品牌产品间竞争的加剧和合并效应的增大都会激励企业选择性能更好的车型而忽略其环境表现。分时租赁模式能同时改进利润与产品环境表现,但存在条件:当消费者价格敏感性较低时,使用成本高且合并效应小是实现同时改进的条件;当消费者价格敏感较高时,使用成本低且合并效应小则是同时改进的条件。     

光通信技术在物联网中的应用

随着物联网的快速发展,越来越多的设备和传感器连接到互联网中,构成了一个庞大的物联网生态系统。这些设备和传感器之间的通信和数据传输至关重要,而传统的无线通信方式却面临带宽、稳定性等方面的限制。基于此,文中首先简要分析了光通信技术在物联网中的应用优势,随后详细阐述了光通信技术在物联网中的具体应用,以供相关人士交流参考。     

云计算技术在区域安全通信中的应用

随着互联网技术的不断发展,网络已成为社会经济发展的重要支撑工具。然而,受限于传统通信技术的约束,网络通信信息存在被共享、泄露等风险。基于云计算技术的区域安全通信技术可以有效解决无线通信技术按身份分配不同通信权限的问题,用户拥有“普通域”与“安全域”功能,以保证通信网络的安全。文中以云计算技术的概念为切入点,阐述了云计算技术在区域通信中的应用价值,最后提出了构建基于云计算区域安全通信系统的具体方案,并通过实验验证了该系统具有良好的应用性能。     

扭曲的涡旋光束在海洋湍流中的传输因子

基于扩展惠更斯-菲涅尔原理和维格纳分布函数(Wigner distribution function,WDF)二阶矩,推导了部分相干扭曲涡旋光束(partially coherent twisted vortex beam,PCTVB)在海洋湍流中传输时的M2因子和角扩展θ(z)。通过数值模拟方法详细研究了海洋湍流对光束M2因子和角扩展θ(z)的影响,结果表明温度方差耗散率ΧT和温度盐度贡献比w越大、动能耗散率ε和各向异性因子ξ越小时对PCTVB的M2因子和角扩展θ(z)的影响越大。此外研究发现,相较于非扭曲涡旋光束(PCVB),PCTVB有更好的抗海洋湍流的能力,且增大拓扑荷数m以及扭曲因子绝对值｜μ｜后,PCTVB的M2因子和角扩展θ(z)显著减小,光束的抗海洋湍流能力增强。并且增大束腰宽度w0和波长λ,以及减小初始相干长度δηη(η=x,y)同样可以增加光束抗海洋湍流的能力。本文的数值研究结果对海洋光通信具有重要意义。     

An automatic docking method for large-scale sections based on real-time pose measuring and assembly deviation control

Aiming at the problem of poor accuracy consistency of large sections’ docking assembly, an automatic docking method using multiple laser trackers to measure the position and posture of the docking sections in real time was proposed. In the solution of the pose of the docking section, real-time pose measurement of the docking section was realized by establishing a global coordinate system and a coordinate fusion method of three or more laser trackers. In the automatic control of the docking process, the real-time communication protocol and the circular negative feedback control strategy of measurement-adjustment-re-measurement are adopted, and the fully-automated docking of large sections is realized. Finally, an experimental verification system was set up, and the docking of the large-scale section reduction models was realized under the requirements of docking accuracy, and the effectiveness of the automatic docking scheme was successfully verified.     

Implementation and decoding method of OCC system based on MIMO

The application of high-frame-rate cameras as well as the complex image processing techniques will lead to a series of problems, such as high system cost and long transmission delay. In this paper, we introduce narrow-band filtering technology to reduce the impact of optical noise and reduce the complexity of image processing from the physical level. We also introduce multiple-input multiple-output (MIMO) technology into the optical camera communication (OCC) system to increase system transmission rate, and propose a light emitting diode (LED) array decoding algorithm based on the directional projection method to reduce the system delay. By accumulating the target pixel values in each row and column of the image, the proposed method then determines the position and boundary of the detected target to distinguish the target area from the background. Experimental results indicate that the communication distance can reach up to 5.5 m without error bits detected. When the LED array at the transmitter of this system flashes at a frequency of 12 Hz, the transmission rate can reach 126.32 bit/s.