微乳液法合成白光LED NaLu(MO4)2:Eu3+/Eu3+,Tb3+(M=W, Mo)荧光粉

采用微乳液法制备NaLu(WO₄)_2-x(MoO₄)x:8%Eu³⁺(x=0, 0.5, 1.0, 1.5, 2.0)/y%Eu³⁺,5%Tb³⁺(y=1, 3, 5, 7, 9)系列荧光粉.通过X射线衍射(XRD)表征,所制样品的X射线衍射峰与标准卡片PDF#27-0729基本吻合,表明所制的样品为白钨矿结构,属于四方晶系.扫描电镜SEM显示制备的纳米粒子是梭子状的,粒径大约是110 nm.激发发射光谱显示,在Eu³⁺离子掺杂浓度为8%时,NaLu(WO₄)(MoO₄):Eu³⁺发光强度最大.NaLu(WO₄)_2-x(MoO)x :8%Eu³⁺(x=0, 0.5, 1.0, 1.5, 2.0)荧光粉在Mo/W比达到1:1(x=1)时发光强度最大,强烈的红光发射表明该材料可用于白光LED材料.该荧光粉在268、394和466 nm波长光激发下分别发出橙红色、黄色和淡黄色光,可以满足不同光色需要.NaLu(WO)(MoO):y%Eu³⁺,5%Tb³⁺(y=1, 3, 5, 7, 9)荧光粉,随着y值增大,从绿光区(x=0.278, y=0.514)进入白光区(x=0.356, y=0.373), (x=0.278, y=0.313),同时观察到Tb³⁺到Eu³⁺有效能量传递.     

1H和19F NMR研究镍系催化丁二烯聚合中醇类对BF3·Oet2的增溶作用

The solubility of BF₃OEt₂ in hydrogenated gasoline was improved greatly by means of premixing BF₃OEt₂ with C₃H₁₇OH in nickel catalyst system, so that the effeciency of fluorine in the system was increased markedly. It is confirmed that there was a intermolecular hydrogen bond between alcohol and BF₃OEt₂ molecules by using ¹H NMR, which was a vital factor to lead the solubilization of BF₃OEt₂ in hydrogenated gasoline. Otherwise, the caculation formula of the chemical shift ofproton in hydroxy, ¹H = xipi,was suggested in hydrogen bond system.     

Synthesis, Characterization and Fluorescence of a One-dimensional Cadmium（Ⅱ） Compound Involving Covalent and Hydrogen Bonds

1 INTRODUCTION The rational design and synthesis of new metal- organic coordination polymers have generated con- siderable interest in supramolecular chemistry and material science owing to their intriguing structural diversities and potential applications as functional materials[1～3]. Molecular self-assembly has been pro- ved to be an efficient way to construct various inte- resting coordination polymers[4～6]. The coordina- tion covalent bond, hydrogen bond or other mole- cular interact…     

Kinetic model of induced codeposition of Ni-Mo alloys

The kinetic model of induced codeposition of nickel-molybdenum alloys from ammoniun citrate solution was studied on rotating disk electrodes to predict the behavior of the electrode-position. The molybdate (MoO42-) could be firstly electro-chemically reduced to MoO2, and subsequently undergoes a chemical reduction with atomic hydrogen previously adsorbed on the inducing metal nickel to form molybdenum in alloys. The kinetic equations were derived, and the kinetic parameters were obtained from a comparison of experimental results and the kinetic equations. The electrochemical rate constants for discharge of nickel, molybdenum and water could been expressed as k1(E) = 1. 23 × 109 CNi exp( - 0.198FE/RT) mol/(dm2·s), k2(E) =3.28× 10-10 CMoexp( - 0. 208FE/ RT) mol/(dm2·s) and k3(E) = 1.27 × 10-6exp( - 0.062FE/ RT) mol/(dm2 · s), where CNi and CMo are the concentrations of the nickel ion and molybdate, respectively, and E is the applied potential vs. saturated calomel electrode (SCE). The codeposition p     

气相色谱-正化学源-质谱联用技术测定葡萄和葡萄酒中多种唑类杀菌剂的残留量

建立了可用于葡萄和葡萄酒中20种唑类杀菌剂残留量的分散型固相萃取-气相色谱-正化学离子源质谱分析方法.葡萄和葡萄酒样品分别用乙腈(含1%冰醋酸)和乙酸乙酯提取,分散型固相萃取法净化,由气相色谱-正化学离子源质谱分时段选择离子监测技术进行测定与确证,外标法定量.20种农药在50～1000 μg/L范围内线性均良好; 所有农药的方法定量限(LOQ)均低于10 μg/kg;在3个添加水平(10, 20和40 μg/kg)下,所有农药的回收率均处于71.2%～102.2%之间, RSD≤10.6%.     

