TD-SCDMA网络重要性浅谈

在国内4G快速发展的背景下,3G网络逐步被取代以承载移动宽带用户的数据流量,因而国内涌现了很多认为3G网络如TD-SCDMA已过时的观点,本文通过对中国移动现网用户的数据承载、自主知识产权技术积累、国内外通信体制的博弈、国内4G的发展和人才培养等方面进行分析,显示了TD-SCDMA仍发挥着重要的作用。     

单通道副瓣影响分析及抑制方法

为了抑制天线副瓣对单通道目标检测的影响,文中通过比较实测天线方向图和回波方向图的特点,提出了利用搜索目标幅度最大值和方位向滑帧统计波束宽度的方法来抑制副瓣干扰,并通过仿真分析验证了算法的有效性。     

基于支持向量机的光寻址电位传感器温度补偿研究

针对光寻址电位传感器(LAPS,light addressable potentiometric sensor)测量精度易受温度 影响的问题,提出一种基于支持向量机(SVM)的LAPS温度补偿方法。根据在多温度条件下LAP S传感 器对缓冲液pH的实测数据,利用SVM建立LAPS温度补偿模型,通 过核函数把LAPS输出饱和光电流与温度间的非线性关系映射到高维特征空间,在高维空间中 用线性回归实 现该映射的非线性处理,对LAPS的温度特性进行非线性逼近,补偿温度对LAPS输出的影响。 实验结果表 明,在(20±1)、(20±2)和(20±5) ℃温度变化情况下,经过温度补偿后LAPS系统输出 pH的标准偏差 分别为补偿前的1/3、1/4和1/6,均小于0.05pH,LAPS 温度补偿算法可以明显补偿温度影响,提高LAPS的测量精度。     

Synthesis and Application of N-Tosyl Piperidinyl-Containing α-Aminophosphonates

Abstract

A series of novel (4′-tosyl) piperidin-4-yl containing α-aminophosphonates were synthesized by a one-pot reaction, efficiently catalyzed by magnesium perchlorate, under solvent-free conditions from 1-tosylpiperidin-4-one, substituted aromatic amines, and diethyl phosphite (DEP). The synthesized compounds were characterized by IR, ¹H NMR, ¹³C NMR, ³¹P NMR, and HRMS spectroscopy. A single-crystal X-ray structure of diethyl 4-(2-chlorophenyl) amino-1-(4’-methylbezenesulfonyl) piperidin-4-yl-phosphonate (2a) was obtained, and some of the title compounds displayed insecticidal activities against Plutella xylostella.

Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfer, and Silicon and the Related Elements for the following free supplemental files: Additional figures and tables.     

Synthesis and characterization of poly(2‐methacryloyloxyethyl phosphorylcholine) onto graphene oxide

The polyzwitterionic brushes comprised of poly(2‐methacryloyloxyethyl phosphorylcholine) (pMPC) segments, which are used for surface modification of polymers and biocompatible coatings, were investigated. In this work, reverse surface‐initiated atom transfer radical polymerization (RATRP) of zwitterionic 2‐methacryloyloxyethyl phosphorylcholine (MPC) is employed to tailor the functionality of graphene oxide (GeneO) in a well‐controlled manner and produce a series of well‐defined hemocompatible hybrids (termed as GeneO‐g‐pMPC). The complexes were characterized by FT‐IR, XRD, and Raman. Results show that MPC has been coordinated on the graphene oxide sheet. Thermal stability of the nanocomposites in comparison with the neat copolymer is revealed by thermogravimetric analysis and differential thermal analysis. Scanning electron microscopy and transmission electron microscope images of the nanoconposite displays pMPC chains were capable of existing on GeneO sheet by RATRP. The biocompatibility properties were measured by plasma recalcification profile tests, hemolysis test, and MTT assays, respectively. The results confirm that the pMPC grafting can substantially enhance the hemocompatibility of the GeneO particles, and the GeneO‐g‐pMPC hybrids can be used as biomaterials without causing any hemolysis. With the versatility of RATRP and the excellent hemocompatibility of zwitterionic polymer chains, the GeneO‐g‐pMPC nanoparticles with desirable blood properties can be readily tailored to cater to various biomedical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation and Characterization of Linear and Miktoarm Star Side-Chain Liquid Crystalline block Copolymers with p-Methoxyazobenzene Moieties via a Combination of ATRP and ROP

One linear and two miktoarm star side-chain liquid crystalline (LC) block copolymers with p-methoxyazobenzene moieties were prepared by a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP) techniques. First, ROPs of ε -caprolactone (ε -CL) were carried out catalyzed by Sn(Oct)₂ using three multifunctional initiators, hydroxyethyl 2-bromoisobutyrate (AB type), 3-hydroxy-2-(hydroxymethyl)-2-methylpropyl 2-bromo-2-methylpropanoate (A₂B type) and 2,2-bis(hydroxymethyl)propane-1,3-diyl bis(2-bromo-2-methylpropanoate) (A₂B₂ type), at 110°C in toluene, respectively. Second, the previously obtained poly(ε -caprolactone)s (PCLs) with bromines functionalities were used as the macroinitiators to conduct ATRP of 6-(4-methoxy-4-oxy-azobenzene) hexyl methacrylate (MMAZO) with CuBr/PMDETA as the catalyst systems at 85°C in anisole to prepare the linear and miktoarm side-chain LC block copolymers (PCL-b-PMMAZO, (PCL)₂-(PMMAZO) and (PCL)₂-(PMMAZO)₂). The produced polymers were well-controlled with the controlled molecular weights and the relatively narrow molecular weight distributions (M _w/M _n ≤ 1.35). The structures of the obtained polymers were all characterized by NMR, FT-IR and GPC analysis. Furthermore, the LC properties of the linear and miktoarm star block copolymers were also investigated by differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM).     

