羧甲基壳聚糖对胆红素的吸附性能研究

合成了不同取代度的羧甲基壳聚糖(CM-CTS)作为吸附剂，研究了不同条件对CM-CTS吸附胆红素性能的影响．结果表明：在实验条件下，随着羧甲基取代度的增加和体系温度的升高．最大吸附率和吸附速率均相应增加：在接近人体血液pH值的条件下，CM-CTS对胆红素的吸附性能较佳：人血清白蛋白和离子强度的增加对CM—CTS吸附胆红素有明显的抑制作用。     

GIANT CELL FORMATION IN BLADDER TUMOR CELLS FOLLOWING HEMATOPORPHYRIN DERIVATIVE-SENSITIZED PHOTOIRRADIATION

Abstract— Giant cell induction was studied in cultured bladder tumor cells (MGH-Ul; commonly referred to as "EJ") following hematoporphyrin derivative (HpD)-sensitized photoirradiation. Eight days after treatment, control colonies (no treatment, HpD alone, light alone) were generally uniform in size and density and contained few giant cells. Colony heterogeneity and giant cell frequency increased with light dose in the presence of HpD. The morphology and frequency of giant cell formation, with respect to survival levels, were comparable to those observed in 280 kVp X-irradiation of the same cells.     

PRODUCTION OF LIGHTOLEFINS FROM CO_2 HYDROGENATION OVER Fe/SILICALITE-2 CATALYST Ⅱ. PROMOTION EFFECT OF MnO PROMOTER

IntroductionItilasbeenshot'-nthattileadditionofMnOpromotertoFocatal}stcanresultinaremarkableimprovementinthesclectivit}'to11ghtalkenesforCOh}!drogenationll'l.Ho-c'cvcr.thecadetofMnOonCH4formationandCOconversionisvery'ambigUouslltolMoreover.MnOpromotergrca…     

Synthesis, Structure and Characterization of [Cu(2,2'-bpy)2][{Cu(2,2'-bpy)2}2W12O40(H2)]·4H2O

An organic-inorganic compound [Cu(2,2'-bpy)2][{Cu(2,2'-bpy)2}2W12O4o(H2)]·4H2O (Mr = 4048.00) was prepared from the hydrothermal reaction of Na2WO4·2H2O, CuCl2·2H2O,2,2'-bipyridine (2,2'-bpy) and H2O at 160 ℃ for 4 days. The compound crystallizes in the monoclinic system, space group P21/n with a = 18.9196(8), b = 20.4212(8), c = 21.8129(9)(A), β=96.992(3)°, V= 8365.0(6) (A)3, Dc= 3.214 g/cm3, Z = 4,μ(MoKα) = 17.269 mm-1 and F(000) = 7324.Of the 119837 total reflections, 17315 were unique (Rint = 0.0489). The final R = 0.0385 and wR =0.0770 for 11142 observed reflections with I ＞ 2σ(I). Single-crystal X-ray diffraction reveals that the structure is composed of [{Cu(2,2'-bpy)2}2W12O40(H2)]2- anions, discrete [Cu(2,2'-bpy)2]2 cations and lattice water molecules, and the anion is made up of a {W12O40(H2)}6- α-Keggin core decorated with two {Cu(2,2'-bpy)2}2 groups through bridging oxygen atoms.     

微波大气吸收衰减特性分析及分层数值算法

 给出了微波在大气中传输受气体分子吸收导致衰减的较精确计算模型，该模型扩展了传统计算模式忽略温度、湿度、压力变化及传播距离受限制的近似算法。结合我国某地区的实测气象数据模拟计算了该地区的大气吸收衰减，最后根据数值计算结果分析了微波随频率、发射角度以及月份（季度）变化的传播特性，并简要说明了此研究在微波遥感中的实际意义。     

铜电路板缝腐蚀过程缝隙中pH、Cl-浓度分布的测量

根据铜电路板缝腐蚀特征,研制了阵列式Ag/AgCl、IrO2电极,设计缝隙腐蚀模拟装置,在0.5mol.L-1的NaCl溶液中分别同时原位检测电子线路板缝隙腐蚀过程,缝隙内的氯离子浓度分布、pH分布及其随时间的变化.研究表明,在电子线路板发生缝隙腐蚀的过程中,缝隙内部不同深度的Cl-及H+浓度逐渐增大,且随着与缝口距离的增大而增大,从而导致缝隙腐蚀不断向纵深方向发展.     

一致空间的理想导集映射

本文介绍一致空间的理想导集映射,并对这些映射的像展开研究.同时,介绍I-Hurewicz有界性的概念,研究I-Hurewicz有界性的基础拓扑运算性质.最后,得到一致空间中I-Hurewicz有界性的一个等价刻画.     

基于雾气特征与不等关系约束的去雾方法

针对现有去雾算法未充分考虑图像雾气信息、复原图像细节模糊等问题,提出一种新颖的反映图像雾信息分布的雾气特征图,并采用不等关系约束方法提高图像质量。首先,提取退化图像的极值通道以实现雾气信息的粗略估计,并通过L-1正则化对其进行优化从而得到雾气特征图。其次,提出一种基于雾气特征的初级大气光幕函数,通过对颜色通道和大气光幕作深入分析,利用均值不等式获得约束后的退化场景大气光幕。最后,利用雾气特征图对局部大气光进行改进,并基于大气散射模型实现图像去雾。将所提算法在真实雾图和合成数据集雾图上与其他经典方法进行比较分析,可以发现,所提算法在单幅图像去雾中展现了较好的性能,且在夜间雾图复原中更具优势。     

基于稠密变形场能量优化的非刚性在线体积重建方法

针对动态非刚性在线重建存在的重建漂移问题,提出了一种基于单个RGB-D传感器的稠密变形场在线融合策略,实现了对非刚性几何形状的动态重建.通过局部平滑和输入约束处理,将空间的最优变形转换为非线性正则变分优化问题,并使用数据并行闪存优化策略,以摄像机捕获速率,实现对非刚性场景的在线跟踪重建.通过实验表明,本文方法实现了对非...     

用于PDIC的跨阻放大器的优化设计

提出了一种用于PDIC的跨阻放大器.电路由三级相同的推挽放大器级联而成,每级均采用一动态电阻对负载进行补偿,以提高放大器的相位裕度.反馈电阻由一栅极受控的PMOS管替代,避免了大尺寸多晶硅电阻引入的附加相移,增加了电路的稳定性.采用XFAB 0.6μm CMOS工艺提供的PDK,在Cadence Spectre环境下进行电路设计、仿真验证.仿真结果表明,电路的增益、带宽及稳定性均得到满意结果.

Abstract：

Presented is a transimpedance amplifier for PDIC.The designed amplifier is configured on three identical push-pull amplifier stages that use an active load compensated by an active resistor to improve the phase margin of the amplifier.The feedback resistor is replaced by a PMOS transistor which is biased by the gate voltage.The replacement not only avoids the phase-shift introduced by the large ploy-resistor but improves the stability performance of the transimpedance amplifier.Based on XFAB's 0.6 μm CMOS,circuit design and simulation were performed by using Cadence Spectre.The simulation results show that the gain,bandwidth and stability of the amplifier all achieve good performance.