偶氮胂Ⅲ—Ba(Ⅱ)共振散射光谱法测定人血清蛋白

在pH 3.0~3.8的BR缓冲溶液中,偶氮胂Ⅲ-Ba(Ⅱ)与蛋白质结合形成复合物,导致体系的共振散射信号增强,据此建立了蛋白质测定的共振散射光谱法。结果表明,在优化的实验条件下,牛血清白蛋白(BSA)的线性范围为0~1.0 mg/L,检出限为21.4μg/L;将该法用于人血清中蛋白质的测定,与医院测定结果基本一致;方法的批内精密度为2.8%(n=6),批间精密度为3.5%(n=6),回收率为96.0%~100.0%。     

Ab Initio Study on the Mechanism of Cycloaddition Reaction between Silylene Carbene （H_2Si=C：） and Acetone

The mechanism of cycloaddition reaction between singlet silylene carbene and acetone has been investigated with CCSD(T)//MP2/6-31G method. From the potential energy profile, it can be predicted that the reaction has two competitive dominant reaction pathways. One consists of two steps: (1) the two reactants (R1, R2) firstly form a four-membered ring intermediate (INT4) through a barrier-free exothermic reaction of 585.9 kJ/mol; (2) Then intermediate (INT4) isomerizes to CH3-transfer product (P4.1) via a transition state (TS4.1) with energy barrier of 5.3 kJ/mol. The other is as follows: on the basis of intermediate (INT4) created between R1 and R2, intermediate (INT4) further reacts with acetone (R2) to form the intermediate (INT5) through a barrier-free exothermic reaction of 166.3 kJ/mol; Then, intermediate (INT5) isomerizes to a silicic bis-heterocyclic product (P5) via a transition state (TS5), for which the barrier is 54.9 kJ/mol. The presented rule of this reaction: the [2+2] cycloaddition effect between the π orbital of silylene carbene and the π orbital of π-bonded compounds leads to the formation of a four-membered ring intermediate (INT4); The unsaturated property of C atom from carbene in the four-membered ring intermediate (INT4) results in the generation of CH3-transfer product (P4.1) and silicic bis-heterocyclic compound (P5).     

两种水产品中农药多残留分析的样品前处理方法及其在111种农药和相关化学品残留同时检测中的应用

建立了两种针对水产品中农药多残留分析的快速样品前处理方法,并将其应用于111种农药及相关化学品残留检测。在样品前处理方法Ⅰ中,样品经丙酮-乙酸乙酯-正己烷(体积比为1∶1∶1)混合溶剂提取,乙腈转溶;在样品前处理方法Ⅱ中,样品用乙腈-水溶液均质,超声波辅助提取,液-液分配。两种方法所得到的提取液分别用Envi-18柱和PSA柱净化后进行气相色谱-质谱(GC-MS)分析。采用选择离子扫描(SIM)方式,外标法定量。该方法简便、快速,在优化的样品前处理条件和GC-MS分析条件下,方法的检出限(S/N=3)为0.001～0.026 mg/kg;在加标水平为0.25 mg/kg时,采用方法Ⅰ时的回收率为72%～113%,相对标准偏差（RSDs）为3.4%～12.1%;采用方法Ⅱ时的回收率为51%～127%(其中回收率为70%～120%的占94%),RSDs为3.2%～13.8%。     

定向进化提高枯草芽孢杆菌脂肪酶的活力

通过定向进化的方法, 提高了一个新的源于枯草芽孢杆菌 (Bacillus subtilis) 的脂肪酶 (BSL2) 的活力. 经过两轮易错 PCR 以及高通量筛选, 最终获得了比活力为野生出发酶 4.5 倍的突变体 3-1B2. 基因比对结果表明, 共有两个氨基酸发生了突变. 突变酶的酶学性质研究发现, 与野生酶相比, 它的热稳定性及 pH 稳定性略有增加, 最适温度和最适 pH 值则无太大的变化. 同源模建了 BSL2 与 3-1B2 的结构, 并与底物进行了分子对接. 结果表明, 突变体 3-1B2 的结合能比野生型 BSL2 低 1.29 kcal/mol, 活性中心 Ser77 残基与底物羰基的距离也由 0.319 nm 减小为 0.278 nm, 因而加快了酶反应速度, 提高了酶活力.     

高效液相色谱-串联质谱法测定蜂蜜中残留的19种喹诺酮类药物

建立了高效液相色谱-电喷雾串联质谱联用测定蜂蜜中恩诺沙星、环丙沙星、诺氟沙星、氧氟沙星、双氟沙星、恶喹酸、氟甲喹、沙拉沙星、司帕沙星、丹诺沙星、氟罗沙星、马波沙星、伊诺沙星、奥比沙星、吡哌酸、培氟沙星、洛美沙星、西诺沙星和萘啶酸等19种喹诺酮类药物残留的方法。比较酸性溶液阳离子固相萃取(PCX柱)、近中性缓冲溶液反相固相萃取（HLB柱）和碱性溶液阴离子固相萃取(PAX柱)3种不同提取净化方法的提取效果,最终选择使用碱性溶液溶解蜂蜜样品,强阴离子固相萃取柱一步富集净化。以甲醇和0.1%甲酸溶液作为流动相,C18作为分析色谱柱,采用梯度洗脱方式进行液相色谱分离,选择离子反应监测模式检测19种喹诺酮类药物,内标方法定量。在1～100 μg/L范围内,19种喹诺酮类药物的线性相关系数均大于0.991。通过实际样品的添加回收试验,方法的定量限（S/N=10）为1.0 μg/kg,3个添加水平的回收率为71%～118%,相对标准偏差为4.2%～6.7%。