Further Studies on the Anionic Copolymerization of Styrene and Glycidyl Methacrylate in Toluene

Sequential anionic copolymerization of styrene and glycidyl methacrylate (GMA) was performed with the protection of argon under normal pressure, where styrene, GMA, toluene, THF, n-butyllithium and a small amount of lithium chloride (LiCl) were used as first monomer, second monomer, solvent, polar reagent, initiator and additive, respectively. Polystyrene-b-poly(glycidyl methacrylate) diblock copolymers (PS-b-PGMA) with well-defined structure and narrow molecular weight distribution were prepared by the copolymerization reaction of poly(styryl)lithium with GMA under certain temperatures. The copolymers were characterized using gel permeation chromatography (GPC), ¹H-NMR, ¹³C-NMR, thin layer chromatography (TLC) and hydrochloric acid-dioxane argentimetric methods. The effects of additives, copolymerization temperature and THF dosage on the copolymerization were studied. No chain transfer reaction of anionic polymerization of styrene in toluene was observed. Slightly broader molecular weight distribution of PS-b-PGMA was observed with the increase the GMA repeat units. Using THF/toluene blend solvent could reduce the polydispersity index (M _w /M _n ) and dissolve the copolymer better than toluene alone. Lower temperature (< -40°C) and LiCl are required to prepare PS-b-PGMA with narrower molecular weight distribution.     

Solvent effects on radical copolymerization of acrylonitrile and methyl acrylate: solvent polarity and solvent-monomer interaction

Abstract

New insights for the effects of organic solvent polarities and solvent-monomer interactions on the radical copolymerization for an important copolymer, poly(acrylonitrile-co-methyl acrylate) (PAN-co-MA), were provided in this research. Solvents, dimethylformamide (DMF), dimethylacetamide (DMAc) and dimethyl sulfoxide (DMSO), were used as reaction media. The polarity of these solvents was in the sequence of DMAc?<?DMF?<?DMSO. By studying the reactivity ratios of AN and MA, the triad fractions of the resultant copolymers, the interactions between monomers and solvents, and the compositions of copolymers at various conversions, we concluded that the solvent polarity had minimal influence on the copolymerization of AN and MA, while the solvent-monomer interactions played important roles. The interactions between monomer-monomer, monomer-solvent, and solvent-solvent, were calculated based on quantum chemistry methods. Both theoretical calculations and experimental results suggested that AN and MA in DMSO tended to aggregate locally, while they could be homogeneously dissolved in DMAc and DMF. The interactions between solvent and monomers could cause local monomer concentration variations, or ‘bootstrap’ effect, which is one of the critical factors affecting the copolymerization process of AN and MA and the chemical structures of the resultant polymers.     

Preparation and Pervaporation Performances of PEA‐based Polyurethaneurea and Polyurethaneimide Membranes to Benzene/Cyclohexane Mixture

Pervaporation is promising in the separation of benzene/cyclohexane mixture for the petrochemical industry. Two kinds of pervaporation membrane materials, including PEA‐based polyurethaneurea (PUU) and polyurethaneimide (PUI), were successfully synthesized from the same soft segment of poly(ethylene adipate)diol (PEA) and different hard segments via a two‐step method. The hard segment of PUU was prepared from toluene diisocyanate (TDI) and 4,4′‐diaminodiphenyl methane (MDA), while that of PUI was from 4,4′‐methylene‐bis(phenylisocyanate) (MDI) and pyromellitic dianhydride (PMDA). The structures and properties of PUU and PUI were characterized by means of FT‐IR, DSC and TGA. During the pervaporation experiment, the PUI membranes had a flux of 12.13 kg µm m^?2 h^?1 and separation factor of 8.25, while the PUU membranes had a flux of 26.35 kg µm m^?2 h^?1 and separation factor of 6.29 for 50 wt% benzene in the benzene/cyclohexane mixture at 40°C. The effects of the structures of hard segments on pervaporation performances were discussed. The investigation of the relationship in molecular structure and PV performances will be helpful for the choice and design of membrane materials in the separation of benzene/cyclohexane mixture.     

Copolymerization of Carbon Dioxide and Propylene Oxide with Zinc Catalysts Supported on Carboxyl-Containing Polymers

Polymer-supported zinc catalysts were prepared by the reaction of di-ethylzinc with polymers containing carboxyl groups. The catalysts were employed in the alternating copolymerization of carbon dioxide and propylene oxide to give poly(propylene carbonate) of high molecular weight. Copolymers of styrene and acrylic acid were shown to be better catalyst supports than poly(acrylic acid) and some other polymers. Maximum activity was achieved when the molar ratio of Zn/COOH was around unity. The yield and molecular weight of the polycarbonate rose with increasing reaction time. Higher reaction rates but lower molecular weights of the product were observed at elevated reaction temperatures