An X-ray imaging device based on a GEM detector with delay-line readout

An X-ray imaging device based on a triple-GEM (Gas Electron Multiplier) detector, a fast delay-line circuit with 700 MHz cut-off frequency and two dimensional readout strips with 150 μm width on the top and 250 μm width on the bottom, is designed and tested. The localization information is derived from the propagation time of the induced signals on the readout strips. This device has a good spatial resolution of 150 μm and works stably at an intensity of 105 Hz/mm2 with 8 keV X-rays.     

Unified fission model for proton emission

The unified fission model (UFM) combining with the phenomenological assault frequency has been carried out to investigate the proton-radioactivity half-lives of spherical proton emitters. The results are in good agreement with the experimental data and other theoretical values, and newly observed spherical proton emitters have been analyzed. Finally, the effect of angular momentum transfer on half-life of proton emission has been discussed in detail and a formula can be used to describe this relationship.     

Study of q and η' physics at BES-Ⅲ

Decays of both η and η' provide very useful information in our understanding of low-energy QCD,and experimental signatures for these decays would be extremely helpful at BES-Ⅲ.The rare decays of the η and η' mesons could serve as a low-energy test of the Standard Model and its beyond.The sensitivities of the measurements of η and η' decays are discussed at BES-Ⅲ,in which the η and η' mesons are produced in the ψ decays.     

Top pair production in the littlest Higgs model with T-parity

In the framework of the littlest Higgs model with T-parity,we study the top pair production at the next generation colliders like LHC and ILC.We find that the order O(αs) corrections to the standard model top pair production cross section at LHC can be very small and the magnitude is below 1%.However,the magnitude of corrections to the standard model top pair production rate at ILC may be over 5% for reasonable values'of the parameters.Besides this,the corrections to the asymmetry ALR(tt) may be more sizable. Therefore,the top pair production at ILC may serve as a probe of the littlest Higgs model with T-parity,especially the asymmetry ALR(tt).     

Next-to-leading-order calculation in kT factorization

We explain the framework for calculating next-to-leading-order (NLO) corrections to exclusive processes in the kT factorization theorem, taking πγ→γ T as an example. Partons off-shell by k2T are considered in both the quark diagrams from full QCD and the effective diagrams for the pion wave function. The gauge dependences in the above two sets of diagrams cancel, when deriving the kT-dependent hard kernel as their difference. The light-cone singularities in the kT-dependent pion wave function are regularized by rotating the Wilson lines away from the light cone. Both the large double logarithms In2 kT and ln2x, x being a parton momentum fraction, arise from the loop correction to the virtual photon vertex, the former being absorbed into the pion wave function, and the latter into a jet function.     

High Performance Micro-Structure Sensor Based on TiO2 Nanofibers for Ethanol Detection

TiO2 nanofibers are synthesized via a simple electrospinning method and coated on a silicon substrate with Pt electrodes to fabricate a micro-structure sensor. This sensor exhibits high ethanol sensing properties at 300℃. The sensitivity is up to 4 when the sensor is exposed to 1 ppm ethanol, the response time is about 3s, and the recovery is about 5 s.     

逐步增加的Ⅱ型截尾下冷贮备串联系统可靠性指标的Bayes估计

在逐步增加的Ⅱ型截尾模型下,运用Bayes方法,研究部件寿命服从双参数指数分布的冷贮备串联系统可靠性指标的近似置信区间问题.在两个参数均未知的情形下,给出了失效率,系统可靠度及平均寿命的Bayes近似置信区间的计算公式;对于超参数的确定,给出一种新的方法;最后进行了随机模拟,并对近似置信区间的精度进行了讨论.     

数字图像注入式红外目标捕获跟踪训练仿真

介绍一种利用数字图像注入构建目标环境来完成目标捕获跟踪仿真训练任务的新方法,该方法通过模拟目标的理论航迹,实时接收并解算编码器输出值,同时与目标的运动方程做综合处理,计算出目标的位置信息,最后在背景中合成目标后按照红外图像的格式将数字图像注入到数字图像处理系统中。该方法可以在不开启红外相机的情况下,方便地完成手动及自动跟踪的训练任务,节约了训练成本,并已成功运用到某光电跟瞄设备的仿真训练系统中。     

脉冲强磁场下稀土材料的发光行为研究

脉冲强磁场具有峰值磁场强及扫场速度快的特点,在一个磁场脉冲内可获得从零场到最高磁场强度的全部数据,因而测量结果具有较高的精确度和对比度。稀土发光材料因具有发光谱线丰富、发光效率高的特点,在照明、显示和传感等领域有着广泛的应用。在强磁场作用下,稀土发光材料展现出发光强度和颜色可调的特征,在磁场传感、磁场标定和磁控发光器件等方面有重要应用价值。文章利用武汉国家脉冲强磁场科学中心磁光测量装置,系统地研究了铒、铕等稀土元素掺杂的发光材料在脉冲强磁场作用下的发光光谱、发光强度以及精细能级结构等特征随磁场变化的规律,初步探索了脉冲强磁场下的磁光谱在晶体结构分析、能级结构确定、磁场标定以及磁场传感等方面的应用。     

Investigation of GeSe2-In2Se3-AgI Chalcogenide Glasses

采用传统熔融-淬冷法制备了一系列新型(100-x)(4GeSe2-In2Se3)-xAgI(x=20,30,40 mol％)硫系玻璃样品.利用X射线衍射分析、差热分析、可见-近红外吸收光谱、红外透过光谱、喇曼分析等技术手段研究了该玻璃系统的组成、结构、热稳定性和光学特性等.利用Tauc方程计算出了样品的间接带隙;测试了部分样品在不同升温速率下的差示扫描量热曲线,并采用Kissinger法计算了玻璃样品的析晶活化能.X射线衍射数据表明,该玻璃体系在较宽的组分范围内有良好的非晶特性,成玻范围较宽;差热分析和析晶动力学研究表明,玻璃样品70(4GeSe2 -In2Se3) -30 AgI具有较好的热稳定性(△T-114℃)和较高的活化能(Ea=320.4 kJ/mol).随着AgI含量的增加,玻璃的短波吸收限蓝移,并且光学带隙有增大的趋势.此外,红外透过光谱分析表明该玻璃体系具有良好的红外透过性能,其红外截止波长不会随着AgI含量的增加而发生明显变化,皆为16μm左右.